From: Laurent Pinchart Date: Tue, 18 Jun 2013 10:29:48 +0000 (+0200) Subject: gpio-rcar: Reference core gpio documentation in the DT bindings X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=b559c3e8e7ca469921987925baf892ab2038396e;p=openwrt%2Fstaging%2Fblogic.git gpio-rcar: Reference core gpio documentation in the DT bindings Replaced the detailed gpio-ranges documentation with a reference to the code gpio DT bindings, and mention the gpio flags symbolic names. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 46d76a004246..cb3dc7bcd8e6 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -16,18 +16,12 @@ Required Properties: - gpio-controller: Marks the device node as a gpio controller. - #gpio-cells: Should be 2. The first cell is the GPIO number and the second - cell is used to specify optional parameters as bit flags. Only the GPIO - active low flag (bit 0) is currently supported. - - gpio-ranges: Range of pins managed by the GPIO controller as a 4-cells - tuple using the following syntax. - - <[phandle of the pin controller node] - 0 - [index of the first pin] - [number of pins]> - -Please refer to gpio.txt in this directory for details of the common GPIO -bindings used by client devices. + cell specifies GPIO flags, as defined in . Only the + GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. + - gpio-ranges: Range of pins managed by the GPIO controller. + +Please refer to gpio.txt in this directory for details of gpio-ranges property +and the common GPIO bindings used by client devices. Example: R8A7779 (R-Car H1) GPIO controller nodes