From: Daniel Lezcano Date: Thu, 19 Oct 2017 17:05:43 +0000 (+0200) Subject: thermal/drivers/hisi: Fix missing interrupt enablement X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c176b10b025acee4dc8f2ab1cd64eb73b5ccef53;p=openwrt%2Fstaging%2Fblogic.git thermal/drivers/hisi: Fix missing interrupt enablement The interrupt for the temperature threshold is not enabled at the end of the probe function, enable it after the setup is complete. On the other side, the irq_enabled is not correctly set as we are checking if the interrupt is masked where 'yes' means irq_enabled=false. irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED, &data->irq_enabled); As we are always enabling the interrupt, it is pointless to check if the interrupt is masked or not, just set irq_enabled to 'true'. Signed-off-by: Daniel Lezcano Reviewed-by: Leo Yan Tested-by: Leo Yan Signed-off-by: Eduardo Valentin --- diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index bd3572c41585..8381696241d6 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -345,8 +345,7 @@ static int hisi_thermal_probe(struct platform_device *pdev) } hisi_thermal_enable_bind_irq_sensor(data); - irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED, - &data->irq_enabled); + data->irq_enabled = true; for (i = 0; i < HISI_MAX_SENSORS; ++i) { ret = hisi_thermal_register_sensor(pdev, data, @@ -358,6 +357,8 @@ static int hisi_thermal_probe(struct platform_device *pdev) hisi_thermal_toggle_sensor(&data->sensors[i], true); } + enable_irq(data->irq); + return 0; }