From: Aleksander Jan Bajkowski Date: Tue, 8 Mar 2022 20:20:37 +0000 (+0100) Subject: lantiq: xrx200: replace patch with upstream version X-Git-Tag: v23.05.0-rc1~3859 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=b4970dab6b0c3e13715f4b13de42d72a74c1c9e9;p=openwrt%2Fopenwrt.git lantiq: xrx200: replace patch with upstream version This commit replaces patch number 0703 with the upstream accepted version. This patch requires backporting an additional patch to avoid conflicts. The only significant change is the lower maximum MTU. Packets with lengths over 2400 may be dropped. Signed-off-by: Aleksander Jan Bajkowski --- diff --git a/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch b/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch deleted file mode 100644 index 6593e43db7..0000000000 --- a/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch +++ /dev/null @@ -1,101 +0,0 @@ -From 24a43ae2ac0ea06c474b1c80dc75651294d49321 Mon Sep 17 00:00:00 2001 -From: Thomas Nixon -Date: Sat, 2 Oct 2021 00:48:05 +0100 -Subject: [PATCH 2/2] net: lantiq: enable jumbo frames on GSWIP - -This enables non-standard MTUs on a per-port basis, with the overall -frame size set based on the CPU port. - -When the MTU is not changed, this should have no effect. - -Long packets crash the switch with MTUs of greater than 2526, so the -maximum is limited for now. - -Signed-off-by: Thomas Nixon ---- - drivers/net/dsa/lantiq_gswip.c | 46 +++++++++++++++++++++++++++++++--- - 1 file changed, 42 insertions(+), 4 deletions(-) - ---- a/drivers/net/dsa/lantiq_gswip.c -+++ b/drivers/net/dsa/lantiq_gswip.c -@@ -238,6 +238,11 @@ - - #define XRX200_GPHY_FW_ALIGN (16 * 1024) - -+/* maximum packet size supported by the switch; in theory this should be 9600, -+ * but long packets currently cause lock-ups with an MTU of over 2526 -+ */ -+#define GSWIP_MAX_PACKET_LENGTH 2556 -+ - struct gswip_hw_info { - int max_ports; - int cpu_port; -@@ -856,10 +861,6 @@ static int gswip_setup(struct dsa_switch - gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS, - GSWIP_PCE_PCTRL_0p(cpu_port)); - -- gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, -- GSWIP_MAC_CTRL_2p(cpu_port)); -- gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN, -- GSWIP_MAC_FLEN); - gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD, - GSWIP_BM_QUEUE_GCTRL); - -@@ -876,6 +877,8 @@ static int gswip_setup(struct dsa_switch - return err; - } - -+ ds->mtu_enforcement_ingress = true; -+ - gswip_port_enable(ds, cpu_port, NULL); - return 0; - } -@@ -1438,6 +1441,39 @@ static int gswip_port_fdb_dump(struct ds - return 0; - } - -+static int gswip_port_max_mtu(struct dsa_switch *ds, int port) -+{ -+ /* includes 8 bytes for special header */ -+ return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; -+} -+ -+static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) -+{ -+ struct gswip_priv *priv = ds->priv; -+ int cpu_port = priv->hw_info->cpu_port; -+ -+ /* cpu port always has maximum mtu of user ports, so use it to set -+ * switch frame size, including 8 byte special header -+ */ -+ if (port == cpu_port) { -+ new_mtu += 8; -+ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN, -+ GSWIP_MAC_FLEN); -+ } -+ -+ /* enable MLEN for ports with non-standard MTUs, including the special -+ * header on the CPU port added above -+ */ -+ if (new_mtu != ETH_DATA_LEN) -+ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, -+ GSWIP_MAC_CTRL_2p(port)); -+ else -+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0, -+ GSWIP_MAC_CTRL_2p(port)); -+ -+ return 0; -+} -+ - static void gswip_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) -@@ -1781,6 +1817,8 @@ static const struct dsa_switch_ops gswip - .port_fdb_add = gswip_port_fdb_add, - .port_fdb_del = gswip_port_fdb_del, - .port_fdb_dump = gswip_port_fdb_dump, -+ .port_change_mtu = gswip_port_change_mtu, -+ .port_max_mtu = gswip_port_max_mtu, - .phylink_validate = gswip_phylink_validate, - .phylink_mac_config = gswip_phylink_mac_config, - .phylink_mac_link_down = gswip_phylink_mac_link_down, diff --git a/target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch b/target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch new file mode 100644 index 0000000000..77c0eb6354 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch @@ -0,0 +1,122 @@ +From 1488fc204568f707fe2a42a913788c00a95af30e Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Fri, 17 Dec 2021 01:07:40 +0100 +Subject: [PATCH] net: lantiq_xrx200: increase buffer reservation + +If the user sets a lower mtu on the CPU port than on the switch, +then DMA inserts a few more bytes into the buffer than expected. +In the worst case, it may exceed the size of the buffer. The +experiments showed that the buffer should be a multiple of the +burst length value. This patch rounds the length of the rx buffer +upwards and fixes this bug. The reservation of FCS space in the +buffer has been removed as PMAC strips the FCS. + +Fixes: 998ac358019e ("net: lantiq: add support for jumbo frames") +Reported-by: Thomas Nixon +Signed-off-by: Aleksander Jan Bajkowski +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/lantiq_xrx200.c | 34 ++++++++++++++++++++-------- + 1 file changed, 24 insertions(+), 10 deletions(-) + +--- a/drivers/net/ethernet/lantiq_xrx200.c ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -70,6 +70,8 @@ struct xrx200_priv { + struct xrx200_chan chan_tx; + struct xrx200_chan chan_rx; + ++ u16 rx_buf_size; ++ + struct net_device *net_dev; + struct device *dev; + +@@ -96,6 +98,16 @@ static void xrx200_pmac_mask(struct xrx2 + xrx200_pmac_w32(priv, val, offset); + } + ++static int xrx200_max_frame_len(int mtu) ++{ ++ return VLAN_ETH_HLEN + mtu; ++} ++ ++static int xrx200_buffer_size(int mtu) ++{ ++ return round_up(xrx200_max_frame_len(mtu), 4 * XRX200_DMA_BURST_LEN); ++} ++ + /* drop all the packets from the DMA ring */ + static void xrx200_flush_dma(struct xrx200_chan *ch) + { +@@ -108,8 +120,7 @@ static void xrx200_flush_dma(struct xrx2 + break; + + desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | +- (ch->priv->net_dev->mtu + VLAN_ETH_HLEN + +- ETH_FCS_LEN); ++ ch->priv->rx_buf_size; + ch->dma.desc++; + ch->dma.desc %= LTQ_DESC_NUM; + } +@@ -157,21 +168,21 @@ static int xrx200_close(struct net_devic + + static int xrx200_alloc_skb(struct xrx200_chan *ch) + { +- int len = ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; + struct sk_buff *skb = ch->skb[ch->dma.desc]; ++ struct xrx200_priv *priv = ch->priv; + dma_addr_t mapping; + int ret = 0; + +- ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev, +- len); ++ ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(priv->net_dev, ++ priv->rx_buf_size); + if (!ch->skb[ch->dma.desc]) { + ret = -ENOMEM; + goto skip; + } + +- mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data, +- len, DMA_FROM_DEVICE); +- if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) { ++ mapping = dma_map_single(priv->dev, ch->skb[ch->dma.desc]->data, ++ priv->rx_buf_size, DMA_FROM_DEVICE); ++ if (unlikely(dma_mapping_error(priv->dev, mapping))) { + dev_kfree_skb_any(ch->skb[ch->dma.desc]); + ch->skb[ch->dma.desc] = skb; + ret = -ENOMEM; +@@ -183,7 +194,7 @@ static int xrx200_alloc_skb(struct xrx20 + wmb(); + skip: + ch->dma.desc_base[ch->dma.desc].ctl = +- LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | len; ++ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | priv->rx_buf_size; + + return ret; + } +@@ -355,6 +366,7 @@ xrx200_change_mtu(struct net_device *net + int ret = 0; + + net_dev->mtu = new_mtu; ++ priv->rx_buf_size = xrx200_buffer_size(new_mtu); + + if (new_mtu <= old_mtu) + return ret; +@@ -374,6 +386,7 @@ xrx200_change_mtu(struct net_device *net + ret = xrx200_alloc_skb(ch_rx); + if (ret) { + net_dev->mtu = old_mtu; ++ priv->rx_buf_size = xrx200_buffer_size(old_mtu); + break; + } + dev_kfree_skb_any(skb); +@@ -504,7 +517,8 @@ static int xrx200_probe(struct platform_ + net_dev->netdev_ops = &xrx200_netdev_ops; + SET_NETDEV_DEV(net_dev, dev); + net_dev->min_mtu = ETH_ZLEN; +- net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN; ++ net_dev->max_mtu = XRX200_DMA_DATA_LEN - xrx200_max_frame_len(0); ++ priv->rx_buf_size = xrx200_buffer_size(ETH_DATA_LEN); + + /* load the memory ranges */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch b/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch deleted file mode 100644 index 77c0eb6354..0000000000 --- a/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch +++ /dev/null @@ -1,122 +0,0 @@ -From 1488fc204568f707fe2a42a913788c00a95af30e Mon Sep 17 00:00:00 2001 -From: Aleksander Jan Bajkowski -Date: Fri, 17 Dec 2021 01:07:40 +0100 -Subject: [PATCH] net: lantiq_xrx200: increase buffer reservation - -If the user sets a lower mtu on the CPU port than on the switch, -then DMA inserts a few more bytes into the buffer than expected. -In the worst case, it may exceed the size of the buffer. The -experiments showed that the buffer should be a multiple of the -burst length value. This patch rounds the length of the rx buffer -upwards and fixes this bug. The reservation of FCS space in the -buffer has been removed as PMAC strips the FCS. - -Fixes: 998ac358019e ("net: lantiq: add support for jumbo frames") -Reported-by: Thomas Nixon -Signed-off-by: Aleksander Jan Bajkowski -Signed-off-by: Jakub Kicinski ---- - drivers/net/ethernet/lantiq_xrx200.c | 34 ++++++++++++++++++++-------- - 1 file changed, 24 insertions(+), 10 deletions(-) - ---- a/drivers/net/ethernet/lantiq_xrx200.c -+++ b/drivers/net/ethernet/lantiq_xrx200.c -@@ -70,6 +70,8 @@ struct xrx200_priv { - struct xrx200_chan chan_tx; - struct xrx200_chan chan_rx; - -+ u16 rx_buf_size; -+ - struct net_device *net_dev; - struct device *dev; - -@@ -96,6 +98,16 @@ static void xrx200_pmac_mask(struct xrx2 - xrx200_pmac_w32(priv, val, offset); - } - -+static int xrx200_max_frame_len(int mtu) -+{ -+ return VLAN_ETH_HLEN + mtu; -+} -+ -+static int xrx200_buffer_size(int mtu) -+{ -+ return round_up(xrx200_max_frame_len(mtu), 4 * XRX200_DMA_BURST_LEN); -+} -+ - /* drop all the packets from the DMA ring */ - static void xrx200_flush_dma(struct xrx200_chan *ch) - { -@@ -108,8 +120,7 @@ static void xrx200_flush_dma(struct xrx2 - break; - - desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | -- (ch->priv->net_dev->mtu + VLAN_ETH_HLEN + -- ETH_FCS_LEN); -+ ch->priv->rx_buf_size; - ch->dma.desc++; - ch->dma.desc %= LTQ_DESC_NUM; - } -@@ -157,21 +168,21 @@ static int xrx200_close(struct net_devic - - static int xrx200_alloc_skb(struct xrx200_chan *ch) - { -- int len = ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; - struct sk_buff *skb = ch->skb[ch->dma.desc]; -+ struct xrx200_priv *priv = ch->priv; - dma_addr_t mapping; - int ret = 0; - -- ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev, -- len); -+ ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(priv->net_dev, -+ priv->rx_buf_size); - if (!ch->skb[ch->dma.desc]) { - ret = -ENOMEM; - goto skip; - } - -- mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data, -- len, DMA_FROM_DEVICE); -- if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) { -+ mapping = dma_map_single(priv->dev, ch->skb[ch->dma.desc]->data, -+ priv->rx_buf_size, DMA_FROM_DEVICE); -+ if (unlikely(dma_mapping_error(priv->dev, mapping))) { - dev_kfree_skb_any(ch->skb[ch->dma.desc]); - ch->skb[ch->dma.desc] = skb; - ret = -ENOMEM; -@@ -183,7 +194,7 @@ static int xrx200_alloc_skb(struct xrx20 - wmb(); - skip: - ch->dma.desc_base[ch->dma.desc].ctl = -- LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | len; -+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | priv->rx_buf_size; - - return ret; - } -@@ -355,6 +366,7 @@ xrx200_change_mtu(struct net_device *net - int ret = 0; - - net_dev->mtu = new_mtu; -+ priv->rx_buf_size = xrx200_buffer_size(new_mtu); - - if (new_mtu <= old_mtu) - return ret; -@@ -374,6 +386,7 @@ xrx200_change_mtu(struct net_device *net - ret = xrx200_alloc_skb(ch_rx); - if (ret) { - net_dev->mtu = old_mtu; -+ priv->rx_buf_size = xrx200_buffer_size(old_mtu); - break; - } - dev_kfree_skb_any(skb); -@@ -504,7 +517,8 @@ static int xrx200_probe(struct platform_ - net_dev->netdev_ops = &xrx200_netdev_ops; - SET_NETDEV_DEV(net_dev, dev); - net_dev->min_mtu = ETH_ZLEN; -- net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN; -+ net_dev->max_mtu = XRX200_DMA_DATA_LEN - xrx200_max_frame_len(0); -+ priv->rx_buf_size = xrx200_buffer_size(ETH_DATA_LEN); - - /* load the memory ranges */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch b/target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch new file mode 100644 index 0000000000..f2c36952fc --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch @@ -0,0 +1,104 @@ +From c3e6b2c35b34214c58c1e90d65dab5f5393608e7 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Mon, 3 Jan 2022 20:43:16 +0100 +Subject: [PATCH] net: lantiq_xrx200: add ingress SG DMA support + +This patch adds support for scatter gather DMA. DMA in PMAC splits +the packet into several buffers when the MTU on the CPU port is +less than the MTU of the switch. The first buffer starts at an +offset of NET_IP_ALIGN. In subsequent buffers, dma ignores the +offset. Thanks to this patch, the user can still connect to the +device in such a situation. For normal configurations, the patch +has no effect on performance. + +Signed-off-by: Aleksander Jan Bajkowski +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/lantiq_xrx200.c | 47 +++++++++++++++++++++++----- + 1 file changed, 40 insertions(+), 7 deletions(-) + +--- a/drivers/net/ethernet/lantiq_xrx200.c ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -26,6 +26,9 @@ + #define XRX200_DMA_RX 0 + #define XRX200_DMA_TX 1 + ++#define XRX200_DMA_PACKET_COMPLETE 0 ++#define XRX200_DMA_PACKET_IN_PROGRESS 1 ++ + /* cpu port mac */ + #define PMAC_RX_IPG 0x0024 + #define PMAC_RX_IPG_MASK 0xf +@@ -61,6 +64,9 @@ struct xrx200_chan { + struct ltq_dma_channel dma; + struct sk_buff *skb[LTQ_DESC_NUM]; + ++ struct sk_buff *skb_head; ++ struct sk_buff *skb_tail; ++ + struct xrx200_priv *priv; + }; + +@@ -204,7 +210,8 @@ static int xrx200_hw_receive(struct xrx2 + struct xrx200_priv *priv = ch->priv; + struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; + struct sk_buff *skb = ch->skb[ch->dma.desc]; +- int len = (desc->ctl & LTQ_DMA_SIZE_MASK); ++ u32 ctl = desc->ctl; ++ int len = (ctl & LTQ_DMA_SIZE_MASK); + struct net_device *net_dev = priv->net_dev; + int ret; + +@@ -220,12 +227,36 @@ static int xrx200_hw_receive(struct xrx2 + } + + skb_put(skb, len); +- skb->protocol = eth_type_trans(skb, net_dev); +- netif_receive_skb(skb); +- net_dev->stats.rx_packets++; +- net_dev->stats.rx_bytes += len; + +- return 0; ++ /* add buffers to skb via skb->frag_list */ ++ if (ctl & LTQ_DMA_SOP) { ++ ch->skb_head = skb; ++ ch->skb_tail = skb; ++ } else if (ch->skb_head) { ++ if (ch->skb_head == ch->skb_tail) ++ skb_shinfo(ch->skb_tail)->frag_list = skb; ++ else ++ ch->skb_tail->next = skb; ++ ch->skb_tail = skb; ++ skb_reserve(ch->skb_tail, -NET_IP_ALIGN); ++ ch->skb_head->len += skb->len; ++ ch->skb_head->data_len += skb->len; ++ ch->skb_head->truesize += skb->truesize; ++ } ++ ++ if (ctl & LTQ_DMA_EOP) { ++ ch->skb_head->protocol = eth_type_trans(ch->skb_head, net_dev); ++ netif_receive_skb(ch->skb_head); ++ net_dev->stats.rx_packets++; ++ net_dev->stats.rx_bytes += ch->skb_head->len; ++ ch->skb_head = NULL; ++ ch->skb_tail = NULL; ++ ret = XRX200_DMA_PACKET_COMPLETE; ++ } else { ++ ret = XRX200_DMA_PACKET_IN_PROGRESS; ++ } ++ ++ return ret; + } + + static int xrx200_poll_rx(struct napi_struct *napi, int budget) +@@ -240,7 +271,9 @@ static int xrx200_poll_rx(struct napi_st + + if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { + ret = xrx200_hw_receive(ch); +- if (ret) ++ if (ret == XRX200_DMA_PACKET_IN_PROGRESS) ++ continue; ++ if (ret != XRX200_DMA_PACKET_COMPLETE) + return ret; + rx++; + } else { diff --git a/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch b/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch new file mode 100644 index 0000000000..c0911ef874 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch @@ -0,0 +1,275 @@ +From a09d042b086202735c4ed64573cdd79933020001 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Mon, 22 Mar 2021 21:37:15 +0100 +Subject: [PATCH] net: dsa: lantiq: allow to use all GPHYs on xRX300 and xRX330 + +This patch allows to use all PHYs on GRX300 and GRX330. The ARX300 +has 3 and the GRX330 has 4 integrated PHYs connected to different +ports compared to VRX200. Each integrated PHY can work as single +Gigabit Ethernet PHY (GMII) or as double Fast Ethernet PHY (MII). + +Allowed port configurations: + +xRX200: +GMAC0: RGMII, MII, REVMII or RMII port +GMAC1: RGMII, MII, REVMII or RMII port +GMAC2: GPHY0 (GMII) +GMAC3: GPHY0 (MII) +GMAC4: GPHY1 (GMII) +GMAC5: GPHY1 (MII) or RGMII port + +xRX300: +GMAC0: RGMII port +GMAC1: GPHY2 (GMII) +GMAC2: GPHY0 (GMII) +GMAC3: GPHY0 (MII) +GMAC4: GPHY1 (GMII) +GMAC5: GPHY1 (MII) or RGMII port + +xRX330: +GMAC0: RGMII, GMII or RMII port +GMAC1: GPHY2 (GMII) +GMAC2: GPHY0 (GMII) +GMAC3: GPHY0 (MII) or GPHY3 (GMII) +GMAC4: GPHY1 (GMII) +GMAC5: GPHY1 (MII), RGMII or RMII port + +Tested on D-Link DWR966 (xRX330) with OpenWRT. + +Signed-off-by: Aleksander Jan Bajkowski +Acked-by: Hauke Mehrtens +Signed-off-by: David S. Miller +--- + drivers/net/dsa/lantiq_gswip.c | 142 ++++++++++++++++++++++++++------- + 1 file changed, 113 insertions(+), 29 deletions(-) + +--- a/drivers/net/dsa/lantiq_gswip.c ++++ b/drivers/net/dsa/lantiq_gswip.c +@@ -1,6 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0 + /* +- * Lantiq / Intel GSWIP switch driver for VRX200 SoCs ++ * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs + * + * Copyright (C) 2010 Lantiq Deutschland + * Copyright (C) 2012 John Crispin +@@ -104,6 +104,7 @@ + #define GSWIP_MII_CFG_MODE_RMIIP 0x2 + #define GSWIP_MII_CFG_MODE_RMIIM 0x3 + #define GSWIP_MII_CFG_MODE_RGMII 0x4 ++#define GSWIP_MII_CFG_MODE_GMII 0x9 + #define GSWIP_MII_CFG_MODE_MASK 0xf + #define GSWIP_MII_CFG_RATE_M2P5 0x00 + #define GSWIP_MII_CFG_RATE_M25 0x10 +@@ -241,6 +242,7 @@ + struct gswip_hw_info { + int max_ports; + int cpu_port; ++ const struct dsa_switch_ops *ops; + }; + + struct xway_gphy_match_data { +@@ -1438,12 +1440,42 @@ static int gswip_port_fdb_dump(struct ds + return 0; + } + +-static void gswip_phylink_validate(struct dsa_switch *ds, int port, +- unsigned long *supported, +- struct phylink_link_state *state) ++static void gswip_phylink_set_capab(unsigned long *supported, ++ struct phylink_link_state *state) + { + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + ++ /* Allow all the expected bits */ ++ phylink_set(mask, Autoneg); ++ phylink_set_port_modes(mask); ++ phylink_set(mask, Pause); ++ phylink_set(mask, Asym_Pause); ++ ++ /* With the exclusion of MII, Reverse MII and Reduced MII, we ++ * support Gigabit, including Half duplex ++ */ ++ if (state->interface != PHY_INTERFACE_MODE_MII && ++ state->interface != PHY_INTERFACE_MODE_REVMII && ++ state->interface != PHY_INTERFACE_MODE_RMII) { ++ phylink_set(mask, 1000baseT_Full); ++ phylink_set(mask, 1000baseT_Half); ++ } ++ ++ phylink_set(mask, 10baseT_Half); ++ phylink_set(mask, 10baseT_Full); ++ phylink_set(mask, 100baseT_Half); ++ phylink_set(mask, 100baseT_Full); ++ ++ bitmap_and(supported, supported, mask, ++ __ETHTOOL_LINK_MODE_MASK_NBITS); ++ bitmap_and(state->advertising, state->advertising, mask, ++ __ETHTOOL_LINK_MODE_MASK_NBITS); ++} ++ ++static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port, ++ unsigned long *supported, ++ struct phylink_link_state *state) ++{ + switch (port) { + case 0: + case 1: +@@ -1470,38 +1502,54 @@ static void gswip_phylink_validate(struc + return; + } + +- /* Allow all the expected bits */ +- phylink_set(mask, Autoneg); +- phylink_set_port_modes(mask); +- phylink_set(mask, Pause); +- phylink_set(mask, Asym_Pause); ++ gswip_phylink_set_capab(supported, state); + +- /* With the exclusion of MII, Reverse MII and Reduced MII, we +- * support Gigabit, including Half duplex +- */ +- if (state->interface != PHY_INTERFACE_MODE_MII && +- state->interface != PHY_INTERFACE_MODE_REVMII && +- state->interface != PHY_INTERFACE_MODE_RMII) { +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseT_Half); ++ return; ++ ++unsupported: ++ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); ++ dev_err(ds->dev, "Unsupported interface '%s' for port %d\n", ++ phy_modes(state->interface), port); ++} ++ ++static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port, ++ unsigned long *supported, ++ struct phylink_link_state *state) ++{ ++ switch (port) { ++ case 0: ++ if (!phy_interface_mode_is_rgmii(state->interface) && ++ state->interface != PHY_INTERFACE_MODE_GMII && ++ state->interface != PHY_INTERFACE_MODE_RMII) ++ goto unsupported; ++ break; ++ case 1: ++ case 2: ++ case 3: ++ case 4: ++ if (state->interface != PHY_INTERFACE_MODE_INTERNAL) ++ goto unsupported; ++ break; ++ case 5: ++ if (!phy_interface_mode_is_rgmii(state->interface) && ++ state->interface != PHY_INTERFACE_MODE_INTERNAL && ++ state->interface != PHY_INTERFACE_MODE_RMII) ++ goto unsupported; ++ break; ++ default: ++ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); ++ dev_err(ds->dev, "Unsupported port: %i\n", port); ++ return; + } + +- phylink_set(mask, 10baseT_Half); +- phylink_set(mask, 10baseT_Full); +- phylink_set(mask, 100baseT_Half); +- phylink_set(mask, 100baseT_Full); ++ gswip_phylink_set_capab(supported, state); + +- bitmap_and(supported, supported, mask, +- __ETHTOOL_LINK_MODE_MASK_NBITS); +- bitmap_and(state->advertising, state->advertising, mask, +- __ETHTOOL_LINK_MODE_MASK_NBITS); + return; + + unsupported: + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + dev_err(ds->dev, "Unsupported interface '%s' for port %d\n", + phy_modes(state->interface), port); +- return; + } + + static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) +@@ -1639,6 +1687,9 @@ static void gswip_phylink_mac_config(str + case PHY_INTERFACE_MODE_RGMII_TXID: + miicfg |= GSWIP_MII_CFG_MODE_RGMII; + break; ++ case PHY_INTERFACE_MODE_GMII: ++ miicfg |= GSWIP_MII_CFG_MODE_GMII; ++ break; + default: + dev_err(ds->dev, + "Unsupported interface: %d\n", state->interface); +@@ -1765,7 +1816,7 @@ static int gswip_get_sset_count(struct d + return ARRAY_SIZE(gswip_rmon_cnt); + } + +-static const struct dsa_switch_ops gswip_switch_ops = { ++static const struct dsa_switch_ops gswip_xrx200_switch_ops = { + .get_tag_protocol = gswip_get_tag_protocol, + .setup = gswip_setup, + .port_enable = gswip_port_enable, +@@ -1781,7 +1832,31 @@ static const struct dsa_switch_ops gswip + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, +- .phylink_validate = gswip_phylink_validate, ++ .phylink_validate = gswip_xrx200_phylink_validate, ++ .phylink_mac_config = gswip_phylink_mac_config, ++ .phylink_mac_link_down = gswip_phylink_mac_link_down, ++ .phylink_mac_link_up = gswip_phylink_mac_link_up, ++ .get_strings = gswip_get_strings, ++ .get_ethtool_stats = gswip_get_ethtool_stats, ++ .get_sset_count = gswip_get_sset_count, ++}; ++ ++static const struct dsa_switch_ops gswip_xrx300_switch_ops = { ++ .get_tag_protocol = gswip_get_tag_protocol, ++ .setup = gswip_setup, ++ .port_enable = gswip_port_enable, ++ .port_disable = gswip_port_disable, ++ .port_bridge_join = gswip_port_bridge_join, ++ .port_bridge_leave = gswip_port_bridge_leave, ++ .port_fast_age = gswip_port_fast_age, ++ .port_vlan_filtering = gswip_port_vlan_filtering, ++ .port_vlan_add = gswip_port_vlan_add, ++ .port_vlan_del = gswip_port_vlan_del, ++ .port_stp_state_set = gswip_port_stp_state_set, ++ .port_fdb_add = gswip_port_fdb_add, ++ .port_fdb_del = gswip_port_fdb_del, ++ .port_fdb_dump = gswip_port_fdb_dump, ++ .phylink_validate = gswip_xrx300_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down, + .phylink_mac_link_up = gswip_phylink_mac_link_up, +@@ -2043,7 +2118,7 @@ static int gswip_probe(struct platform_d + priv->ds->dev = dev; + priv->ds->num_ports = priv->hw_info->max_ports; + priv->ds->priv = priv; +- priv->ds->ops = &gswip_switch_ops; ++ priv->ds->ops = priv->hw_info->ops; + priv->dev = dev; + version = gswip_switch_r(priv, GSWIP_VERSION); + +@@ -2127,10 +2202,19 @@ static int gswip_remove(struct platform_ + static const struct gswip_hw_info gswip_xrx200 = { + .max_ports = 7, + .cpu_port = 6, ++ .ops = &gswip_xrx200_switch_ops, ++}; ++ ++static const struct gswip_hw_info gswip_xrx300 = { ++ .max_ports = 7, ++ .cpu_port = 6, ++ .ops = &gswip_xrx300_switch_ops, + }; + + static const struct of_device_id gswip_of_match[] = { + { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 }, ++ { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 }, ++ { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 }, + {}, + }; + MODULE_DEVICE_TABLE(of, gswip_of_match); diff --git a/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch b/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch deleted file mode 100644 index f2c36952fc..0000000000 --- a/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch +++ /dev/null @@ -1,104 +0,0 @@ -From c3e6b2c35b34214c58c1e90d65dab5f5393608e7 Mon Sep 17 00:00:00 2001 -From: Aleksander Jan Bajkowski -Date: Mon, 3 Jan 2022 20:43:16 +0100 -Subject: [PATCH] net: lantiq_xrx200: add ingress SG DMA support - -This patch adds support for scatter gather DMA. DMA in PMAC splits -the packet into several buffers when the MTU on the CPU port is -less than the MTU of the switch. The first buffer starts at an -offset of NET_IP_ALIGN. In subsequent buffers, dma ignores the -offset. Thanks to this patch, the user can still connect to the -device in such a situation. For normal configurations, the patch -has no effect on performance. - -Signed-off-by: Aleksander Jan Bajkowski -Signed-off-by: David S. Miller ---- - drivers/net/ethernet/lantiq_xrx200.c | 47 +++++++++++++++++++++++----- - 1 file changed, 40 insertions(+), 7 deletions(-) - ---- a/drivers/net/ethernet/lantiq_xrx200.c -+++ b/drivers/net/ethernet/lantiq_xrx200.c -@@ -26,6 +26,9 @@ - #define XRX200_DMA_RX 0 - #define XRX200_DMA_TX 1 - -+#define XRX200_DMA_PACKET_COMPLETE 0 -+#define XRX200_DMA_PACKET_IN_PROGRESS 1 -+ - /* cpu port mac */ - #define PMAC_RX_IPG 0x0024 - #define PMAC_RX_IPG_MASK 0xf -@@ -61,6 +64,9 @@ struct xrx200_chan { - struct ltq_dma_channel dma; - struct sk_buff *skb[LTQ_DESC_NUM]; - -+ struct sk_buff *skb_head; -+ struct sk_buff *skb_tail; -+ - struct xrx200_priv *priv; - }; - -@@ -204,7 +210,8 @@ static int xrx200_hw_receive(struct xrx2 - struct xrx200_priv *priv = ch->priv; - struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; - struct sk_buff *skb = ch->skb[ch->dma.desc]; -- int len = (desc->ctl & LTQ_DMA_SIZE_MASK); -+ u32 ctl = desc->ctl; -+ int len = (ctl & LTQ_DMA_SIZE_MASK); - struct net_device *net_dev = priv->net_dev; - int ret; - -@@ -220,12 +227,36 @@ static int xrx200_hw_receive(struct xrx2 - } - - skb_put(skb, len); -- skb->protocol = eth_type_trans(skb, net_dev); -- netif_receive_skb(skb); -- net_dev->stats.rx_packets++; -- net_dev->stats.rx_bytes += len; - -- return 0; -+ /* add buffers to skb via skb->frag_list */ -+ if (ctl & LTQ_DMA_SOP) { -+ ch->skb_head = skb; -+ ch->skb_tail = skb; -+ } else if (ch->skb_head) { -+ if (ch->skb_head == ch->skb_tail) -+ skb_shinfo(ch->skb_tail)->frag_list = skb; -+ else -+ ch->skb_tail->next = skb; -+ ch->skb_tail = skb; -+ skb_reserve(ch->skb_tail, -NET_IP_ALIGN); -+ ch->skb_head->len += skb->len; -+ ch->skb_head->data_len += skb->len; -+ ch->skb_head->truesize += skb->truesize; -+ } -+ -+ if (ctl & LTQ_DMA_EOP) { -+ ch->skb_head->protocol = eth_type_trans(ch->skb_head, net_dev); -+ netif_receive_skb(ch->skb_head); -+ net_dev->stats.rx_packets++; -+ net_dev->stats.rx_bytes += ch->skb_head->len; -+ ch->skb_head = NULL; -+ ch->skb_tail = NULL; -+ ret = XRX200_DMA_PACKET_COMPLETE; -+ } else { -+ ret = XRX200_DMA_PACKET_IN_PROGRESS; -+ } -+ -+ return ret; - } - - static int xrx200_poll_rx(struct napi_struct *napi, int budget) -@@ -240,7 +271,9 @@ static int xrx200_poll_rx(struct napi_st - - if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { - ret = xrx200_hw_receive(ch); -- if (ret) -+ if (ret == XRX200_DMA_PACKET_IN_PROGRESS) -+ continue; -+ if (ret != XRX200_DMA_PACKET_COMPLETE) - return ret; - rx++; - } else { diff --git a/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch b/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch new file mode 100644 index 0000000000..9d96883910 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch @@ -0,0 +1,127 @@ +From c40bb4fedcd6b8b6a714da5dd466eb88ed2652d1 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Wed, 9 Mar 2022 00:04:57 +0100 +Subject: net: dsa: lantiq_gswip: enable jumbo frames on GSWIP + +This enables non-standard MTUs on a per-port basis, with the overall +frame size set based on the CPU port. + +When the MTU is not changed, this should have no effect. + +Long packets crash the switch with MTUs of greater than 2526, so the +maximum is limited for now. Medium packets are sometimes dropped (e.g. +TCP over 2477, UDP over 2516-2519, ICMP over 2526), Hence an MTU value +of 2400 seems safe. + +Signed-off-by: Thomas Nixon +Signed-off-by: Aleksander Jan Bajkowski +Link: https://lore.kernel.org/r/20220308230457.1599237-1-olek2@wp.pl +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/lantiq_gswip.c | 53 ++++++++++++++++++++++++++++++++++++++---- + 1 file changed, 49 insertions(+), 4 deletions(-) + +--- a/drivers/net/dsa/lantiq_gswip.c ++++ b/drivers/net/dsa/lantiq_gswip.c +@@ -213,6 +213,7 @@ + #define GSWIP_MAC_CTRL_0_GMII_MII 0x0001 + #define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002 + #define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC)) ++#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */ + #define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */ + + /* Ethernet Switch Fetch DMA Port Control Register */ +@@ -239,6 +240,15 @@ + + #define XRX200_GPHY_FW_ALIGN (16 * 1024) + ++/* Maximum packet size supported by the switch. In theory this should be 10240, ++ * but long packets currently cause lock-ups with an MTU of over 2526. Medium ++ * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP ++ * over 2526), hence an MTU value of 2400 seems safe. This issue only affects ++ * packet reception. This is probably caused by the PPA engine, which is on the ++ * RX part of the device. Packet transmission works properly up to 10240. ++ */ ++#define GSWIP_MAX_PACKET_LENGTH 2400 ++ + struct gswip_hw_info { + int max_ports; + int cpu_port; +@@ -858,10 +868,6 @@ static int gswip_setup(struct dsa_switch + gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS, + GSWIP_PCE_PCTRL_0p(cpu_port)); + +- gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, +- GSWIP_MAC_CTRL_2p(cpu_port)); +- gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN, +- GSWIP_MAC_FLEN); + gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD, + GSWIP_BM_QUEUE_GCTRL); + +@@ -878,6 +884,8 @@ static int gswip_setup(struct dsa_switch + return err; + } + ++ ds->mtu_enforcement_ingress = true; ++ + gswip_port_enable(ds, cpu_port, NULL); + return 0; + } +@@ -1472,6 +1480,39 @@ static void gswip_phylink_set_capab(unsi + __ETHTOOL_LINK_MODE_MASK_NBITS); + } + ++static int gswip_port_max_mtu(struct dsa_switch *ds, int port) ++{ ++ /* Includes 8 bytes for special header. */ ++ return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; ++} ++ ++static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) ++{ ++ struct gswip_priv *priv = ds->priv; ++ int cpu_port = priv->hw_info->cpu_port; ++ ++ /* CPU port always has maximum mtu of user ports, so use it to set ++ * switch frame size, including 8 byte special header. ++ */ ++ if (port == cpu_port) { ++ new_mtu += 8; ++ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN, ++ GSWIP_MAC_FLEN); ++ } ++ ++ /* Enable MLEN for ports with non-standard MTUs, including the special ++ * header on the CPU port added above. ++ */ ++ if (new_mtu != ETH_DATA_LEN) ++ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, ++ GSWIP_MAC_CTRL_2p(port)); ++ else ++ gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0, ++ GSWIP_MAC_CTRL_2p(port)); ++ ++ return 0; ++} ++ + static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +@@ -1832,6 +1873,8 @@ static const struct dsa_switch_ops gswip + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, ++ .port_change_mtu = gswip_port_change_mtu, ++ .port_max_mtu = gswip_port_max_mtu, + .phylink_validate = gswip_xrx200_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down, +@@ -1856,6 +1899,8 @@ static const struct dsa_switch_ops gswip + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, ++ .port_change_mtu = gswip_port_change_mtu, ++ .port_max_mtu = gswip_port_max_mtu, + .phylink_validate = gswip_xrx300_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down,