From: Paul Burton Date: Sun, 13 Aug 2017 04:36:21 +0000 (-0700) Subject: irqchip: mips-gic: Remove gic_set_dual_edge() X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c26ba670cdb84e0556436be7bf68a75a1d4f4d76;p=openwrt%2Fstaging%2Fblogic.git irqchip: mips-gic: Remove gic_set_dual_edge() Remove the gic_set_dual_edge() function in favour of using the new change_gic_dual() accessor function which provides equivalent functionality. This also allows us to remove the gic_update_bits() function which gic_set_dual_edge() was the last user of, along with the GIC_INTR_OFS() & GIC_INTR_BIT() macros. Signed-off-by: Paul Burton Acked-by: Marc Zyngier Cc: Jason Cooper Cc: Thomas Gleixner Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17031/ Signed-off-by: Ralf Baechle --- diff --git a/drivers/irqchip/irq-mips-gic.c b/drivers/irqchip/irq-mips-gic.c index 14a1682f399e..8aae9d20b82c 100644 --- a/drivers/irqchip/irq-mips-gic.c +++ b/drivers/irqchip/irq-mips-gic.c @@ -81,24 +81,6 @@ static inline void gic_write(unsigned int reg, unsigned long val) return gic_write64(reg, (u64)val); } -static inline void gic_update_bits(unsigned int reg, unsigned long mask, - unsigned long val) -{ - unsigned long regval; - - regval = gic_read(reg); - regval &= ~mask; - regval |= val; - gic_write(reg, regval); -} - -static inline void gic_set_dual_edge(unsigned int intr, unsigned int dual) -{ - gic_update_bits(GIC_REG(SHARED, GIC_SH_SET_DUAL) + GIC_INTR_OFS(intr), - 1ul << GIC_INTR_BIT(intr), - (unsigned long)dual << GIC_INTR_BIT(intr)); -} - static inline void gic_map_to_pin(unsigned int intr, unsigned int pin) { gic_write32(GIC_REG(SHARED, GIC_SH_INTR_MAP_TO_PIN_BASE) + @@ -260,32 +242,32 @@ static int gic_set_type(struct irq_data *d, unsigned int type) case IRQ_TYPE_EDGE_FALLING: change_gic_pol(irq, GIC_POL_FALLING_EDGE); change_gic_trig(irq, GIC_TRIG_EDGE); - gic_set_dual_edge(irq, GIC_TRIG_DUAL_DISABLE); + change_gic_dual(irq, GIC_DUAL_SINGLE); is_edge = true; break; case IRQ_TYPE_EDGE_RISING: change_gic_pol(irq, GIC_POL_RISING_EDGE); change_gic_trig(irq, GIC_TRIG_EDGE); - gic_set_dual_edge(irq, GIC_TRIG_DUAL_DISABLE); + change_gic_dual(irq, GIC_DUAL_SINGLE); is_edge = true; break; case IRQ_TYPE_EDGE_BOTH: /* polarity is irrelevant in this case */ change_gic_trig(irq, GIC_TRIG_EDGE); - gic_set_dual_edge(irq, GIC_TRIG_DUAL_ENABLE); + change_gic_dual(irq, GIC_DUAL_DUAL); is_edge = true; break; case IRQ_TYPE_LEVEL_LOW: change_gic_pol(irq, GIC_POL_ACTIVE_LOW); change_gic_trig(irq, GIC_TRIG_LEVEL); - gic_set_dual_edge(irq, GIC_TRIG_DUAL_DISABLE); + change_gic_dual(irq, GIC_DUAL_SINGLE); is_edge = false; break; case IRQ_TYPE_LEVEL_HIGH: default: change_gic_pol(irq, GIC_POL_ACTIVE_HIGH); change_gic_trig(irq, GIC_TRIG_LEVEL); - gic_set_dual_edge(irq, GIC_TRIG_DUAL_DISABLE); + change_gic_dual(irq, GIC_DUAL_SINGLE); is_edge = false; break; } diff --git a/include/linux/irqchip/mips-gic.h b/include/linux/irqchip/mips-gic.h index 2e9f0c43d425..bd348fc9db18 100644 --- a/include/linux/irqchip/mips-gic.h +++ b/include/linux/irqchip/mips-gic.h @@ -13,10 +13,6 @@ #define GIC_MAX_INTRS 256 -/* Constants */ -#define GIC_TRIG_DUAL_ENABLE 1 -#define GIC_TRIG_DUAL_DISABLE 0 - #define MSK(n) ((1 << (n)) - 1) /* Accessors */ @@ -38,19 +34,6 @@ #define GIC_SH_REVISIONID_OFS 0x0020 -/* Convert an interrupt number to a byte offset/bit for multi-word registers */ -#define GIC_INTR_OFS(intr) ({ \ - unsigned bits = mips_cm_is64 ? 64 : 32; \ - unsigned reg_idx = (intr) / bits; \ - unsigned reg_width = bits / 8; \ - \ - reg_idx * reg_width; \ -}) -#define GIC_INTR_BIT(intr) ((intr) % (mips_cm_is64 ? 64 : 32)) - -/* Dual edge triggering : Reset Value is always 0 */ -#define GIC_SH_SET_DUAL_OFS 0x0200 - /* Set/Clear corresponding bit in Edge Detect Register */ #define GIC_SH_WEDGE_OFS 0x0280