From: Sungbo Eo <mans0n@gorani.run>
Date: Fri, 7 Feb 2020 11:26:05 +0000 (+0900)
Subject: ramips: append tail to WF2881 initramfs image
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=be3e98ce26da5e737744427e1d59dd1c0508edef;p=openwrt%2Fstaging%2Fthess.git

ramips: append tail to WF2881 initramfs image

Stock firmware has a vendor-defined tail at the end of uImage for image
validation. This patch enables OpenWrt installation from stock firmware
without having to access the UART console.

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
---

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 878d70c98e..4c27cdbd31 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -81,6 +81,12 @@ define Build/iodata-mstc-header
   )
 endef
 
+define Build/netis-tail
+	echo -n $(1) >> $@
+	echo -n $(UIMAGE_NAME)-yun | $(STAGING_DIR_HOST)/bin/mkhash md5 | \
+		sed 's/../\\\\x&/g' | xargs echo -ne >> $@
+endef
+
 define Build/ubnt-erx-factory-image
 	if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \
 		echo '21001:6' > $(1).compat; \
@@ -631,6 +637,8 @@ define Device/netis_wf2881
   KERNEL_SIZE := 4096k
   IMAGE_SIZE := 129280k
   UBINIZE_OPTS := -E 5
+  UIMAGE_NAME := WF2881_0.0.00
+  KERNEL_INITRAMFS := $(KERNEL_DTB) | netis-tail WF2881 | uImage lzma
   IMAGES += factory.bin
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \