From: Adrian Bunk Date: Thu, 11 Jan 2007 13:49:44 +0000 (+0100) Subject: more ftape removal X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=b3a242b75361936ab9a42c42c44ea35e79a9d4cd;p=openwrt%2Fstaging%2Fblogic.git more ftape removal This patch removes some more ftape code. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 862e483cce8a..8c634f9df39f 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -129,7 +129,6 @@ header-y += posix_types.h header-y += ppdev.h header-y += prctl.h header-y += ps2esdi.h -header-y += qic117.h header-y += qnxtypes.h header-y += quotaio_v1.h header-y += quotaio_v2.h diff --git a/include/linux/mtio.h b/include/linux/mtio.h index 8c66151821e3..6f8d2d45a8fb 100644 --- a/include/linux/mtio.h +++ b/include/linux/mtio.h @@ -10,7 +10,6 @@ #include #include -#include /* * Structures and definitions for mag tape io control commands @@ -116,32 +115,6 @@ struct mtget { #define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */ #define MT_ISFTAPE_FLAG 0x800000 -struct mt_tape_info { - long t_type; /* device type id (mt_type) */ - char *t_name; /* descriptive name */ -}; - -#define MT_TAPE_INFO { \ - {MT_ISUNKNOWN, "Unknown type of tape device"}, \ - {MT_ISQIC02, "Generic QIC-02 tape streamer"}, \ - {MT_ISWT5150, "Wangtek 5150, QIC-150"}, \ - {MT_ISARCHIVE_5945L2, "Archive 5945L-2"}, \ - {MT_ISCMSJ500, "CMS Jumbo 500"}, \ - {MT_ISTDC3610, "Tandberg TDC 3610, QIC-24"}, \ - {MT_ISARCHIVE_VP60I, "Archive VP60i, QIC-02"}, \ - {MT_ISARCHIVE_2150L, "Archive Viper 2150L"}, \ - {MT_ISARCHIVE_2060L, "Archive Viper 2060L"}, \ - {MT_ISARCHIVESC499, "Archive SC-499 QIC-36 controller"}, \ - {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \ - {MT_ISWT5099EEN24, "Wangtek 5099-een24, 60MB"}, \ - {MT_ISTEAC_MT2ST, "Teac MT-2ST 155mb data cassette drive"}, \ - {MT_ISEVEREX_FT40A, "Everex FT40A, QIC-40"}, \ - {MT_ISONSTREAM_SC, "OnStream SC-, DI-, DP-, or USB tape drive"}, \ - {MT_ISSCSI1, "Generic SCSI-1 tape"}, \ - {MT_ISSCSI2, "Generic SCSI-2 tape"}, \ - {0, NULL} \ -} - /* structure for MTIOCPOS - mag tape get position command */ @@ -150,130 +123,11 @@ struct mtpos { }; -/* structure for MTIOCVOLINFO, query information about the volume - * currently positioned at (zftape) - */ -struct mtvolinfo { - unsigned int mt_volno; /* vol-number */ - unsigned int mt_blksz; /* blocksize used when recording */ - unsigned int mt_rawsize; /* raw tape space consumed, in kb */ - unsigned int mt_size; /* volume size after decompression, in kb */ - unsigned int mt_cmpr:1; /* this volume has been compressed */ -}; - -/* raw access to a floppy drive, read and write an arbitrary segment. - * For ftape/zftape to support formatting etc. - */ -#define MT_FT_RD_SINGLE 0 -#define MT_FT_RD_AHEAD 1 -#define MT_FT_WR_ASYNC 0 /* start tape only when all buffers are full */ -#define MT_FT_WR_MULTI 1 /* start tape, continue until buffers are empty */ -#define MT_FT_WR_SINGLE 2 /* write a single segment and stop afterwards */ -#define MT_FT_WR_DELETE 3 /* write deleted data marks, one segment at time */ - -struct mtftseg -{ - unsigned mt_segno; /* the segment to read or write */ - unsigned mt_mode; /* modes for read/write (sync/async etc.) */ - int mt_result; /* result of r/w request, not of the ioctl */ - void __user *mt_data; /* User space buffer: must be 29kb */ -}; - -/* get tape capacity (ftape/zftape) - */ -struct mttapesize { - unsigned long mt_capacity; /* entire, uncompressed capacity - * of a cartridge - */ - unsigned long mt_used; /* what has been used so far, raw - * uncompressed amount - */ -}; - -/* possible values of the ftfmt_op field - */ -#define FTFMT_SET_PARMS 1 /* set software parms */ -#define FTFMT_GET_PARMS 2 /* get software parms */ -#define FTFMT_FORMAT_TRACK 3 /* start formatting a tape track */ -#define FTFMT_STATUS 4 /* monitor formatting a tape track */ -#define FTFMT_VERIFY 5 /* verify the given segment */ - -struct ftfmtparms { - unsigned char ft_qicstd; /* QIC-40/QIC-80/QIC-3010/QIC-3020 */ - unsigned char ft_fmtcode; /* Refer to the QIC specs */ - unsigned char ft_fhm; /* floppy head max */ - unsigned char ft_ftm; /* floppy track max */ - unsigned short ft_spt; /* segments per track */ - unsigned short ft_tpc; /* tracks per cartridge */ -}; - -struct ftfmttrack { - unsigned int ft_track; /* track to format */ - unsigned char ft_gap3; /* size of gap3, for FORMAT_TRK */ -}; - -struct ftfmtstatus { - unsigned int ft_segment; /* segment currently being formatted */ -}; - -struct ftfmtverify { - unsigned int ft_segment; /* segment to verify */ - unsigned long ft_bsm; /* bsm as result of VERIFY cmd */ -}; - -struct mtftformat { - unsigned int fmt_op; /* operation to perform */ - union fmt_arg { - struct ftfmtparms fmt_parms; /* format parameters */ - struct ftfmttrack fmt_track; /* ctrl while formatting */ - struct ftfmtstatus fmt_status; - struct ftfmtverify fmt_verify; /* for verifying */ - } fmt_arg; -}; - -struct mtftcmd { - unsigned int ft_wait_before; /* timeout to wait for drive to get ready - * before command is sent. Milliseconds - */ - qic117_cmd_t ft_cmd; /* command to send */ - unsigned char ft_parm_cnt; /* zero: no parm is sent. */ - unsigned char ft_parms[3]; /* parameter(s) to send to - * the drive. The parms are nibbles - * driver sends cmd + 2 step pulses */ - unsigned int ft_result_bits; /* if non zero, number of bits - * returned by the tape drive - */ - unsigned int ft_result; /* the result returned by the tape drive*/ - unsigned int ft_wait_after; /* timeout to wait for drive to get ready - * after command is sent. 0: don't wait */ - int ft_status; /* status returned by ready wait - * undefined if timeout was 0. - */ - int ft_error; /* error code if error status was set by - * command - */ -}; - /* mag tape io control commands */ #define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */ #define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */ #define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */ -/* The next two are used by the QIC-02 driver for runtime reconfiguration. - * See tpqic02.h for struct mtconfiginfo. - */ -#define MTIOCGETCONFIG _IOR('m', 4, struct mtconfiginfo) /* get tape config */ -#define MTIOCSETCONFIG _IOW('m', 5, struct mtconfiginfo) /* set tape config */ - -/* the next six are used by the floppy ftape drivers and its frontends - * sorry, but MTIOCTOP commands are write only. - */ -#define MTIOCRDFTSEG _IOWR('m', 6, struct mtftseg) /* read a segment */ -#define MTIOCWRFTSEG _IOWR('m', 7, struct mtftseg) /* write a segment */ -#define MTIOCVOLINFO _IOR('m', 8, struct mtvolinfo) /* info about volume */ -#define MTIOCGETSIZE _IOR('m', 9, struct mttapesize)/* get cartridge size*/ -#define MTIOCFTFORMAT _IOWR('m', 10, struct mtftformat) /* format ftape */ -#define MTIOCFTCMD _IOWR('m', 11, struct mtftcmd) /* send QIC-117 cmd */ /* Generic Mag Tape (device independent) status macros for examining * mt_gstat -- HP-UX compatible. diff --git a/include/linux/qic117.h b/include/linux/qic117.h deleted file mode 100644 index 07b537e5d359..000000000000 --- a/include/linux/qic117.h +++ /dev/null @@ -1,290 +0,0 @@ -#ifndef _QIC117_H -#define _QIC117_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/include/linux/qic117.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:32 $ - * - * This file contains QIC-117 spec. related definitions for the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - * - * These data were taken from the Quarter-Inch Cartridge - * Drive Standards, Inc. document titled: - * `Common Command Set Interface Specification for Flexible - * Disk Controller Based Minicartridge Tape Drives' - * document QIC-117 Revision J, 28 Aug 96. - * For more information, contact: - * Quarter-Inch Cartridge Drive Standards, Inc. - * 311 East Carrillo Street - * Santa Barbara, California 93101 - * Telephone (805) 963-3853 - * Fax (805) 962-1541 - * WWW http://www.qic.org - * - * Current QIC standard revisions (of interest) are: - * QIC-40-MC, Rev. M, 2 Sep 92. - * QIC-80-MC, Rev. N, 20 Mar 96. - * QIC-80-MC, Rev. K, 15 Dec 94. - * QIC-113, Rev. G, 15 Jun 95. - * QIC-117, Rev. J, 28 Aug 96. - * QIC-122, Rev. B, 6 Mar 91. - * QIC-130, Rev. C, 2 Sep 92. - * QIC-3010-MC, Rev. F, 14 Jun 95. - * QIC-3020-MC, Rev. G, 31 Aug 95. - * QIC-CRF3, Rev. B, 15 Jun 95. - * */ - -/* - * QIC-117 common command set rev. J. - * These commands are sent to the tape unit - * as number of pulses over the step line. - */ - -typedef enum { - QIC_NO_COMMAND = 0, - QIC_RESET = 1, - QIC_REPORT_NEXT_BIT = 2, - QIC_PAUSE = 3, - QIC_MICRO_STEP_PAUSE = 4, - QIC_ALTERNATE_TIMEOUT = 5, - QIC_REPORT_DRIVE_STATUS = 6, - QIC_REPORT_ERROR_CODE = 7, - QIC_REPORT_DRIVE_CONFIGURATION = 8, - QIC_REPORT_ROM_VERSION = 9, - QIC_LOGICAL_FORWARD = 10, - QIC_PHYSICAL_REVERSE = 11, - QIC_PHYSICAL_FORWARD = 12, - QIC_SEEK_HEAD_TO_TRACK = 13, - QIC_SEEK_LOAD_POINT = 14, - QIC_ENTER_FORMAT_MODE = 15, - QIC_WRITE_REFERENCE_BURST = 16, - QIC_ENTER_VERIFY_MODE = 17, - QIC_STOP_TAPE = 18, -/* commands 19-20: reserved */ - QIC_MICRO_STEP_HEAD_UP = 21, - QIC_MICRO_STEP_HEAD_DOWN = 22, - QIC_SOFT_SELECT = 23, - QIC_SOFT_DESELECT = 24, - QIC_SKIP_REVERSE = 25, - QIC_SKIP_FORWARD = 26, - QIC_SELECT_RATE = 27, -/* command 27, in ccs2: Select Rate or Format */ - QIC_ENTER_DIAGNOSTIC_1 = 28, - QIC_ENTER_DIAGNOSTIC_2 = 29, - QIC_ENTER_PRIMARY_MODE = 30, -/* command 31: vendor unique */ - QIC_REPORT_VENDOR_ID = 32, - QIC_REPORT_TAPE_STATUS = 33, - QIC_SKIP_EXTENDED_REVERSE = 34, - QIC_SKIP_EXTENDED_FORWARD = 35, - QIC_CALIBRATE_TAPE_LENGTH = 36, - QIC_REPORT_FORMAT_SEGMENTS = 37, - QIC_SET_FORMAT_SEGMENTS = 38, -/* commands 39-45: reserved */ - QIC_PHANTOM_SELECT = 46, - QIC_PHANTOM_DESELECT = 47 -} qic117_cmd_t; - -typedef enum { - discretional = 0, required, ccs1, ccs2 -} qic_compatibility; - -typedef enum { - unused, mode, motion, report -} command_types; - -struct qic117_command_table { - char *name; - __u8 mask; - __u8 state; - __u8 cmd_type; - __u8 non_intr; - __u8 level; -}; - -#define QIC117_COMMANDS {\ -/* command mask state cmd_type */\ -/* | name | | | non_intr */\ -/* | | | | | | level */\ -/* 0*/ {NULL, 0x00, 0x00, mode, 0, discretional},\ -/* 1*/ {"soft reset", 0x00, 0x00, motion, 1, required},\ -/* 2*/ {"report next bit", 0x00, 0x00, report, 0, required},\ -/* 3*/ {"pause", 0x36, 0x24, motion, 1, required},\ -/* 4*/ {"micro step pause", 0x36, 0x24, motion, 1, required},\ -/* 5*/ {"alternate command timeout", 0x00, 0x00, mode, 0, required},\ -/* 6*/ {"report drive status", 0x00, 0x00, report, 0, required},\ -/* 7*/ {"report error code", 0x01, 0x01, report, 0, required},\ -/* 8*/ {"report drive configuration",0x00, 0x00, report, 0, required},\ -/* 9*/ {"report rom version", 0x00, 0x00, report, 0, required},\ -/*10*/ {"logical forward", 0x37, 0x25, motion, 0, required},\ -/*11*/ {"physical reverse", 0x17, 0x05, motion, 0, required},\ -/*12*/ {"physical forward", 0x17, 0x05, motion, 0, required},\ -/*13*/ {"seek head to track", 0x37, 0x25, motion, 0, required},\ -/*14*/ {"seek load point", 0x17, 0x05, motion, 1, required},\ -/*15*/ {"enter format mode", 0x1f, 0x05, mode, 0, required},\ -/*16*/ {"write reference burst", 0x1f, 0x05, motion, 1, required},\ -/*17*/ {"enter verify mode", 0x37, 0x25, mode, 0, required},\ -/*18*/ {"stop tape", 0x00, 0x00, motion, 1, required},\ -/*19*/ {"reserved (19)", 0x00, 0x00, unused, 0, discretional},\ -/*20*/ {"reserved (20)", 0x00, 0x00, unused, 0, discretional},\ -/*21*/ {"micro step head up", 0x02, 0x00, motion, 0, required},\ -/*22*/ {"micro step head down", 0x02, 0x00, motion, 0, required},\ -/*23*/ {"soft select", 0x00, 0x00, mode, 0, discretional},\ -/*24*/ {"soft deselect", 0x00, 0x00, mode, 0, discretional},\ -/*25*/ {"skip segments reverse", 0x36, 0x24, motion, 1, required},\ -/*26*/ {"skip segments forward", 0x36, 0x24, motion, 1, required},\ -/*27*/ {"select rate or format", 0x03, 0x01, mode, 0, required /* [ccs2] */},\ -/*28*/ {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional},\ -/*29*/ {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional},\ -/*30*/ {"enter primary mode", 0x00, 0x00, mode, 0, required},\ -/*31*/ {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional},\ -/*32*/ {"report vendor id", 0x00, 0x00, report, 0, required},\ -/*33*/ {"report tape status", 0x04, 0x04, report, 0, ccs1},\ -/*34*/ {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1},\ -/*35*/ {"skip extended forward", 0x36, 0x24, motion, 1, ccs1},\ -/*36*/ {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2},\ -/*37*/ {"report format segments", 0x17, 0x05, report, 0, ccs2},\ -/*38*/ {"set format segments", 0x17, 0x05, mode, 0, ccs2},\ -/*39*/ {"reserved (39)", 0x00, 0x00, unused, 0, discretional},\ -/*40*/ {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional},\ -/*41*/ {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional},\ -/*42*/ {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional},\ -/*43*/ {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional},\ -/*44*/ {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional},\ -/*45*/ {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional},\ -/*46*/ {"phantom select", 0x00, 0x00, mode, 0, discretional},\ -/*47*/ {"phantom deselect", 0x00, 0x00, mode, 0, discretional},\ -} - -/* - * Status bits returned by QIC_REPORT_DRIVE_STATUS - */ - -#define QIC_STATUS_READY 0x01 /* Drive is ready or idle. */ -#define QIC_STATUS_ERROR 0x02 /* Error detected, must read - error code to clear this */ -#define QIC_STATUS_CARTRIDGE_PRESENT 0x04 /* Tape is present */ -#define QIC_STATUS_WRITE_PROTECT 0x08 /* Tape is write protected */ -#define QIC_STATUS_NEW_CARTRIDGE 0x10 /* New cartridge inserted, must - read error status to clear. */ -#define QIC_STATUS_REFERENCED 0x20 /* Cartridge appears to have been - formatted. */ -#define QIC_STATUS_AT_BOT 0x40 /* Cartridge is at physical - beginning of tape. */ -#define QIC_STATUS_AT_EOT 0x80 /* Cartridge is at physical end - of tape. */ -/* - * Status bits returned by QIC_REPORT_DRIVE_CONFIGURATION - */ - -#define QIC_CONFIG_RATE_MASK 0x18 -#define QIC_CONFIG_RATE_SHIFT 3 -#define QIC_CONFIG_RATE_250 0 -#define QIC_CONFIG_RATE_500 2 -#define QIC_CONFIG_RATE_1000 3 -#define QIC_CONFIG_RATE_2000 1 -#define QIC_CONFIG_RATE_4000 0 /* since QIC-117 Rev. J */ - -#define QIC_CONFIG_LONG 0x40 /* Extra Length Tape Detected */ -#define QIC_CONFIG_80 0x80 /* QIC-80 detected. */ - -/* - * Status bits returned by QIC_REPORT_TAPE_STATUS - */ - -#define QIC_TAPE_STD_MASK 0x0f -#define QIC_TAPE_QIC40 0x01 -#define QIC_TAPE_QIC80 0x02 -#define QIC_TAPE_QIC3020 0x03 -#define QIC_TAPE_QIC3010 0x04 - -#define QIC_TAPE_LEN_MASK 0x70 -#define QIC_TAPE_205FT 0x10 -#define QIC_TAPE_307FT 0x20 -#define QIC_TAPE_VARIABLE 0x30 -#define QIC_TAPE_1100FT 0x40 -#define QIC_TAPE_FLEX 0x60 - -#define QIC_TAPE_WIDE 0x80 - -/* Define a value (in feet) slightly higher than - * the possible maximum tape length. - */ -#define QIC_TOP_TAPE_LEN 1500 - -/* - * Errors: List of error codes, and their severity. - */ - -typedef struct { - char *message; /* Text describing the error. */ - unsigned int fatal:1; /* Non-zero if the error is fatal. */ -} ftape_error; - -#define QIC117_ERRORS {\ - /* 0*/ { "No error", 0, },\ - /* 1*/ { "Command Received while Drive Not Ready", 0, },\ - /* 2*/ { "Cartridge Not Present or Removed", 1, },\ - /* 3*/ { "Motor Speed Error (not within 1%)", 1, },\ - /* 4*/ { "Motor Speed Fault (jammed, or gross speed error", 1, },\ - /* 5*/ { "Cartridge Write Protected", 1, },\ - /* 6*/ { "Undefined or Reserved Command Code", 1, },\ - /* 7*/ { "Illegal Track Address Specified for Seek", 1, },\ - /* 8*/ { "Illegal Command in Report Subcontext", 0, },\ - /* 9*/ { "Illegal Entry into a Diagnostic Mode", 1, },\ - /*10*/ { "Broken Tape Detected (based on hole sensor)", 1, },\ - /*11*/ { "Warning--Read Gain Setting Error", 1, },\ - /*12*/ { "Command Received While Error Status Pending (obs)", 1, },\ - /*13*/ { "Command Received While New Cartridge Pending", 1, },\ - /*14*/ { "Command Illegal or Undefined in Primary Mode", 1, },\ - /*15*/ { "Command Illegal or Undefined in Format Mode", 1, },\ - /*16*/ { "Command Illegal or Undefined in Verify Mode", 1, },\ - /*17*/ { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, },\ - /*18*/ { "Logical EOT Before All Segments generated", 1, },\ - /*19*/ { "Command Illegal When Cartridge Not Referenced", 1, },\ - /*20*/ { "Self-Diagnostic Failed (cannot be cleared)", 1, },\ - /*21*/ { "Warning EEPROM Not Initialized, Defaults Set", 1, },\ - /*22*/ { "EEPROM Corrupted or Hardware Failure", 1, },\ - /*23*/ { "Motion Time-out Error", 1, },\ - /*24*/ { "Data Segment Too Long -- Logical Forward or Pause", 1, },\ - /*25*/ { "Transmit Overrun (obs)", 1, },\ - /*26*/ { "Power On Reset Occurred", 0, },\ - /*27*/ { "Software Reset Occurred", 0, },\ - /*28*/ { "Diagnostic Mode 1 Error", 1, },\ - /*29*/ { "Diagnostic Mode 2 Error", 1, },\ - /*30*/ { "Command Received During Non-Interruptible Process", 1, },\ - /*31*/ { "Rate or Format Selection Error", 1, },\ - /*32*/ { "Illegal Command While in High Speed Mode", 1, },\ - /*33*/ { "Illegal Seek Segment Value", 1, },\ - /*34*/ { "Invalid Media", 1, },\ - /*35*/ { "Head Positioning Failure", 1, },\ - /*36*/ { "Write Reference Burst Failure", 1, },\ - /*37*/ { "Prom Code Missing", 1, },\ - /*38*/ { "Invalid Format", 1, },\ - /*39*/ { "EOT/BOT System Failure", 1, },\ - /*40*/ { "Prom A Checksum Error", 1, },\ - /*41*/ { "Drive Wakeup Reset Occurred", 1, },\ - /*42*/ { "Prom B Checksum Error", 1, },\ - /*43*/ { "Illegal Entry into Format Mode", 1, },\ -} - -#endif /* _QIC117_H */