From: Henryk Heisig Date: Mon, 15 Jan 2018 05:44:14 +0000 (+0100) Subject: ar71xx: add support for TP-Link Archer C60 v2 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c0742307a18178ee7d2cee1fc6b0e199ccb1e1fa;p=openwrt%2Fstaging%2Faparcar.git ar71xx: add support for TP-Link Archer C60 v2 TP-Link Archer C60 v2 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (web): Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Flash instruction (recovery): 1. Set PC to fixed IP address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery Flash instruction (under U-Boot, using UART): tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize reset Signed-off-by: Henryk Heisig --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 58e2c9743c..cf24e465a3 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -128,7 +128,8 @@ archer-c7) ;; archer-c58-v1|\ archer-c59-v1|\ -archer-c60-v1) +archer-c60-v1|\ +archer-c60-v2) ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0" ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index ffdc90fbfc..dfe97e8133 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -248,7 +248,8 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2" ;; - archer-c60-v1) + archer-c60-v1|\ + archer-c60-v2) ucidef_set_interfaces_lan_wan "eth1.1" "eth0" ucidef_add_switch "switch0" \ "0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index bd0926c213..797c30f8a5 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -64,6 +64,7 @@ get_status_led() { archer-c58-v1|\ archer-c59-v1|\ archer-c60-v1|\ + archer-c60-v2|\ archer-c7-v4|\ fritz300e|\ gl-usb150|\ diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index c93ce2a614..5d01701aa8 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -163,6 +163,7 @@ case "$FIRMWARE" in archer-c58-v1|\ archer-c59-v1|\ archer-c60-v1|\ + archer-c60-v2|\ cf-e355ac-v2|\ cf-e375ac) ath10kcal_extract "art" 20480 12064 diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 0530d595a7..a763938ecd 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -14,7 +14,8 @@ board=$(board_name) case "$board" in archer-c58-v1|\ archer-c59-v1|\ - archer-c60-v1) + archer-c60-v1|\ + archer-c60-v2) echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress ;; *) diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index b711150ee9..7249cb6151 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -485,6 +485,9 @@ ar71xx_board_detect() { *"Archer C60 v1") name="archer-c60-v1" ;; + *"Archer C60 v2") + name="archer-c60-v2" + ;; *"Archer C7") name="archer-c7" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index fe927ea550..633a7e8e56 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -202,6 +202,7 @@ platform_check_image() { archer-c58-v1|\ archer-c59-v1|\ archer-c60-v1|\ + archer-c60-v2|\ archer-c7-v4|\ bullet-m|\ c-55|\ diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index e78b16cd19..5cea1b7bde 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -53,6 +53,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set # CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set # CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set +# CONFIG_ATH79_MACH_ARCHER_C60_V2 is not set # CONFIG_ATH79_MACH_ARCHER_C7 is not set # CONFIG_ATH79_MACH_ARDUINO_YUN is not set # CONFIG_ATH79_MACH_AW_NR580 is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 965d876e08..4a032f6021 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1529,6 +1529,16 @@ config ATH79_MACH_ARCHER_C60_V1 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_ARCHER_C60_V2 + bool "TP-LINK Archer C60 v2 support" + select SOC_QCA956X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_ARCHER_C7 bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support" select SOC_QCA955X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index d549dd39b7..e606e2c3df 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o +obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V2) += mach-archer-c60-v1.o obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c index 4d83fa737b..88f4f081a3 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c @@ -1,7 +1,7 @@ /* * TP-Link Archer C60 v1 board support * - * Copyright (C) 2016 Henryk Heisig + * Copyright (C) 2017 Henryk Heisig * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -83,6 +83,44 @@ static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = { }, }; +static struct gpio_led archer_c60_v2_leds_gpio[] __initdata = { + { + .name = "archer-c60-v2:green:power", + .gpio = ARCHER_C60_V1_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "archer-c60-v2:green:wlan2g", + .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2, + .active_low = 1, + }, + { + .name = "archer-c60-v2:green:wlan5g", + .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5, + .active_low = 1, + }, + { + .name = "archer-c60-v2:green:lan", + .gpio = ARCHER_C60_V1_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "archer-c60-v2:green:wan", + .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, + { + .name = "archer-c60-v2:amber:wan", + .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, + { + .name = "archer-c60-v2:green:wps", + .gpio = ARCHER_C60_V1_GPIO_LED_WPS, + .active_low = 1, + }, +}; + static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = { { .desc = "Reset button", @@ -143,3 +181,45 @@ static void __init archer_c60_v1_setup(void) MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1", "TP-LINK Archer C60 v1", archer_c60_v1_setup); + +static void __init archer_c60_v2_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fb08); + u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v2_leds_gpio), + archer_c60_v2_leds_gpio); + + ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(archer_c60_v1_gpio_keys), + archer_c60_v1_gpio_keys); + + ath79_register_mdio(0, 0x0); + ath79_register_mdio(1, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + + /* WAN port */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(4); + ath79_register_eth(0); + + /* LAN ports */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_switch_data.phy_poll_mask |= BIT(4); + ath79_switch_data.phy4_mii_en = 1; + ath79_register_eth(1); + + ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac); + ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL); +} + +MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V2, "ARCHER-C60-V2", + "TP-LINK Archer C60 v2", archer_c60_v2_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 6007b512aa..b61ed7abcd 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -48,6 +48,7 @@ enum ath79_mach_type { ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */ ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */ ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */ + ATH79_MACH_ARCHER_C60_V2, /* TP-LINK Archer C60 V2 board */ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */ ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */ ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index 088824d31d..6475d2281a 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -31,6 +31,7 @@ CONFIG_ATH79_MACH_ARCHER_C25_V1=y CONFIG_ATH79_MACH_ARCHER_C58_V1=y CONFIG_ATH79_MACH_ARCHER_C59_V1=y CONFIG_ATH79_MACH_ARCHER_C60_V1=y +CONFIG_ATH79_MACH_ARCHER_C60_V2=y CONFIG_ATH79_MACH_ARCHER_C7=y CONFIG_ATH79_MACH_ARDUINO_YUN=y CONFIG_ATH79_MACH_AW_NR580=y diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk index 48eed6b15b..9054f1c7da 100644 --- a/target/linux/ar71xx/image/generic-tp-link.mk +++ b/target/linux/ar71xx/image/generic-tp-link.mk @@ -62,6 +62,18 @@ define Device/archer-c60-v1 endef TARGET_DEVICES += archer-c60-v1 +define Device/archer-c60-v2 + $(Device/archer-c60-v1) + DEVICE_TITLE := TP-LINK Archer C60 v2 + BOARDNAME := ARCHER-C60-V2 + TPLINK_BOARD_ID := ARCHER-C60-V2 + DEVICE_PROFILE := ARCHERC60V2 + IMAGE_SIZE := 7808k + MTDPARTS := spi0.0:192k(u-boot)ro,7808k(firmware),128k(tplink)ro,64k(art)ro + SUPPORTED_DEVICES := archer-c60-v2 +endef +TARGET_DEVICES += archer-c60-v2 + define Device/archer-c5-v1 $(Device/tplink-16mlzma) DEVICE_TITLE := TP-LINK Archer C5 v1 diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index eb99241136..2e83b71c44 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -451,6 +451,43 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system", }, + /** Firmware layout for the C60v2 */ + { + .id = "ARCHER-C60-V2", + .vendor = "", + .support_list = + "SupportList:\r\n" + "{product_name:Archer C60,product_ver:2.0.0,special_id:42520000}\r\n" + "{product_name:Archer C60,product_ver:2.0.0,special_id:45550000}\r\n" + "{product_name:Archer C60,product_ver:2.0.0,special_id:55530000}\r\n", + .support_trail = '\x00', + .soft_ver = "soft_ver:2.0.0\n", + + .partitions = { + {"factory-boot", 0x00000, 0x1fb00}, + {"default-mac", 0x1fb00, 0x00200}, + {"pin", 0x1fd00, 0x00100}, + {"product-info", 0x1fe00, 0x00100}, + {"device-id", 0x1ff00, 0x00100}, + {"fs-uboot", 0x20000, 0x10000}, + {"os-image", 0x30000, 0x180000}, + {"file-system", 0x1b0000, 0x620000}, + {"soft-version", 0x7d9500, 0x00100}, + {"support-list", 0x7d9600, 0x00100}, + {"extra-para", 0x7d9700, 0x00100}, + {"profile", 0x7d9800, 0x03000}, + {"default-config", 0x7dc800, 0x03000}, + {"partition-table", 0x7df800, 0x00800}, + {"user-config", 0x7e0000, 0x0c000}, + {"certificate", 0x7ec000, 0x04000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system", + }, + /** Firmware layout for the C5 */ { .id = "ARCHER-C5-V2", @@ -1343,6 +1380,7 @@ static void build_image(const char *output, /* Some devices need the extra-para partition to accept the firmware */ if (strcasecmp(info->id, "ARCHER-C25-V1") == 0 || + strcasecmp(info->id, "ARCHER-C60-V2") == 0 || strcasecmp(info->id, "TLWR1043NV5") == 0) { const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00}; parts[5] = put_data("extra-para", mdat, 11);