From: Florian Fainelli Date: Wed, 24 Jul 2013 16:12:10 +0000 (+0100) Subject: MIPS: BMIPS: do not change interrupt routing depending on boot CPU X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c4091d3fbbed922a3641e5e749655e49cc0d4dee;p=openwrt%2Fstaging%2Fblogic.git MIPS: BMIPS: do not change interrupt routing depending on boot CPU Commit 4df715aa ("MIPS: BMIPS: support booting from physical CPU other than 0") changed the interupt routing when we are booting from physical CPU 0, but the settings are actually correct if we are booting from physical CPU 0 or CPU 1. Revert that specific change. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: blogic@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5622/ Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index c0bb4d59076a..89417c9c6aca 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -79,15 +79,9 @@ static void __init bmips_smp_setup(void) * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output - * - * If booting from TP1, leave the existing CMT interrupt routing - * such that TP0 responds to SW1 and TP1 responds to SW0. */ - if (boot_cpu == 0) - change_c0_brcm_cmt_intr(0xf8018000, + change_c0_brcm_cmt_intr(0xf8018000, (0x02 << 27) | (0x03 << 15)); - else - change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27)); /* single core, 2 threads (2 pipelines) */ max_cpus = 2;