From: John Crispin Date: Thu, 10 Mar 2016 19:12:04 +0000 (+0000) Subject: ramips: Add support for GL-MT300N X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=be53e5a154931109dd76a8015583123201c4b602;p=openwrt%2Fstaging%2Fwigyori.git ramips: Add support for GL-MT300N This patch adds support for GL-MT300N. GL-MT300N is powered by MT7620N with 16MB flash, 64MB RAM, 2 LANs, USB, UART, GPIO and PoE support. SVN-Revision: 48993 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 536a363d92..132c7cecbb 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -137,7 +137,8 @@ fonera20n) set_usb_led "$board:orange:usb" set_wifi_led "$board:orange:wifi" ;; -gl-mt300a) +gl-mt300a|\ +gl-mt300n) set_wifi_led "$board:wlan" ;; hc5661) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 74599adf5d..40c24a9769 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -114,6 +114,7 @@ ramips_setup_interfaces() f5d8235-v1|\ f5d8235-v2|\ gl-mt300a|\ + gl-mt300n|\ hg255d|\ mzk-wdpr|\ jhr-n805r|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index ba27c1436d..fcc4b9fb08 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -178,6 +178,9 @@ ramips_board_detect() { *"GL-MT300A") name="gl-mt300a" ;; + *"GL-MT300N") + name="gl-mt300n" + ;; *"HC5661") name="hc5661" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 876416ea81..87278317bb 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -57,6 +57,7 @@ platform_check_image() { fonera20n|\ freestation5|\ gl-mt300a|\ + gl-mt300n|\ hc5*61|\ hg255d|\ hlk-rm04|\ diff --git a/target/linux/ramips/dts/GL-MT300N.dts b/target/linux/ramips/dts/GL-MT300N.dts new file mode 100644 index 0000000000..82db37eecd --- /dev/null +++ b/target/linux/ramips/dts/GL-MT300N.dts @@ -0,0 +1,153 @@ +/dts-v1/; + +/include/ "mt7620n.dtsi" + +/ { + compatible = "GL-MT300N", "ralink,mt7620n-soc"; + model = "GL-MT300N"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + + partition@ff0000 { + label = "art"; + reg = <0xff0000 0x10000>; + }; + }; + }; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4000>; + ralink,port-map = "wllll"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pcie@10140000 { + status = "okay"; + + pcie-bridge { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wled","ephy","i2c"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wan { + label = "gl-mt300n:wan"; + gpios = <&gpio2 0 1>; + }; + + lan { + label = "gl-mt300n:lan"; + gpios = <&gpio2 1 1>; + }; + + wlan { + label = "gl-mt300n:wlan"; + gpios = <&gpio3 0 1>; + }; + + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + + BTN_0 { + label = "BTN_0"; + gpios = <&gpio2 2 1>; + linux,code = <0x100>; + }; + + BTN_1 { + label = "BTN_1"; + gpios = <&gpio2 3 1>; + linux,code = <0x101>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index fb7407b5ba..4a2d60767f 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -994,6 +994,7 @@ Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WR Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020) Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-mini,MIWIFI-MINI) Image/Build/Profile/GL-MT300A=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300a,GL-MT300A) +Image/Build/Profile/GL-MT300N=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300n,GL-MT300N) Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1) Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) @@ -1038,6 +1039,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WT3020,$(1)) $(call Image/Build/Profile/MIWIFI-MINI,$(1)) $(call Image/Build/Profile/GL-MT300A,$(1)) + $(call Image/Build/Profile/GL-MT300N,$(1)) $(call Image/Build/Profile/ZTE-Q7,$(1)) $(call Image/Build/Profile/YOUKU-YK1,$(1)) $(call Image/Build/Profile/ZBT-WA05,$(1)) diff --git a/target/linux/ramips/mt7620/profiles/gli.mk b/target/linux/ramips/mt7620/profiles/gli.mk index 53e2e9d578..6473ff07e5 100644 --- a/target/linux/ramips/mt7620/profiles/gli.mk +++ b/target/linux/ramips/mt7620/profiles/gli.mk @@ -14,3 +14,14 @@ define Profile/GL-MT300A/Description Support for gl-mt300a Router endef $(eval $(call Profile,GL-MT300A)) + +define Profile/GL-MT300N + NAME:=GL-MT300N + PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci kmod-mt76 +endef + +define Profile/GL-MT300N/Description + Support for gl-mt300n Router +endef +$(eval $(call Profile,GL-MT300N)) +