From: Filip Moc Date: Tue, 24 Nov 2020 21:15:26 +0000 (+0100) Subject: ramips: add support for TP-Link MR6400 v5 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=b641eb6ecfbfc2c6a488483332d4b5a6ee4c736c;p=openwrt%2Fstaging%2Faparcar.git ramips: add support for TP-Link MR6400 v5 TL-MR6400v5 is very similar to TL-MR6400v4. Main differences are: - smaller form factor - different LED GPIOs - different switch connections You can flash via tftp recovery: - serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24 - connect to any ethernet port - power on the device while holding the reset button - wait at least 8 seconds before releasing reset button Flashing via OEM web interface does not work. LTE module does not support DHCP so it must be configured via QMI. Hardware Specification (v5.0 EU): - SoC: MT7628NN - Flash: Winbond W25Q64JVS (8MiB) - RAM: ESMT M14D5121632A (64MiB) - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) - Ethernet: 1NIC (4x100M) - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) - Power: DC 9V 0.85A Signed-off-by: Filip Moc --- diff --git a/target/linux/ramips/dts/mt7628an_tplink_tl-mr6400-v5.dts b/target/linux/ramips/dts/mt7628an_tplink_tl-mr6400-v5.dts new file mode 100644 index 0000000000..71e9694dde --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_tplink_tl-mr6400-v5.dts @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7628an_tplink_8m.dtsi" + +/ { + compatible = "tplink,tl-mr6400-v5", "mediatek,mt7628an-soc"; + model = "TP-Link TL-MR6400 v5"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "white:wlan"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + lan { + label = "white:lan"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "white:power"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "white:wan"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + }; + + signal1 { + label = "white:signal1"; + gpios = <&gpio 41 GPIO_ACTIVE_LOW>; + }; + + signal2 { + label = "white:signal2"; + gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + }; + + signal3 { + label = "white:signal3"; + gpios = <&gpio 43 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&state_default { + gpio { + groups = "i2c", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "uart1", "wdt"; + function = "gpio"; + }; +}; + +&esw { + mediatek,portmap = <0x37>; + mediatek,portdisable = <0x30>; +}; + +&wmac { + mtd-mac-address = <&factory 0x1f100>; +}; + +ðernet { + mtd-mac-address = <&factory 0x1f100>; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 30c41420aa..72539f7a14 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -498,6 +498,22 @@ define Device/tplink_tl-mr6400-v4 endef TARGET_DEVICES += tplink_tl-mr6400-v4 +define Device/tplink_tl-mr6400-v5 + $(Device/tplink-v2) + IMAGE_SIZE := 7808k + DEVICE_MODEL := TL-MR6400 + DEVICE_VARIANT := v5 + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0x64000005 + TPLINK_HWREV := 0x5 + TPLINK_HWREVADD := 0x5 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \ + kmod-usb-serial kmod-usb-serial-option kmod-usb-net-qmi-wwan uqmi + IMAGES := sysupgrade.bin tftp-recovery.bin + IMAGE/tftp-recovery.bin := pad-extra 128k | $$(IMAGE/factory.bin) +endef +TARGET_DEVICES += tplink_tl-mr6400-v5 + define Device/tplink_tl-wa801nd-v5 $(Device/tplink-v2) IMAGE_SIZE := 7808k diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 4ed38bf5f2..31bd9e05b1 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -79,6 +79,10 @@ tplink,tl-mr6400-v4) ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x0e" ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x10" ;; +tplink,tl-mr6400-v5) + ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x07" + ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x08" + ;; tplink,tl-wr841n-v13) ucidef_set_led_wlan "wlan2g" "wlan2g" "green:wlan" "phy0tpt" ucidef_set_led_switch "lan1" "lan1" "green:lan1" "switch0" "0x2" diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index a7e978a2e2..f4e3fcacb5 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -116,6 +116,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; + tplink,tl-mr6400-v5) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:wan" "6@eth0" + ;; tplink,tl-wr902ac-v3) ucidef_add_switch "switch0" \ "4:lan" "6@eth0"