From: Milo Kim Date: Thu, 8 Aug 2013 04:56:01 +0000 (+0900) Subject: leds: lp5523: make separate API for loading engine X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=b9e1730b295087f5561477a184878783fd3d96d2;p=openwrt%2Fstaging%2Fblogic.git leds: lp5523: make separate API for loading engine lp5523_load_engine() It is called whenever the operation mode is changed to 'load'. It is used for simple operation mode change. It will be used when engine mode and LED selection is updated in later patch. lp5523_load_engine_and_select_page() Change the operation mode to 'load' and select program page number. This is used for programming a LED pattern at a time. So load_engine() is replaced with new API, load_engine_and_select_page() in lp5523_firmware_loaded(). Signed-off-by: Milo Kim Signed-off-by: Bryan Wu --- diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index 72c10e2d4b02..b50948060a02 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -152,15 +152,21 @@ static void lp5523_load_engine(struct lp55xx_chip *chip) [LP55XX_ENGINE_3] = LP5523_LOAD_ENG3, }; + lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]); + + lp5523_wait_opmode_done(); +} + +static void lp5523_load_engine_and_select_page(struct lp55xx_chip *chip) +{ + enum lp55xx_engine_index idx = chip->engine_idx; u8 page_sel[] = { [LP55XX_ENGINE_1] = LP5523_PAGE_ENG1, [LP55XX_ENGINE_2] = LP5523_PAGE_ENG2, [LP55XX_ENGINE_3] = LP5523_PAGE_ENG3, }; - lp55xx_update_bits(chip, LP5523_REG_OP_MODE, mask[idx], val[idx]); - - lp5523_wait_opmode_done(); + lp5523_load_engine(chip); lp55xx_write(chip, LP5523_REG_PROG_PAGE_SEL, page_sel[idx]); } @@ -290,7 +296,7 @@ static void lp5523_firmware_loaded(struct lp55xx_chip *chip) * 2) write firmware data into program memory */ - lp5523_load_engine(chip); + lp5523_load_engine_and_select_page(chip); lp5523_update_program_memory(chip, fw->data, fw->size); }