From: Chukun Pan Date: Sat, 3 Jun 2023 15:20:13 +0000 (+0800) Subject: ipq807x: add support for ZTE MF269 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c22aa0be3e2df4d46010fa57a1004c17c1288781;p=openwrt%2Fstaging%2Fstintel.git ipq807x: add support for ZTE MF269 Hardware specifications: SoC: Qualcomm IPQ8071A RAM: 512MB of DDR3 Flash1: Eon EN25S64 8MB Flash2: MX30UF2G18AC 256MB Ethernet: 2x 2.5G RJ45 port Phone: 1x RJ11 port (SPI) USB: 1x Type-C 2.0 port WiFi1: QCN5024 2.4GHz WiFi2: QCN5054 5GHz Button: Reset, WPS Flash instructions: 1. Connect the router via serial port (115200 8N1 1.8V) 2. Download the initramfs image, rename it to initramfs.bin, and host it with the tftp server. 3. Interrupt U-Boot and run these commands: tftpboot initramfs.bin bootm 4. After openwrt boots up, use scp or luci web to upload sysupgrade.bin to upgrade. Signed-off-by: Chukun Pan Reviewed-by: Robert Marko --- diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index cbd61c5be8..ef1a456403 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -46,6 +46,7 @@ ALLWIFIBOARDS:= \ xiaomi_ax9000 \ yyets_le1 \ yuncore_ax880 \ + zte_mf269 \ zte_mf289f \ zte_mf287 \ zte_mf287plus \ @@ -155,6 +156,7 @@ $(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600)) $(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000)) $(eval $(call generate-ipq-wifi-package,yyets_le1,YYeTs LE1)) $(eval $(call generate-ipq-wifi-package,yuncore_ax880,Yuncore AX880)) +$(eval $(call generate-ipq-wifi-package,zte_mf269,ZTE MF269)) $(eval $(call generate-ipq-wifi-package,zte_mf289f,ZTE MF289F)) $(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287)) $(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus)) diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts new file mode 100644 index 0000000000..8b055800e1 --- /dev/null +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-mf269.dts @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "ipq8074-512m.dtsi" +#include "ipq8074-ac-cpu.dtsi" +#include "ipq8074-ess.dtsi" +#include +#include + +/ { + model = "ZTE MF269"; + compatible = "zte,mf269", "qcom,ipq8074"; + + aliases { + serial0 = &blsp1_uart5; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + label-mac-device = &dp6_syn; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " root=/dev/ubiblock0_0"; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wps { + label = "wps"; + linux,code = ; + gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "reset"; + linux,code = ; + gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "white:power"; + gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + button_pins: button_pins { + mux { + pins = "gpio37", "gpio46"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + i2c_pins: i2c-pins { + pins = "gpio21", "gpio22"; + function = "blsp4_i2c1"; + drive-strength = <8>; + bias-disable; + }; + + mdio_pins: mdio-pins { + mdc { + pins = "gpio68"; + function = "mdc"; + drive-strength = <8>; + bias-pull-up; + }; + + mdio { + pins = "gpio69"; + function = "mdio"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + usb_pwr_pins: usb_pwr_pins { + mux { + pins = "gpio29"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + cs-select = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:sbl1"; + reg = <0x0 0x50000>; + read-only; + }; + + partition@50000 { + label = "0:mibib"; + reg = <0x50000 0x10000>; + read-only; + }; + + partition@60000 { + label = "0:bootconfig"; + reg = <0x60000 0x20000>; + read-only; + }; + + partition@80000 { + label = "0:bootconfig1"; + reg = <0x80000 0x20000>; + read-only; + }; + + partition@a0000 { + label = "0:qsee"; + reg = <0xa0000 0x180000>; + read-only; + }; + + partition@220000 { + label = "0:qsee_1"; + reg = <0x220000 0x180000>; + read-only; + }; + + partition@3a0000 { + label = "0:devcfg"; + reg = <0x3a0000 0x10000>; + read-only; + }; + + partition@3b0000 { + label = "0:devcfg_1"; + reg = <0x3b0000 0x10000>; + read-only; + }; + + partition@3c0000 { + label = "0:apdp"; + reg = <0x3c0000 0x10000>; + read-only; + }; + + partition@3d0000 { + label = "0:apdp_1"; + reg = <0x3d0000 0x10000>; + read-only; + }; + + partition@3e0000 { + label = "0:rpm"; + reg = <0x3e0000 0x40000>; + read-only; + }; + + partition@420000 { + label = "0:rpm_1"; + reg = <0x420000 0x40000>; + read-only; + }; + + partition@460000 { + label = "0:cdt"; + reg = <0x460000 0x10000>; + read-only; + }; + + partition@470000 { + label = "0:cdt_1"; + reg = <0x470000 0x10000>; + read-only; + }; + + partition@480000 { + label = "0:appsblenv"; + reg = <0x480000 0x10000>; + }; + + partition@490000 { + label = "0:appsbl"; + reg = <0x490000 0xc0000>; + read-only; + }; + + partition@550000 { + label = "0:appsbl_1"; + reg = <0x550000 0xc0000>; + read-only; + }; + + partition@610000 { + label = "0:art"; + reg = <0x610000 0x40000>; + read-only; + }; + + partition@650000 { + label = "0:ethphyfw"; + reg = <0x650000 0x80000>; + read-only; + }; + }; + }; +}; + +&blsp1_i2c5 { + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* No driver exists */ + aw9106: gpio-expander@5b { + reg = <0x5b>; + reset-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + }; +}; + +&blsp1_uart5 { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + /* + * Bootloader will find the NAND DT node by the compatible and + * then "fixup" it by adding the partitions from the SMEM table + * using the legacy bindings thus making it impossible for us + * to change the partition table or utilize NVMEM for calibration. + * So add a dummy partitions node that bootloader will populate + * and set it as disabled so the kernel ignores it instead of + * printing warnings due to the broken way bootloader adds the + * partitions. + */ + partitions { + status = "disabled"; + }; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "fota-flag"; + reg = <0x0000000 0x00a0000>; + read-only; + }; + + partition@a0000 { + label = "mac"; + reg = <0x00a0000 0x0080000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_mac_0: macaddr@0 { + compatible = "mac-base"; + reg = <0x0 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@120000 { + label = "cfg-param"; + reg = <0x0120000 0x1400000>; + read-only; + }; + + partition@1520000 { + label = "log"; + reg = <0x1520000 0x0600000>; + read-only; + }; + + partition@1b20000 { + label = "oops"; + reg = <0x1b20000 0x00a0000>; + read-only; + }; + + partition@1bc0000 { + label = "web"; + reg = <0x1bc0000 0x0800000>; + read-only; + }; + + partition@23c0000 { + label = "ubi_kernel"; + reg = <0x23c0000 0x3400000>; + }; + + partition@57c0000 { + label = "0:wififw"; + reg = <0x57c0000 0x0800000>; + read-only; + }; + + /* rootfs partition is the result of squashing + * consecutive stock partitions: + * - openwrt_data (25 MiB) + * - data (30 MiB) + * - fota (99 MiB) + */ + partition@5fc0000 { + label = "rootfs"; + reg = <0x5fc0000 0x9a00000>; + }; + }; + }; +}; + +&qusb_phy_0 { + status = "okay"; +}; + +&ssphy_0 { + status = "okay"; +}; + +&usb_0 { + pinctrl-0 = <&usb_pwr_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + qca8081_24: ethernet-phy@24 { + compatible = "ethernet-phy-id004d.d101"; + reg = <24>; + reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; + }; + + qca8081_28: ethernet-phy@28 { + compatible = "ethernet-phy-id004d.d101"; + reg = <28>; + reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; + }; +}; + +&switch { + status = "okay"; + + switch_lan_bmp = ; /* lan port bitmap */ + switch_wan_bmp = ; /* wan port bitmap */ + switch_mac_mode1 = ; /* mac mode for uniphy instance1*/ + switch_mac_mode2 = ; /* mac mode for uniphy instance2*/ + + qcom,port_phyinfo { + port@5 { + port_id = <5>; + phy_address = <24>; + port_mac_sel = "QGMAC_PORT"; + }; + port@6 { + port_id = <6>; + phy_address = <28>; + port_mac_sel = "QGMAC_PORT"; + }; + }; +}; + +&edma { + status = "okay"; +}; + +&dp5_syn { + status = "okay"; + phy-handle = <&qca8081_24>; + label = "lan"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_mac_0 1>; +}; + +&dp6_syn { + status = "okay"; + phy-handle = <&qca8081_28>; + label = "wan"; + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_mac_0 0>; +}; + +&wifi { + status = "okay"; + + qcom,ath11k-calibration-variant = "ZTE-MF269"; + qcom,ath11k-fw-memory-mode = <1>; +}; diff --git a/target/linux/qualcommax/image/ipq807x.mk b/target/linux/qualcommax/image/ipq807x.mk index ce4d62d571..d8416d10fb 100644 --- a/target/linux/qualcommax/image/ipq807x.mk +++ b/target/linux/qualcommax/image/ipq807x.mk @@ -271,6 +271,20 @@ define Device/yuncore_ax880 endef TARGET_DEVICES += yuncore_ax880 +define Device/zte_mf269 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_VENDOR := ZTE + DEVICE_MODEL := MF269 + BLOCKSIZE := 128k + PAGESIZE := 2048 + DEVICE_DTS_CONFIG := config@ac04 + SOC := ipq8071 + KERNEL_SIZE := 53248k + DEVICE_PACKAGES := ipq-wifi-zte_mf269 +endef +TARGET_DEVICES += zte_mf269 + define Device/zyxel_nbg7815 $(call Device/FitImage) $(call Device/EmmcImage) diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network index cb70b27283..5da17db3fa 100644 --- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network +++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network @@ -23,7 +23,8 @@ ipq807x_setup_interfaces() ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" ;; edgecore,eap102|\ - yuncore,ax880) + yuncore,ax880|\ + zte,mf269) ucidef_set_interfaces_lan_wan "lan" "wan" ;; edimax,cax1800) diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata index e14af79598..ac1405739d 100644 --- a/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata +++ b/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata @@ -24,6 +24,7 @@ case "$FIRMWARE" in xiaomi,ax3600|\ xiaomi,ax9000|\ yuncore,ax880|\ + zte,mf269|\ zyxel,nbg7815) caldata_extract "0:art" 0x1000 0x20000 ;; diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index c7cacc99fe..3573942c54 100644 --- a/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/qualcommax/ipq807x/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -14,4 +14,8 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 1 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress ;; + zte,mf269) + [ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 3 > /sys${DEVPATH}/macaddress + ;; esac diff --git a/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh index 5a40d53883..67fd0f5402 100644 --- a/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh +++ b/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh @@ -110,6 +110,11 @@ platform_do_upgrade() { fw_setenv upgrade_available 1 nand_do_upgrade "$1" ;; + zte,mf269) + CI_KERN_UBIPART="ubi_kernel" + CI_ROOT_UBIPART="rootfs" + nand_do_upgrade "$1" + ;; zyxel,nbg7815) local config_mtdnum="$(find_mtd_index 0:bootconfig)" [ -z "$config_mtdnum" ] && reboot