From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Mon, 4 Dec 2017 15:09:00 +0000 (+0100)
Subject: arch/sh: add sh7786_mm_sel() function
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=bc05aa6e13a717e1abff6f863f7ba82b14556df4;p=openwrt%2Fstaging%2Fblogic.git

arch/sh: add sh7786_mm_sel() function

The SH7786 has different physical memory layout configurations,
configurable through the MMSELR register. The configuration is
typically defined by the bootloader, so Linux generally doesn't care.

Except that depending on the configuration, some PCI MEM areas may or
may not be available. This commit adds a helper function that allows
to retrieve the current physical memory layout configuration. It will
be used in a following patch to exclude unusable PCI MEM areas during
the PCI initialization.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
---

diff --git a/arch/sh/include/cpu-sh4/cpu/sh7786.h b/arch/sh/include/cpu-sh4/cpu/sh7786.h
index 0df09e638f09..96b8cb1f754a 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7786.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7786.h
@@ -14,6 +14,8 @@
 #ifndef __CPU_SH7786_H__
 #define __CPU_SH7786_H__
 
+#include <linux/io.h>
+
 enum {
 	/* PA */
 	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
@@ -131,4 +133,9 @@ enum {
 	GPIO_FN_IRL7, GPIO_FN_IRL6, GPIO_FN_IRL5, GPIO_FN_IRL4,
 };
 
+static inline u32 sh7786_mm_sel(void)
+{
+	return __raw_readl(0xFC400020) & 0x7;
+}
+
 #endif /* __CPU_SH7786_H__ */