From: Sebastian Schaper Date: Wed, 25 Aug 2021 20:00:08 +0000 (+0200) Subject: ath79: move cal-data extraction to dts for DAP-2695 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=be88f416db0a7ba7064c1b8bcb9556452d0729d3;p=openwrt%2Fstaging%2Fwigyori.git ath79: move cal-data extraction to dts for DAP-2695 This device can be merged with the existing dtsi, which declares the location of ath9k cal-data via devicetree, correcting the 2.4G mac address in `10_fix_wifi_mac` rather than `10-ath9k-eeprom`. To make these changes more visible, apply before merging with dtsi. Signed-off-by: Sebastian Schaper --- diff --git a/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts b/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts index 53b1e03da6..0317f1eabb 100644 --- a/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts +++ b/target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts @@ -160,5 +160,5 @@ &wmac { status = "okay"; - qca,no-eeprom; + mtd-cal-data = <&art 0x1000>; }; diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 9a3054e276..da78e74dcb 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -18,10 +18,6 @@ case "$FIRMWARE" in avm,fritzdvbc) caldata_extract_reverse "urlader" 0x1541 0x440 ;; - dlink,dap-2695-a1) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii bdcfg "wlanmac") - ;; dlink,dir-505|\ dlink,dir-825-c1|\ dlink,dir-835-a1) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index ac8b59c538..a4f82c54e2 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -28,6 +28,7 @@ case "$board" in ;; dlink,dap-2660-a1|\ dlink,dap-2680-a1|\ + dlink,dap-2695-a1|\ dlink,dap-3662-a1) [ "$PHYNBR" -eq 1 ] && \ mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress