From: Radu Pirea Date: Fri, 13 Jul 2018 16:47:36 +0000 (+0300) Subject: tty/serial: atmel: Change the driver to work under at91-usart MFD X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c24d25317a7c6bb3053d4c193b3cf57d1e9a3e4b;p=openwrt%2Fstaging%2Fblogic.git tty/serial: atmel: Change the driver to work under at91-usart MFD This patch modifies the place where resources and device tree properties are searched. Signed-off-by: Radu Pirea Reviewed-by: Andy Shevchenko Acked-by: Richard Genoud Acked-by: Nicolas Ferre Acked-by: Greg Kroah-Hartman Signed-off-by: Lee Jones --- diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index df8bd0c7b97d..32886c304641 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -118,6 +118,7 @@ config SERIAL_ATMEL depends on ARCH_AT91 || COMPILE_TEST select SERIAL_CORE select SERIAL_MCTRL_GPIO if GPIOLIB + select MFD_AT91_USART help This enables the driver for the on-chip UARTs of the Atmel AT91 processors. diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 8e4428725848..267d4d1de3f8 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -193,8 +193,7 @@ static struct console atmel_console; #if defined(CONFIG_OF) static const struct of_device_id atmel_serial_dt_ids[] = { - { .compatible = "atmel,at91rm9200-usart" }, - { .compatible = "atmel,at91sam9260-usart" }, + { .compatible = "atmel,at91rm9200-usart-serial" }, { /* sentinel */ } }; #endif @@ -915,6 +914,7 @@ static void atmel_tx_dma(struct uart_port *port) static int atmel_prepare_tx_dma(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct device *mfd_dev = port->dev->parent; dma_cap_mask_t mask; struct dma_slave_config config; int ret, nent; @@ -922,7 +922,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - atmel_port->chan_tx = dma_request_slave_channel(port->dev, "tx"); + atmel_port->chan_tx = dma_request_slave_channel(mfd_dev, "tx"); if (atmel_port->chan_tx == NULL) goto chan_err; dev_info(port->dev, "using %s for tx DMA transfers\n", @@ -1093,6 +1093,7 @@ static void atmel_rx_from_dma(struct uart_port *port) static int atmel_prepare_rx_dma(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + struct device *mfd_dev = port->dev->parent; struct dma_async_tx_descriptor *desc; dma_cap_mask_t mask; struct dma_slave_config config; @@ -1104,7 +1105,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port) dma_cap_zero(mask); dma_cap_set(DMA_CYCLIC, mask); - atmel_port->chan_rx = dma_request_slave_channel(port->dev, "rx"); + atmel_port->chan_rx = dma_request_slave_channel(mfd_dev, "rx"); if (atmel_port->chan_rx == NULL) goto chan_err; dev_info(port->dev, "using %s for rx DMA transfers\n", @@ -2222,8 +2223,8 @@ static const char *atmel_type(struct uart_port *port) */ static void atmel_release_port(struct uart_port *port) { - struct platform_device *pdev = to_platform_device(port->dev); - int size = pdev->resource[0].end - pdev->resource[0].start + 1; + struct platform_device *mpdev = to_platform_device(port->dev->parent); + int size = resource_size(mpdev->resource); release_mem_region(port->mapbase, size); @@ -2238,8 +2239,8 @@ static void atmel_release_port(struct uart_port *port) */ static int atmel_request_port(struct uart_port *port) { - struct platform_device *pdev = to_platform_device(port->dev); - int size = pdev->resource[0].end - pdev->resource[0].start + 1; + struct platform_device *mpdev = to_platform_device(port->dev->parent); + int size = resource_size(mpdev->resource); if (!request_mem_region(port->mapbase, size, "atmel_serial")) return -EBUSY; @@ -2341,27 +2342,28 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, { int ret; struct uart_port *port = &atmel_port->uart; + struct platform_device *mpdev = to_platform_device(pdev->dev.parent); atmel_init_property(atmel_port, pdev); atmel_set_ops(port); - uart_get_rs485_mode(&pdev->dev, &port->rs485); + uart_get_rs485_mode(&mpdev->dev, &port->rs485); port->iotype = UPIO_MEM; port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; port->ops = &atmel_pops; port->fifosize = 1; port->dev = &pdev->dev; - port->mapbase = pdev->resource[0].start; - port->irq = pdev->resource[1].start; + port->mapbase = mpdev->resource[0].start; + port->irq = mpdev->resource[1].start; port->rs485_config = atmel_config_rs485; - port->membase = NULL; + port->membase = NULL; memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring)); /* for console, the clock could already be configured */ if (!atmel_port->clk) { - atmel_port->clk = clk_get(&pdev->dev, "usart"); + atmel_port->clk = clk_get(&mpdev->dev, "usart"); if (IS_ERR(atmel_port->clk)) { ret = PTR_ERR(atmel_port->clk); atmel_port->clk = NULL; @@ -2694,13 +2696,22 @@ static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port, static int atmel_serial_probe(struct platform_device *pdev) { struct atmel_uart_port *atmel_port; - struct device_node *np = pdev->dev.of_node; + struct device_node *np = pdev->dev.parent->of_node; void *data; int ret = -ENODEV; bool rs485_enabled; BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); + /* + * In device tree there is no node with "atmel,at91rm9200-usart-serial" + * as compatible string. This driver is probed by at91-usart mfd driver + * which is just a wrapper over the atmel_serial driver and + * spi-at91-usart driver. All attributes needed by this driver are + * found in of_node of parent. + */ + pdev->dev.of_node = np; + ret = of_alias_get_id(np, "serial"); if (ret < 0) /* port id not found in platform data nor device-tree aliases: @@ -2836,6 +2847,7 @@ static int atmel_serial_remove(struct platform_device *pdev) clk_put(atmel_port->clk); atmel_port->clk = NULL; + pdev->dev.of_node = NULL; return ret; } @@ -2846,7 +2858,7 @@ static struct platform_driver atmel_serial_driver = { .suspend = atmel_serial_suspend, .resume = atmel_serial_resume, .driver = { - .name = "atmel_usart", + .name = "atmel_usart_serial", .of_match_table = of_match_ptr(atmel_serial_dt_ids), }, };