From: David Bauer Date: Mon, 30 Dec 2019 14:06:42 +0000 (+0100) Subject: ramips: add LED trigger for TL-WR902AC v3 WAN LED X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c48b571ad708b9f66efb0c2942291c2d8f1d7780;p=openwrt%2Fstaging%2Fthess.git ramips: add LED trigger for TL-WR902AC v3 WAN LED This adds an LED trigger for the WAN LED on top of the TP-Link TL-WR902AC v3. Currently, only the LED on the port itself shows the link state, while the LED on top of the device stays dark. The WAN port of the device is a hybrid LAN/WAN one, hence why the LED at the port was labled LAN. Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index f397da14a3..f410c47eac 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -98,6 +98,7 @@ tplink,tl-wr841n-v14) tplink,tl-wr902ac-v3) ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" ;; unielec,u7628-01-16m) ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"