From: Mathias Kresin Date: Mon, 8 Jan 2018 22:24:44 +0000 (+0100) Subject: ipq806x: drop partitial supported boards X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c3d9fe96dc081f412a9d2adc4da5b7d3d2a45d5b;p=openwrt%2Fstaging%2Fdedeckeh.git ipq806x: drop partitial supported boards There are only artifacts for these boards in our tree and not even partial support. Drop teh stale files. Signed-off-by: Mathias Kresin --- diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index aec8bf27c2..95c56270fe 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -13,7 +13,7 @@ endef define Build/Compile endef -ALLWIFIBOARDS:=rt-ac58u fritz4040 nbg6617 +ALLWIFIBOARDS:=fritz4040 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD)) define Package/ipq-wifi-default @@ -47,8 +47,6 @@ Don't install it for any other device! PREV_BOARD+=ipq-wifi-$(1) endef -$(eval $(call generate-ipq-wifi-package,rt-ac58u,board-rt-ac58u.bin,ASUS RT-AC58U/RT-ACRH13)) $(eval $(call generate-ipq-wifi-package,fritz4040,board-fritz4040.bin,AVM FRITZBox 4040)) -$(eval $(call generate-ipq-wifi-package,nbg6617,board-nbg6617.bin,ZyXEL NBG6617)) $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE)))) diff --git a/package/firmware/ipq-wifi/board-nbg6617.bin b/package/firmware/ipq-wifi/board-nbg6617.bin deleted file mode 100644 index ab4d43e8cb..0000000000 Binary files a/package/firmware/ipq-wifi/board-nbg6617.bin and /dev/null differ diff --git a/package/firmware/ipq-wifi/board-rt-ac58u.bin b/package/firmware/ipq-wifi/board-rt-ac58u.bin deleted file mode 100644 index 379bdc8ce2..0000000000 Binary files a/package/firmware/ipq-wifi/board-rt-ac58u.bin and /dev/null differ diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts deleted file mode 100644 index a00dee7f27..0000000000 --- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts +++ /dev/null @@ -1,135 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019-ap.dk01.1.dtsi" -#include "qcom-ipq4019-bus.dtsi" -#include -#include - -/ { - model = "ZyXEL NBG6617"; - compatible = "zyxel,nbg6617", "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - reserved-memory { - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - - rsvd1@87000000 { - reg = <0x87000000 0x0500000>; - no-map; - }; - - wifi_dump@87500000 { - reg = <0x87500000 0x600000>; - no-map; - }; - - rsvd2@87B00000 { - reg = <0x87b00000 0x500000>; - no-map; - }; - }; - - soc { - pinctrl@1000000 { - led_pinmux { - mux { - pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58"; - drive-strength = <0x8>; - bias-pull-up; - output-high; - }; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 0x2 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 0x3f GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&tlmm 0x4 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - power: power { - label = "nbg6617:green:power"; - gpios = <&tlmm 0x3 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "nbg6617:green:wps"; - gpios = <&tlmm 0x1 GPIO_ACTIVE_HIGH>; - }; - - wlan2G { - label = "nbg6617:green:wlan2G"; - gpios = <&tlmm 0x3a GPIO_ACTIVE_HIGH>; - }; - - wlan5G { - label = "nbg6617:green:wlan5G"; - gpios = <&tlmm 0x5 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&spi_0 { /* BLSP1 QUP1 */ - n25q128a11@0 { - status = "okay"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "all"; - reg = <0x00000000 0x08000000>; - read-only; /* for now */ - }; - }; - }; -}; diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts deleted file mode 100644 index 6efd0df19b..0000000000 --- a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-rt-ac58u.dts +++ /dev/null @@ -1,197 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019-ap.dk01.1.dtsi" -#include "qcom-ipq4019-bus.dtsi" -#include -#include - -/ { - model = "ASUS RT-AC58U"; - compatible = "asus,rt-ac58u", "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x8000000>; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - reserved-memory { - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - - rsvd1@87E00000 { - reg = <0x87e00000 0x200000>; - no-map; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - power: status { - label = "rt-ac58u:blue:status"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wan { - label = "rt-ac58u:blue:wan"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan2G { - label = "rt-ac58u:blue:wlan2G"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - wan5G { - label = "rt-ac58u:blue:wlan5G"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - usb { - label = "rt-ac58u:blue:usb"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - - lan { - label = "rt-ac58u:blue:lan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&spi_0_pins { - pinmux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - }; - pinconf_cs { - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; -}; - -&spi_0 { /* BLSP1 QUP1 */ - cs-gpios = <&tlmm 54 0>, - <&tlmm 59 0>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <0>; - /* - * U-boot looks for "n25q128a11" node, - * if we don't have it, it will spit out the following warning: - * "ipq: fdt fixup unable to find compatible node". - */ - compatible = "mx25l1606e", "n25q128a11"; - reg = <0>; - linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition5@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition5@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - /* 0x00180000 - 0x00200000 unused */ - }; - }; - - mt29f@1 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "spinand,mt29f", "w25n01gv"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; diff --git a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch index bab2808789..a6c66d703c 100644 --- a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch @@ -10,13 +10,11 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -618,7 +618,18 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -618,7 +618,16 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8084-mtp.dtb \ qcom-ipq4019-ap.dk01.1-c1.dtb \ qcom-ipq4019-ap.dk04.1-c1.dtb \ + qcom-ipq4019-fritz4040.dtb \ -+ qcom-ipq4019-nbg6617.dtb \ -+ qcom-ipq4019-rt-ac58u.dtb \ qcom-ipq8064-ap148.dtb \ + qcom-ipq8064-c2600.dtb \ + qcom-ipq8064-d7800.dtb \ diff --git a/target/linux/ipq806x/patches-4.9/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch b/target/linux/ipq806x/patches-4.9/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch deleted file mode 100644 index ee19f363bd..0000000000 --- a/target/linux/ipq806x/patches-4.9/400-mtd-ubi-add-quirk-to-autoload-ubi-on-rt-ac58u.patch +++ /dev/null @@ -1,29 +0,0 @@ -From b8f3a7ccbeca5bdbd1b6210b94b38d3fef2dd0bd Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 19 Jan 2017 01:57:22 +0100 -Subject: [PATCH 16/38] mtd: ubi: add auto_attach HACK for the ASUS RT-AC58U - -This patch adds a hack that allows UBI's autoattach feature -to work with the custom ASUS UBI_DEV partition name. - -This is necessary because the vendor's u-boot doesn't leave -the bootargs / cmdline alone, so the it can't be overwritten -easily otherwise. - -Signed-off-by: Christian Lamparter ---- - drivers/mtd/ubi/build.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/mtd/ubi/build.c -+++ b/drivers/mtd/ubi/build.c -@@ -1225,6 +1225,9 @@ static void __init ubi_auto_attach(void) - mtd = open_mtd_device("ubi"); - if (IS_ERR(mtd)) - mtd = open_mtd_device("data"); -+ /* Hack for the Asus RT-AC58U */ -+ if (IS_ERR(mtd)) -+ mtd = open_mtd_device("UBI_DEV"); - - if (!IS_ERR(mtd)) { - size_t len;