From: Christian Lamparter Date: Mon, 7 Nov 2016 17:10:09 +0000 (+0100) Subject: apm821xx: redo WAN green and yellow LEDs X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=b5638bb64e790350ca0203e7cff60a10766dae20;p=openwrt%2Fstaging%2Fyousong.git apm821xx: redo WAN green and yellow LEDs Because the WAN port is handled by the internal AR8327N switch, the device should use swconfig_leds trigger to handle the link activity of the WAN LED. This has the added bonus that the WAN LED will now go dark if there's no ethernet cable connected to the WAN port. Signed-off-by: Christian Lamparter --- diff --git a/target/linux/apm821xx/base-files/etc/board.d/01_leds b/target/linux/apm821xx/base-files/etc/board.d/01_leds index 80a22b8fd6..38cfbdcd7a 100755 --- a/target/linux/apm821xx/base-files/etc/board.d/01_leds +++ b/target/linux/apm821xx/base-files/etc/board.d/01_leds @@ -22,7 +22,8 @@ mbl) wndr4700) ucidef_set_led_ide "sata" "SATA" "wndr4700:green:hd" - ucidef_set_led_netdev "wan" "WAN (green)" "wndr4700:green:wan" "eth0.2" + ucidef_set_led_switch "wan_green" "WAN (green)" "wndr4700:green:wan" "switch0" "0x20" + ucidef_set_led_netdev "wan_yellow" "WAN (yellow)" "wndr4700:yellow:wan" "eth0.2" "tx rx" ucidef_set_led_usbport "usb3" "USB3" "wndr4700:blue:usb" "usb2-port1" "usb2-port2" "usb3-port1" "usb3-port2" ucidef_set_led_wlan "wlan2g" "WLAN2G" "wndr4700:blue:wlan" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "wndr4700:blue:wlan" "phy1tpt" diff --git a/target/linux/apm821xx/nand/config-default b/target/linux/apm821xx/nand/config-default index 5d5d2a4bf4..d6bdbd74e2 100644 --- a/target/linux/apm821xx/nand/config-default +++ b/target/linux/apm821xx/nand/config-default @@ -38,4 +38,6 @@ CONFIG_UBIFS_FS=y # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set CONFIG_SENSORS_LM90=y CONFIG_SENSORS_TC654=y +CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y CONFIG_WNDR4700=y