From: Johannes Berg <johannes@sipsolutions.net>
Date: Thu, 16 Apr 2009 11:27:42 +0000 (+0200)
Subject: mac80211: enable PS by default
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=bbbdff9e00449928f228867076a07bdfecd3dca8;p=openwrt%2Fstaging%2Fblogic.git

mac80211: enable PS by default

Enable PS by default (depending on Kconfig) -- rely on drivers
to control the level using pm_qos. Due to the previous patch
we turn off PS when necessary due to latency requirements.

This has a Kconfig symbol so people can, if they really want,
configure the default in their kernels. We may want to keep it
at "default y" only in wireless-testing for a while.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index ecc3faf9f11a..9cbf545e95a2 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -11,6 +11,22 @@ config MAC80211
 	  This option enables the hardware independent IEEE 802.11
 	  networking stack.
 
+config MAC80211_DEFAULT_PS
+	bool "enable powersave by default"
+	depends on MAC80211
+	default y
+	help
+	  This option enables powersave mode by default.
+
+	  If this causes your applications to misbehave you should fix your
+	  applications instead -- they need to register their network
+	  latency requirement, see Documentation/power/pm_qos_interface.txt.
+
+config MAC80211_DEFAULT_PS_VALUE
+	int
+	default 1 if MAC80211_DEFAULT_PS
+	default 0
+
 menu "Rate control algorithm selection"
 	depends on MAC80211 != n
 
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 7a8d4c494246..a16c9d724be1 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2192,6 +2192,7 @@ static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd;
+	u32 hw_flags;
 
 	ifmgd = &sdata->u.mgd;
 	INIT_WORK(&ifmgd->work, ieee80211_sta_work);
@@ -2211,6 +2212,13 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
 		IEEE80211_STA_AUTO_CHANNEL_SEL;
 	if (sdata->local->hw.queues >= 4)
 		ifmgd->flags |= IEEE80211_STA_WMM_ENABLED;
+
+	hw_flags = sdata->local->hw.flags;
+
+	if (hw_flags & IEEE80211_HW_SUPPORTS_PS) {
+		ifmgd->powersave = CONFIG_MAC80211_DEFAULT_PS_VALUE;
+		sdata->local->hw.conf.dynamic_ps_timeout = 500;
+	}
 }
 
 /* configuration hooks */