From: Shashank Sharma Date: Tue, 1 Sep 2015 14:11:44 +0000 (+0530) Subject: drm/i915/bxt: DSI disable and post-disable X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=b389a45c6b2f9b310ddf631d23b9e3e045cf747b;p=openwrt%2Fstaging%2Fblogic.git drm/i915/bxt: DSI disable and post-disable This patch contains changes to support DSI disble sequence in BXT. The changes are: 1. BXT specific changes in clear_device_ready function. 2. BXT specific changes in DSI disable and post-disable functions. 3. Add a new function to reset BXT Dphy clock and dividers (bxt_dsi_reset_clocks). 4. Moved some part of the vlv clock reset code, in a new function (vlv_dsi_reset_clocks) maintaining the exact same sequence. 5. Wrapper function to call corresponding reset clock function. v2: Fixed Jani's review comments. v3: Removed the GET_DSI_PORT_CTRL Macro for consistency with earlier implementations as per Jani's suggestion. Signed-off-by: Uma Shankar Signed-off-by: Shashank Sharma Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index b7eae5248f47..505501e808a2 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -417,12 +417,15 @@ static void intel_dsi_port_disable(struct intel_encoder *encoder) struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); enum port port; u32 temp; + u32 port_ctrl; for_each_dsi_port(port, intel_dsi->ports) { /* de-assert ip_tg_enable signal */ - temp = I915_READ(MIPI_PORT_CTRL(port)); - I915_WRITE(MIPI_PORT_CTRL(port), temp & ~DPI_ENABLE); - POSTING_READ(MIPI_PORT_CTRL(port)); + port_ctrl = IS_BROXTON(dev) ? BXT_MIPI_PORT_CTRL(port) : + MIPI_PORT_CTRL(port); + temp = I915_READ(port_ctrl); + I915_WRITE(port_ctrl, temp & ~DPI_ENABLE); + POSTING_READ(port_ctrl); } } @@ -554,12 +557,7 @@ static void intel_dsi_disable(struct intel_encoder *encoder) /* Panel commands can be sent when clock is in LP11 */ I915_WRITE(MIPI_DEVICE_READY(port), 0x0); - temp = I915_READ(MIPI_CTRL(port)); - temp &= ~ESCAPE_CLOCK_DIVIDER_MASK; - I915_WRITE(MIPI_CTRL(port), temp | - intel_dsi->escape_clk_div << - ESCAPE_CLOCK_DIVIDER_SHIFT); - + intel_dsi_reset_clocks(encoder, port); I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); temp = I915_READ(MIPI_DSI_FUNC_PRG(port)); @@ -578,10 +576,12 @@ static void intel_dsi_disable(struct intel_encoder *encoder) static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) { + struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); enum port port; u32 val; + u32 port_ctrl = 0; DRM_DEBUG_KMS("\n"); for_each_dsi_port(port, intel_dsi->ports) { @@ -598,18 +598,22 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) ULPS_STATE_ENTER); usleep_range(2000, 2500); + if (IS_BROXTON(dev)) + port_ctrl = BXT_MIPI_PORT_CTRL(port); + else if (IS_VALLEYVIEW(dev)) + /* Common bit for both MIPI Port A & MIPI Port C */ + port_ctrl = MIPI_PORT_CTRL(PORT_A); + /* Wait till Clock lanes are in LP-00 state for MIPI Port A * only. MIPI Port C has no similar bit for checking */ - if (wait_for(((I915_READ(MIPI_PORT_CTRL(PORT_A)) & AFE_LATCHOUT) - == 0x00000), 30)) + if (wait_for(((I915_READ(port_ctrl) & AFE_LATCHOUT) + == 0x00000), 30)) DRM_ERROR("DSI LP not going Low\n"); - /* Disable MIPI PHY transparent latch - * Common bit for both MIPI Port A & MIPI Port C - */ - val = I915_READ(MIPI_PORT_CTRL(PORT_A)); - I915_WRITE(MIPI_PORT_CTRL(PORT_A), val & ~LP_OUTPUT_HOLD); + /* Disable MIPI PHY transparent latch */ + val = I915_READ(port_ctrl); + I915_WRITE(port_ctrl, val & ~LP_OUTPUT_HOLD); usleep_range(1000, 1500); I915_WRITE(MIPI_DEVICE_READY(port), 0x00); diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h index 5cc46b4131f7..797a61245495 100644 --- a/drivers/gpu/drm/i915/intel_dsi.h +++ b/drivers/gpu/drm/i915/intel_dsi.h @@ -127,6 +127,8 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder) extern void intel_enable_dsi_pll(struct intel_encoder *encoder); extern void intel_disable_dsi_pll(struct intel_encoder *encoder); extern u32 vlv_get_dsi_pclk(struct intel_encoder *encoder, int pipe_bpp); +extern void intel_dsi_reset_clocks(struct intel_encoder *encoder, + enum port port); struct drm_panel *vbt_panel_init(struct intel_dsi *intel_dsi, u16 panel_id); diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c index 386336281997..c9a38f4dec2d 100644 --- a/drivers/gpu/drm/i915/intel_dsi_pll.c +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c @@ -384,6 +384,19 @@ u32 vlv_get_dsi_pclk(struct intel_encoder *encoder, int pipe_bpp) return pclk; } +void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) +{ + u32 temp; + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + + temp = I915_READ(MIPI_CTRL(port)); + temp &= ~ESCAPE_CLOCK_DIVIDER_MASK; + I915_WRITE(MIPI_CTRL(port), temp | + intel_dsi->escape_clk_div << + ESCAPE_CLOCK_DIVIDER_SHIFT); +} + /* Program BXT Mipi clocks and dividers */ static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port) { @@ -528,3 +541,29 @@ void intel_disable_dsi_pll(struct intel_encoder *encoder) else if (IS_BROXTON(dev)) bxt_disable_dsi_pll(encoder); } + +void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) +{ + u32 tmp; + struct drm_device *dev = encoder->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + /* Clear old configurations */ + tmp = I915_READ(BXT_MIPI_CLOCK_CTL); + tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port)); + tmp &= ~(BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port)); + tmp &= ~(BXT_MIPI_ESCLK_VAR_DIV_MASK(port)); + tmp &= ~(BXT_MIPI_DPHY_DIVIDER_MASK(port)); + I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp); + I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); +} + +void intel_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) +{ + struct drm_device *dev = encoder->base.dev; + + if (IS_BROXTON(dev)) + bxt_dsi_reset_clocks(encoder, port); + else if (IS_VALLEYVIEW(dev)) + vlv_dsi_reset_clocks(encoder, port); +}