From: INAGAKI Hiroshi Date: Wed, 24 Apr 2024 16:08:41 +0000 (+0900) Subject: ath79: add support for NEC Aterm WG600HP X-Git-Tag: v24.10.0-rc1~1141 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ba723a3f6c1a8d3c39d85cd57eae2daa8c896b15;p=openwrt%2Fopenwrt.git ath79: add support for NEC Aterm WG600HP NEC Aterm WG600HP is a 2.4/5 GHz band 11n (Wi-Fi 4) router, based on AR9344. Specification: - SoC : Atheros AR9344 - RAM : DDR2 128 MiB (2x Hynix H5PS5162GFR-S6C) - Flash : SPI-NOR 8 MiB (Macronix MX25L6406EMI-12G) - WLAN : 2.4/5 GHz 2T2R - 2.4 GHz : Atheros AR9344 (SoC) - 5 GHz : Atheros AR9382 - Ethernet : 5x 10/100/1000 Mbps - switch : Atheros AR8327 - LEDs/Keys (GPIO): 10x/4x - note : all LEDs are controlled by ath9k chip (AR9382) - UART : through-hole on PCB - assignment : 3.3V, GND, NC, TX, RX from tri-angle marking - settings : 9600n8 - USB : 1x USB 2.0 Type-A - hub (internal): NEC uPD720114 - Power : 12 VDC, 1.5 A (Max. 16 W) - Stock OS : NetBSD based Flash instruction using initramfs-factory.bin image (StockFW WebUI): 1. Boot WG600HP with router mode normally 2. Access to the WebUI ("http://aterm.me/" or "http://192.168.0.1/") on the device and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt initramfs-factory.bin image and click update ("更新") button 4. After updating, the device will be rebooted and booted with OpenWrt initramfs image 5. On the initramfs image, upload (or download) uboot.bin and sysupgrade.bin image to the device 6. Replace the bootloader with a uboot.bin image mtd write bootloader 7. Perform sysupgrade with a sysupgrade.bin image sysupgrade 8. Wait ~120 seconds to complete flashing Flash instruction using initramfs-factory.bin image (bootloader CLI): 1. Connect and open serial console 2. Power on WG600HP and interrupt bootloader by ESC key 3. Login to the bootloader CLI with a password "chiron" 4. Start TFTP server by "tftpd" command 5. Upload initramfs-factory.bin via tftp from your computer example (Windows): tftp -i 192.168.0.1 PUT initramfs-factory.bin 6. Boot initramfs image by "boot" command 7. On the initramfs image, back up the stock bootloader and firmware if needed 8. Upload (or download) uboot.bin and sysupgrade.bin image to the device 9. Replace the bootloader with a uboot.bin image 10. Perform sysupgrade with a sysupgrade.bin image 11. Wait ~120 seconds to complete flashing Notes: - All LEDs are connected to the GPIO controller on the ath9k chip (AR9382) and controlled by it. Those LEDs are probed after probing of ath9k chip, so they cannot be handled as status LEDs of OpenWrt while booting. - A reset pin of the internal USB hub is connected to the GPIO controller of the ath9k chip, like LEDs above. That hub will be detected after probing of the ath9k chip. - The stock bootloader requires an unknown filesystem on firmware area in the flash. Booting of OpenWrt from that filesystem cannot be handled, so the bootloader needs to be replaced to mainline U-Boot before OpenWrt installation. MAC Addresses: LAN : A4:12:42:xx:xx:A0 (config, 0x6 (hex)) WAN : A4:12:42:xx:xx:A1 (config, 0xc (hex)) 2.4 GHz: A4:12:42:xx:xx:A2 (config, 0x0 (hex) / art, 0x1002 (hex)) 5 GHz : A4:12:42:xx:xx:A3 (config, 0x12 (hex) / art, 0x5002 (hex)) Signed-off-by: INAGAKI Hiroshi Link: https://github.com/openwrt/openwrt/pull/15432 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/ath79/dts/ar9344_nec_wg600hp.dts b/target/linux/ath79/dts/ar9344_nec_wg600hp.dts new file mode 100644 index 0000000000..e586dce7ca --- /dev/null +++ b/target/linux/ath79/dts/ar9344_nec_wg600hp.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9344_nec_aterm.dtsi" + +/ { + compatible = "nec,wg600hp", "qca,ar9344"; + model = "NEC Aterm WG600HP"; +}; + +&partitions { + partition@40000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x040000 0x7c0000>; + }; +}; diff --git a/target/linux/ath79/image/lzma-loader/src/board.c b/target/linux/ath79/image/lzma-loader/src/board.c index c38dc14558..0d92f3174b 100644 --- a/target/linux/ath79/image/lzma-loader/src/board.c +++ b/target/linux/ath79/image/lzma-loader/src/board.c @@ -213,7 +213,8 @@ static inline void huawei_ap_init(void) static inline void huawei_ap_init(void) {} #endif -#if defined(CONFIG_BOARD_NEC_WR8750N) || \ +#if defined(CONFIG_BOARD_NEC_WG600HP) || \ + defined(CONFIG_BOARD_NEC_WR8750N) || \ defined(CONFIG_BOARD_NEC_WR9500N) #define AR934X_PLL_SWITCH_CLK_CTRL_REG 0x24 diff --git a/target/linux/ath79/image/tiny.mk b/target/linux/ath79/image/tiny.mk index d80ffa9400..53111119d8 100644 --- a/target/linux/ath79/image/tiny.mk +++ b/target/linux/ath79/image/tiny.mk @@ -121,6 +121,16 @@ define Device/engenius_enh202-v1 endef TARGET_DEVICES += engenius_enh202-v1 +define Device/nec_wg600hp + DEVICE_MODEL := Aterm WG600HP + SOC := ar9344 + BLOCKSIZE := 4k + IMAGE_SIZE := 7936k + NEC_FW_TYPE := H044 + $(Device/nec-netbsd-aterm) +endef +TARGET_DEVICES += nec_wg600hp + define Device/nec_wr8750n SOC := ar9344 DEVICE_MODEL := Aterm WR8750N diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network index e11c37453e..a204e820ca 100644 --- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network +++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network @@ -69,6 +69,7 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "4:lan:1" ;; + nec,wg600hp|\ nec,wr8750n|\ nec,wr9500n|\ tplink,tl-wr941n-v7-cn) @@ -154,6 +155,7 @@ ath79_setup_macs() ubnt,picostation-m) label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) ;; + nec,wg600hp|\ nec,wr8750n|\ nec,wr9500n) wan_mac=$(mtd_get_mac_binary config 0xc) diff --git a/target/linux/ath79/tiny/base-files/lib/upgrade/platform.sh b/target/linux/ath79/tiny/base-files/lib/upgrade/platform.sh index 19ddd29a1d..8fc0efcfbd 100644 --- a/target/linux/ath79/tiny/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/tiny/base-files/lib/upgrade/platform.sh @@ -12,6 +12,7 @@ platform_check_image() { local board=$(board_name) case "$board" in + nec,wg600hp|\ nec,wr8750n|\ nec,wr9500n) local uboot_mtd=$(find_mtd_part "bootloader")