From: David Bauer Date: Sun, 10 Jun 2018 22:37:38 +0000 (+0200) Subject: ramips: use phytpt trigger for mt76 wireless X-Git-Tag: v18.06.0-rc1~69 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=be799e8c2a1b56c39743b90242d36a1396bb79f7;p=openwrt%2Fstaging%2Fxback.git ramips: use phytpt trigger for mt76 wireless With this change, the LED trigger is independent from the (wireless) netdev name. The (wireless) netdev name can be easiliy changed in OpenWrt and would require an update of the netdev trigger settings each time it is done. This change is (for now) applied only to MT7628 devices from TP-Link, as we only had the possibility to test this change against two of those devices, namely a TL-WR841 v13 and a Archer C50 v3. Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index ae5ac77b5e..73e3f22418 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -384,12 +384,12 @@ tiny-ac) set_usb_led "$boardname:green:usb" ;; tl-wr840n-v4) - set_wifi_led "$boardname:green:wlan" + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" ;; tl-wr841n-v13) - set_wifi_led "$boardname:green:wlan" + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2" ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4" ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8" @@ -415,13 +415,13 @@ tplink,c50-v3) ;; tplink,tl-mr3420-v5) set_usb_led "$boardname:green:usb" - set_wifi_led "$boardname:green:wlan" + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" ;; tplink,tl-wr902ac-v3) set_usb_led "$boardname:green:usb" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan" "wlan0" + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10" ;; u25awf-h1)