From: Nick Pelly Date: Fri, 13 Nov 2009 22:16:32 +0000 (-0800) Subject: Bluetooth: Enter active mode before establishing a SCO link. X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c390216b3e868b16d8154939f4b6f8c16dbd9a9f;p=openwrt%2Fstaging%2Fblogic.git Bluetooth: Enter active mode before establishing a SCO link. When in sniff mode with a long interval time (1.28s) it can take 4+ seconds to establish a SCO link. Fix by requesting active mode before requesting SCO connection. This improves SCO setup time to ~500ms. Bluetooth headsets that use a long interval time, and exhibit the long SCO connection time include Motorola H790, HX1 and H17. They have a CSR 2.1 chipset. Verified this behavior and fix with host Bluetooth chipsets: BCM4329 and TI1271. 2009-10-13 14:17:46.183722 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 1 mode 0x02 interval 2048 Mode: Sniff 2009-10-13 14:17:53.436285 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 1 voice setting 0x0060 2009-10-13 14:17:53.445593 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 2009-10-13 14:17:57.788855 > HCI Event: Synchronous Connect Complete 0x2c) plen 17 status 0x00 handle 257 bdaddr 00:1A:0E:F1:A4:7F type eSCO Air mode: CVSD Signed-off-by: Nick Pelly Signed-off-by: Marcel Holtmann --- diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index b7c4224f4e7d..b10e3cdb08f8 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -377,6 +377,9 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8 if (acl->state == BT_CONNECTED && (sco->state == BT_OPEN || sco->state == BT_CLOSED)) { + acl->power_save = 1; + hci_conn_enter_active_mode(acl); + if (lmp_esco_capable(hdev)) hci_setup_sync(sco, acl->handle); else