From: Jani Nikula Date: Thu, 14 Nov 2013 10:13:41 +0000 (+0200) Subject: drm/i915: do full backlight setup at enable time X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=b35684b8fa94e04f55fd38bf672b737741d2f9e2;p=openwrt%2Fstaging%2Fblogic.git drm/i915: do full backlight setup at enable time We should now have all the information we need to do a full initialization of the backlight registers. v2: Keep QUIRK_NO_PCH_PWM_ENABLE for now (Imre). Signed-off-by: Jani Nikula Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 0e8f0a3d3bf6..0986472d4254 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -719,50 +719,75 @@ static void pch_enable_backlight(struct intel_connector *connector) enum pipe pipe = intel_get_pipe_from_connector(connector); enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, pipe); - u32 tmp; - - tmp = I915_READ(BLC_PWM_CPU_CTL2); + u32 cpu_ctl2, pch_ctl1, pch_ctl2; - /* Note that this can also get called through dpms changes. And - * we don't track the backlight dpms state, hence check whether - * we have to do anything first. */ - if (tmp & BLM_PWM_ENABLE) - return; + cpu_ctl2 = I915_READ(BLC_PWM_CPU_CTL2); + if (cpu_ctl2 & BLM_PWM_ENABLE) { + WARN(1, "cpu backlight already enabled\n"); + cpu_ctl2 &= ~BLM_PWM_ENABLE; + I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2); + } - if (INTEL_INFO(dev)->num_pipes == 3) - tmp &= ~BLM_PIPE_SELECT_IVB; - else - tmp &= ~BLM_PIPE_SELECT; + pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); + if (pch_ctl1 & BLM_PCH_PWM_ENABLE) { + DRM_DEBUG_KMS("pch backlight already enabled\n"); + pch_ctl1 &= ~BLM_PCH_PWM_ENABLE; + I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1); + } if (cpu_transcoder == TRANSCODER_EDP) - tmp |= BLM_TRANSCODER_EDP; + cpu_ctl2 = BLM_TRANSCODER_EDP; else - tmp |= BLM_PIPE(cpu_transcoder); - tmp &= ~BLM_PWM_ENABLE; - - I915_WRITE(BLC_PWM_CPU_CTL2, tmp); + cpu_ctl2 = BLM_PIPE(cpu_transcoder); + I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2); POSTING_READ(BLC_PWM_CPU_CTL2); - I915_WRITE(BLC_PWM_CPU_CTL2, tmp | BLM_PWM_ENABLE); - - if (!(dev_priv->quirks & QUIRK_NO_PCH_PWM_ENABLE)) { - tmp = I915_READ(BLC_PWM_PCH_CTL1); - tmp |= BLM_PCH_PWM_ENABLE; - tmp &= ~BLM_PCH_OVERRIDE_ENABLE; - I915_WRITE(BLC_PWM_PCH_CTL1, tmp); - } + I915_WRITE(BLC_PWM_CPU_CTL2, cpu_ctl2 | BLM_PWM_ENABLE); - /* - * Call below after setting BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1. - * BLC_PWM_CPU_CTL may be cleared to zero automatically when these - * registers are set. - */ + /* This won't stick until the above enable. */ intel_panel_actually_set_backlight(connector, panel->backlight.level); + + pch_ctl2 = panel->backlight.max << 16; + I915_WRITE(BLC_PWM_PCH_CTL2, pch_ctl2); + + /* XXX: transitional */ + if (dev_priv->quirks & QUIRK_NO_PCH_PWM_ENABLE) + return; + + pch_ctl1 = 0; + if (panel->backlight.active_low_pwm) + pch_ctl1 |= BLM_PCH_POLARITY; + I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1); + POSTING_READ(BLC_PWM_PCH_CTL1); + I915_WRITE(BLC_PWM_PCH_CTL1, pch_ctl1 | BLM_PCH_PWM_ENABLE); } static void i9xx_enable_backlight(struct intel_connector *connector) { + struct drm_device *dev = connector->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; + u32 ctl, freq; + + ctl = I915_READ(BLC_PWM_CTL); + if (ctl & BACKLIGHT_DUTY_CYCLE_MASK_PNV) { + WARN(1, "backlight already enabled\n"); + I915_WRITE(BLC_PWM_CTL, 0); + } + freq = panel->backlight.max; + if (panel->backlight.combination_mode) + freq /= 0xff; + + ctl = freq << 17; + if (IS_GEN2(dev) && panel->backlight.combination_mode) + ctl |= BLM_LEGACY_MODE; + if (IS_PINEVIEW(dev) && panel->backlight.active_low_pwm) + ctl |= BLM_POLARITY_PNV; + + I915_WRITE(BLC_PWM_CTL, ctl); + POSTING_READ(BLC_PWM_CTL); + + /* XXX: combine this into above write? */ intel_panel_actually_set_backlight(connector, panel->backlight.level); } @@ -772,25 +797,33 @@ static void i965_enable_backlight(struct intel_connector *connector) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; enum pipe pipe = intel_get_pipe_from_connector(connector); - u32 tmp; + u32 ctl, ctl2, freq; - tmp = I915_READ(BLC_PWM_CTL2); + ctl2 = I915_READ(BLC_PWM_CTL2); + if (ctl2 & BLM_PWM_ENABLE) { + WARN(1, "backlight already enabled\n"); + ctl2 &= ~BLM_PWM_ENABLE; + I915_WRITE(BLC_PWM_CTL2, ctl2); + } - /* Note that this can also get called through dpms changes. And - * we don't track the backlight dpms state, hence check whether - * we have to do anything first. */ - if (tmp & BLM_PWM_ENABLE) - return; + freq = panel->backlight.max; + if (panel->backlight.combination_mode) + freq /= 0xff; - tmp &= ~BLM_PIPE_SELECT; - tmp |= BLM_PIPE(pipe); - tmp &= ~BLM_PWM_ENABLE; - - I915_WRITE(BLC_PWM_CTL2, tmp); - POSTING_READ(BLC_PWM_CTL2); - I915_WRITE(BLC_PWM_CTL2, tmp | BLM_PWM_ENABLE); + ctl = freq << 16; + I915_WRITE(BLC_PWM_CTL, ctl); + /* XXX: combine this into above write? */ intel_panel_actually_set_backlight(connector, panel->backlight.level); + + ctl2 = BLM_PIPE(pipe); + if (panel->backlight.combination_mode) + ctl2 |= BLM_COMBINATION_MODE; + if (panel->backlight.active_low_pwm) + ctl2 |= BLM_POLARITY_I965; + I915_WRITE(BLC_PWM_CTL2, ctl2); + POSTING_READ(BLC_PWM_CTL2); + I915_WRITE(BLC_PWM_CTL2, ctl2 | BLM_PWM_ENABLE); } static void vlv_enable_backlight(struct intel_connector *connector) @@ -799,23 +832,27 @@ static void vlv_enable_backlight(struct intel_connector *connector) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_panel *panel = &connector->panel; enum pipe pipe = intel_get_pipe_from_connector(connector); - u32 tmp; + u32 ctl, ctl2; - tmp = I915_READ(VLV_BLC_PWM_CTL2(pipe)); + ctl2 = I915_READ(VLV_BLC_PWM_CTL2(pipe)); + if (ctl2 & BLM_PWM_ENABLE) { + WARN(1, "backlight already enabled\n"); + ctl2 &= ~BLM_PWM_ENABLE; + I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2); + } - /* Note that this can also get called through dpms changes. And - * we don't track the backlight dpms state, hence check whether - * we have to do anything first. */ - if (tmp & BLM_PWM_ENABLE) - return; + ctl = panel->backlight.max << 16; + I915_WRITE(VLV_BLC_PWM_CTL(pipe), ctl); - tmp &= ~BLM_PWM_ENABLE; + /* XXX: combine this into above write? */ + intel_panel_actually_set_backlight(connector, panel->backlight.level); - I915_WRITE(VLV_BLC_PWM_CTL2(pipe), tmp); + ctl2 = 0; + if (panel->backlight.active_low_pwm) + ctl2 |= BLM_POLARITY_I965; + I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2); POSTING_READ(VLV_BLC_PWM_CTL2(pipe)); - I915_WRITE(VLV_BLC_PWM_CTL2(pipe), tmp | BLM_PWM_ENABLE); - - intel_panel_actually_set_backlight(connector, panel->backlight.level); + I915_WRITE(VLV_BLC_PWM_CTL2(pipe), ctl2 | BLM_PWM_ENABLE); } void intel_panel_enable_backlight(struct intel_connector *connector)