From: John Crispin Date: Thu, 18 Jun 2015 18:21:33 +0000 (+0000) Subject: ar71xx: add kernel support for EnGenius EPG5000. X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=be755a99d6d628c65e9785fef41d66d714c1fd74;p=openwrt%2Fstaging%2Fnbd.git ar71xx: add kernel support for EnGenius EPG5000. Signed-off-by: Christian Beier SVN-Revision: 46047 --- diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18 index 05c98ebf69..17f33bd53d 100644 --- a/target/linux/ar71xx/config-3.18 +++ b/target/linux/ar71xx/config-3.18 @@ -58,6 +58,7 @@ CONFIG_ATH79_MACH_EAP300V2=y CONFIG_ATH79_MACH_EAP7660D=y CONFIG_ATH79_MACH_EL_M150=y CONFIG_ATH79_MACH_EL_MINI=y +CONFIG_ATH79_MACH_EPG5000=y CONFIG_ATH79_MACH_ESR1750=y CONFIG_ATH79_MACH_ESR900=y CONFIG_ATH79_MACH_EW_DORIN=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c new file mode 100644 index 0000000000..b049f5d692 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c @@ -0,0 +1,178 @@ +/* + * EnGenius EPG5000 board support + * + * Copyright (c) 2014 Jon Suphammer + * Copyright (c) 2015 Christian Beier + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include + +#include "common.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "nvram.h" + +#define EPG5000_GPIO_LED_WLAN_5G 23 +#define EPG5000_GPIO_LED_WLAN_2G 13 +#define EPG5000_GPIO_LED_POWER_AMBER 2 +#define EPG5000_GPIO_LED_WPS_AMBER 22 +#define EPG5000_GPIO_LED_WPS_BLUE 19 + +#define EPG5000_GPIO_BTN_WPS 16 +#define EPG5000_GPIO_BTN_RESET 17 + +#define EPG5000_KEYS_POLL_INTERVAL 20 /* msecs */ +#define EPG5000_KEYS_DEBOUNCE_INTERVAL (3 * EPG5000_KEYS_POLL_INTERVAL) + +#define EPG5000_CALDATA_ADDR 0x1fff0000 +#define EPG5000_WMAC_CALDATA_OFFSET 0x1000 +#define EPG5000_PCIE_CALDATA_OFFSET 0x5000 + +#define EPG5000_NVRAM_ADDR 0x1f030000 +#define EPG5000_NVRAM_SIZE 0x10000 + +static struct gpio_led epg5000_leds_gpio[] __initdata = { + { + .name = "epg5000:amber:power", + .gpio = EPG5000_GPIO_LED_POWER_AMBER, + .active_low = 1, + }, + { + .name = "epg5000:blue:wps", + .gpio = EPG5000_GPIO_LED_WPS_BLUE, + .active_low = 1, + }, + { + .name = "epg5000:amber:wps", + .gpio = EPG5000_GPIO_LED_WPS_AMBER, + .active_low = 1, + }, + { + .name = "epg5000:blue:wlan-2g", + .gpio = EPG5000_GPIO_LED_WLAN_2G, + .active_low = 1, + }, + { + .name = "epg5000:blue:wlan-5g", + .gpio = EPG5000_GPIO_LED_WLAN_5G, + .active_low = 1, + } +}; + +static struct gpio_keys_button epg5000_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = EPG5000_KEYS_DEBOUNCE_INTERVAL, + .gpio = EPG5000_GPIO_BTN_WPS, + .active_low = 1, + }, + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = EPG5000_KEYS_DEBOUNCE_INTERVAL, + .gpio = EPG5000_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg epg5000_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL2, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, + .mac06_exchange_en = true, +}; + +static struct ar8327_platform_data epg5000_ar8327_data = { + .pad0_cfg = &epg5000_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info epg5000_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &epg5000_ar8327_data, + }, +}; + +static int epg5000_get_mac(const char *name, char *mac) +{ + u8 *nvram = (u8 *) KSEG1ADDR(EPG5000_NVRAM_ADDR); + int err; + + err = ath79_nvram_parse_mac_addr(nvram, EPG5000_NVRAM_SIZE, + name, mac); + if (err) { + pr_err("no MAC address found for %s\n", name); + return false; + } + + return true; +} + +static void __init epg5000_setup(void) +{ + u8 *caldata = (u8 *) KSEG1ADDR(EPG5000_CALDATA_ADDR); + u8 mac1[ETH_ALEN]; + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(epg5000_leds_gpio), + epg5000_leds_gpio); + ath79_register_gpio_keys_polled(-1, EPG5000_KEYS_POLL_INTERVAL, + ARRAY_SIZE(epg5000_gpio_keys), + epg5000_gpio_keys); + + ath79_register_usb(); + + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); + + ath79_register_mdio(0, 0x0); + + mdiobus_register_board_info(epg5000_mdio0_info, + ARRAY_SIZE(epg5000_mdio0_info)); + + /* GMAC0 is connected to an QCA8327N switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + + if (epg5000_get_mac("ethaddr=", mac1)) + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + + ath79_eth0_pll_data.pll_1000 = 0xa6000000; + ath79_register_eth(0); + + ath79_register_wmac(caldata + EPG5000_WMAC_CALDATA_OFFSET, mac1); + + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_EPG5000, "EPG5000", + "EnGenius EPG5000", + epg5000_setup); diff --git a/target/linux/ar71xx/patches-3.18/718-MIPS-ath79-add-EPG5000-support.patch b/target/linux/ar71xx/patches-3.18/718-MIPS-ath79-add-EPG5000-support.patch new file mode 100644 index 0000000000..579e024dfb --- /dev/null +++ b/target/linux/ar71xx/patches-3.18/718-MIPS-ath79-add-EPG5000-support.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -196,6 +196,16 @@ config ATH79_MACH_F9K1115V2 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_EPG5000 ++ bool "EnGenius EPG5000 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_ESR1750 + bool "EnGenius ESR1750 board support" + select SOC_QCA955X +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -69,6 +69,7 @@ obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o + obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o + obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o + obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o ++obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o + obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o + obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o + obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -59,6 +59,7 @@ enum ath79_mach_type { + ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ + ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ + ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ ++ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ + ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */ + ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */ + ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */