From: Tero Kristo Date: Mon, 28 Nov 2011 14:53:19 +0000 (+0200) Subject: regulator: twl: fix twl4030 support for smps regulators X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ba305e31e88ea5c2f598ff9fbc5424711a429e30;p=openwrt%2Fstaging%2Fblogic.git regulator: twl: fix twl4030 support for smps regulators SMPS regulator voltage control differs from the one of the LDO ones. Current TWL code was using LDO regulator ops for controlling the SMPS regulators, which fails. This was fixed fixed by adding separate regulator type which uses correct logic and calculations for the voltage levels. Signed-off-by: Tero Kristo Signed-off-by: Mark Brown Cc: stable@kernel.org --- diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index ee8747f4fa08..11cc308d66e9 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -71,6 +71,7 @@ struct twlreg_info { #define VREG_TYPE 1 #define VREG_REMAP 2 #define VREG_DEDICATED 3 /* LDO control */ +#define VREG_VOLTAGE_SMPS_4030 9 /* TWL6030 register offsets */ #define VREG_TRANS 1 #define VREG_STATE 2 @@ -514,6 +515,32 @@ static struct regulator_ops twl4030ldo_ops = { .get_status = twl4030reg_get_status, }; +static int +twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, + unsigned *selector) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = DIV_ROUND_UP(min_uV - 600000, 12500); + + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030, + vsel); + return 0; +} + +static int twl4030smps_get_voltage(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, + VREG_VOLTAGE_SMPS_4030); + + return vsel * 12500 + 600000; +} + +static struct regulator_ops twl4030smps_ops = { + .set_voltage = twl4030smps_set_voltage, + .get_voltage = twl4030smps_get_voltage, +}; + static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) { struct twlreg_info *info = rdev_get_drvdata(rdev); @@ -856,6 +883,21 @@ static struct regulator_ops twlsmps_ops = { }, \ } +#define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf) \ + { \ + .base = offset, \ + .id = num, \ + .delay = turnon_delay, \ + .remap = remap_conf, \ + .desc = { \ + .name = #label, \ + .id = TWL4030_REG_##label, \ + .ops = &twl4030smps_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + }, \ + } + #define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts) { \ .base = offset, \ .min_mV = min_mVolts, \ @@ -947,8 +989,8 @@ static struct twlreg_info twl_regs[] = { TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08), TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08), TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08), - TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08), - TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08), + TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08), + TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08), TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08), TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08), TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08),