From: Adrian Schmutzler Date: Sun, 4 Oct 2020 16:00:28 +0000 (+0200) Subject: bcm63xx: reorganize board patches into fewer files X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c4ab1b7dd9d0194ef8e90847f0fb3e2bf23bfc67;p=openwrt%2Fstaging%2Fthess.git bcm63xx: reorganize board patches into fewer files At the moment, bcm63xx creates one patch for each board to add to board_bcm963xx.c. While this is not really helpful to get an overview in the first place, it is particularly painful if you want to change something for an early file and have to refresh all the later patches accordingly. Since it does not look like these board patches are upstreamed either, this commit consolidates all board additions into one patch per "board". By this, both adding and editing boards should become much simpler, and we drop about 1300 lines of "code" from patches as well. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/bcm63xx/patches-5.4/501-board_bcm6318-brcm-bcm96318ref.patch b/target/linux/bcm63xx/patches-5.4/501-board_bcm6318-brcm-bcm96318ref.patch deleted file mode 100644 index 0313285eaa..0000000000 --- a/target/linux/bcm63xx/patches-5.4/501-board_bcm6318-brcm-bcm96318ref.patch +++ /dev/null @@ -1,74 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -49,6 +49,53 @@ static struct board_info __initdata boar - #endif /* CONFIG_BCM63XX_CPU_3368 */ - - /* -+ * known 6318 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6318 -+static struct board_info __initdata board_96318ref = { -+ .name = "96318REF", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_usbd = 1, -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_6318 */ -+ -+/* - * known 6328 boards - */ - #ifdef CONFIG_BCM63XX_CPU_6328 -@@ -410,6 +457,9 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_3368 - &board_cvg834g, - #endif /* CONFIG_BCM63XX_CPU_3368 */ -+#ifdef CONFIG_BCM63XX_CPU_6318 -+ &board_96318ref, -+#endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, - #endif /* CONFIG_BCM63XX_CPU_6328 */ -@@ -444,6 +494,7 @@ static struct of_device_id const bcm963x - { .compatible = "netgear,cvg834g", .data = &board_cvg834g, }, - #endif /* CONFIG_BCM63XX_CPU_3368 */ - #ifdef CONFIG_BCM63XX_CPU_6318 -+ { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/501-board_bcm6328-extend-96328avng-reference-board.patch b/target/linux/bcm63xx/patches-5.4/501-board_bcm6328-extend-96328avng-reference-board.patch new file mode 100644 index 0000000000..d65b9413ec --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/501-board_bcm6328-extend-96328avng-reference-board.patch @@ -0,0 +1,35 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -64,6 +64,32 @@ static struct board_info __initdata boar + .use_fullspeed = 0, + .port_no = 0, + }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, + }; + #endif /* CONFIG_BCM63XX_CPU_6328 */ + diff --git a/target/linux/bcm63xx/patches-5.4/502-board-bcm6358-DWV-S0_fixes.patch b/target/linux/bcm63xx/patches-5.4/502-board-bcm6358-DWV-S0_fixes.patch new file mode 100644 index 0000000000..8019136861 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/502-board-bcm6358-DWV-S0_fixes.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -426,6 +426,7 @@ static struct board_info __initdata boar + }, + + .has_ohci0 = 1, ++ .has_ehci0 = 1, + }; + #endif /* CONFIG_BCM63XX_CPU_6358 */ + diff --git a/target/linux/bcm63xx/patches-5.4/502-board_bcm6318-brcm-bcm96318ref-p300.patch b/target/linux/bcm63xx/patches-5.4/502-board_bcm6318-brcm-bcm96318ref-p300.patch deleted file mode 100644 index 1796d066a5..0000000000 --- a/target/linux/bcm63xx/patches-5.4/502-board_bcm6318-brcm-bcm96318ref-p300.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -93,6 +93,48 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_96318ref_p300 = { -+ .name = "96318REF_P300", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_usbd = 1, -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6318 */ - - /* -@@ -459,6 +501,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_3368 */ - #ifdef CONFIG_BCM63XX_CPU_6318 - &board_96318ref, -+ &board_96318ref_p300, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -@@ -495,6 +538,7 @@ static struct of_device_id const bcm963x - #endif /* CONFIG_BCM63XX_CPU_3368 */ - #ifdef CONFIG_BCM63XX_CPU_6318 - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, -+ { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/503-board_bcm6318-d-link-dsl-275xb-d.patch b/target/linux/bcm63xx/patches-5.4/503-board_bcm6318-d-link-dsl-275xb-d.patch deleted file mode 100644 index 05022aa277..0000000000 --- a/target/linux/bcm63xx/patches-5.4/503-board_bcm6318-d-link-dsl-275xb-d.patch +++ /dev/null @@ -1,91 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -135,6 +135,72 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = { -+ { .offset = 96, .value = 0x2046 }, -+ { .offset = 97, .value = 0xfe9d }, -+ { .offset = 98, .value = 0x1854 }, -+ { .offset = 99, .value = 0xfa59 }, -+ { .offset = 112, .value = 0x2046 }, -+ { .offset = 113, .value = 0xfe79 }, -+ { .offset = 114, .value = 0x17f5 }, -+ { .offset = 115, .value = 0xfa47 }, -+ { .offset = 161, .value = 0x2222 }, -+ { .offset = 162, .value = 0x2222 }, -+ { .offset = 169, .value = 0x2222 }, -+ { .offset = 170, .value = 0x2222 }, -+ { .offset = 171, .value = 0x5555 }, -+ { .offset = 172, .value = 0x5555 }, -+ { .offset = 173, .value = 0x4444 }, -+ { .offset = 174, .value = 0x4444 }, -+ { .offset = 175, .value = 0x5555 }, -+ { .offset = 176, .value = 0x5555 }, -+}; -+ -+static struct board_info __initdata board_dsl_2751b_d1 = { -+ .name = "AW5200B", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = dsl2751b_e1_fixups, -+ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6318 */ - - /* -@@ -502,6 +568,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6318 - &board_96318ref, - &board_96318ref_p300, -+ &board_dsl_2751b_d1, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -@@ -539,6 +606,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6318 - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, -+ { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/504-board_bcm6318-sagem-fast-2704n.patch b/target/linux/bcm63xx/patches-5.4/504-board_bcm6318-sagem-fast-2704n.patch deleted file mode 100644 index 2bb1f60241..0000000000 --- a/target/linux/bcm63xx/patches-5.4/504-board_bcm6318-sagem-fast-2704n.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -201,6 +201,49 @@ static struct board_info __initdata boar - .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), - }, - }; -+ -+static struct board_info __initdata board_FAST2704N = { -+ .name = "F@ST2704N", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6318 */ - - /* -@@ -569,6 +612,7 @@ static const struct board_info __initcon - &board_96318ref, - &board_96318ref_p300, - &board_dsl_2751b_d1, -+ &board_FAST2704N, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -@@ -607,6 +651,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, - { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, -+ { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/505-board_bcm6318-comtrend-ar-5315u.patch b/target/linux/bcm63xx/patches-5.4/505-board_bcm6318-comtrend-ar-5315u.patch deleted file mode 100644 index dc480f239d..0000000000 --- a/target/linux/bcm63xx/patches-5.4/505-board_bcm6318-comtrend-ar-5315u.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -136,6 +136,65 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ar5315u_fixups[] = { -+ { .offset = 6, .value = 0x1c00 }, -+ { .offset = 65, .value = 0x1255 }, -+ { .offset = 97, .value = 0xfe55 }, -+ { .offset = 98, .value = 0x171d }, -+ { .offset = 99, .value = 0xfa42 }, -+ { .offset = 113, .value = 0xfeb7 }, -+ { .offset = 114, .value = 0x18cd }, -+ { .offset = 115, .value = 0xfa4f }, -+ { .offset = 162, .value = 0x6444 }, -+ { .offset = 170, .value = 0x6444 }, -+ { .offset = 172, .value = 0x6444 }, -+}; -+ -+static struct board_info __initdata board_AR5315u = { -+ .name = "96318A-1441N1", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN4", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ar5315u_fixups, -+ .num_board_fixups = ARRAY_SIZE(ar5315u_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = { - { .offset = 96, .value = 0x2046 }, - { .offset = 97, .value = 0xfe9d }, -@@ -611,6 +670,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6318 - &board_96318ref, - &board_96318ref_p300, -+ &board_AR5315u, - &board_dsl_2751b_d1, - &board_FAST2704N, - #endif /* CONFIG_BCM63XX_CPU_6318 */ -@@ -650,6 +710,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6318 - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, -+ { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, }, - { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, - { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ diff --git a/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch b/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch new file mode 100644 index 0000000000..ef5989ba43 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/511-board_bcm6318.patch @@ -0,0 +1,292 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -49,6 +49,263 @@ static struct board_info __initdata boar + #endif /* CONFIG_BCM63XX_CPU_3368 */ + + /* ++ * known 6318 boards ++ */ ++#ifdef CONFIG_BCM63XX_CPU_6318 ++static struct board_info __initdata board_96318ref = { ++ .name = "96318REF", ++ .expected_cpu_id = 0x6318, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_usbd = 1, ++ .usbd = { ++ .use_fullspeed = 0, ++ .port_no = 0, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_96318ref_p300 = { ++ .name = "96318REF_P300", ++ .expected_cpu_id = 0x6318, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_usbd = 1, ++ .usbd = { ++ .use_fullspeed = 0, ++ .port_no = 0, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; ++ ++static struct sprom_fixup __initdata ar5315u_fixups[] = { ++ { .offset = 6, .value = 0x1c00 }, ++ { .offset = 65, .value = 0x1255 }, ++ { .offset = 97, .value = 0xfe55 }, ++ { .offset = 98, .value = 0x171d }, ++ { .offset = 99, .value = 0xfa42 }, ++ { .offset = 113, .value = 0xfeb7 }, ++ { .offset = 114, .value = 0x18cd }, ++ { .offset = 115, .value = 0xfa4f }, ++ { .offset = 162, .value = 0x6444 }, ++ { .offset = 170, .value = 0x6444 }, ++ { .offset = 172, .value = 0x6444 }, ++}; ++ ++static struct board_info __initdata board_AR5315u = { ++ .name = "96318A-1441N1", ++ .expected_cpu_id = 0x6318, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "LAN4", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = ar5315u_fixups, ++ .num_board_fixups = ARRAY_SIZE(ar5315u_fixups), ++ }, ++}; ++ ++static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = { ++ { .offset = 96, .value = 0x2046 }, ++ { .offset = 97, .value = 0xfe9d }, ++ { .offset = 98, .value = 0x1854 }, ++ { .offset = 99, .value = 0xfa59 }, ++ { .offset = 112, .value = 0x2046 }, ++ { .offset = 113, .value = 0xfe79 }, ++ { .offset = 114, .value = 0x17f5 }, ++ { .offset = 115, .value = 0xfa47 }, ++ { .offset = 161, .value = 0x2222 }, ++ { .offset = 162, .value = 0x2222 }, ++ { .offset = 169, .value = 0x2222 }, ++ { .offset = 170, .value = 0x2222 }, ++ { .offset = 171, .value = 0x5555 }, ++ { .offset = 172, .value = 0x5555 }, ++ { .offset = 173, .value = 0x4444 }, ++ { .offset = 174, .value = 0x4444 }, ++ { .offset = 175, .value = 0x5555 }, ++ { .offset = 176, .value = 0x5555 }, ++}; ++ ++static struct board_info __initdata board_dsl_2751b_d1 = { ++ .name = "AW5200B", ++ .expected_cpu_id = 0x6318, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = dsl2751b_e1_fixups, ++ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), ++ }, ++}; ++ ++static struct board_info __initdata board_FAST2704N = { ++ .name = "F@ST2704N", ++ .expected_cpu_id = 0x6318, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ }, ++}; ++#endif /* CONFIG_BCM63XX_CPU_6318 */ ++ ++/* + * known 6328 boards + */ + #ifdef CONFIG_BCM63XX_CPU_6328 +@@ -437,6 +694,13 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_3368 + &board_cvg834g, + #endif /* CONFIG_BCM63XX_CPU_3368 */ ++#ifdef CONFIG_BCM63XX_CPU_6318 ++ &board_96318ref, ++ &board_96318ref_p300, ++ &board_AR5315u, ++ &board_dsl_2751b_d1, ++ &board_FAST2704N, ++#endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, + #endif /* CONFIG_BCM63XX_CPU_6328 */ +@@ -471,6 +735,11 @@ static struct of_device_id const bcm963x + { .compatible = "netgear,cvg834g", .data = &board_cvg834g, }, + #endif /* CONFIG_BCM63XX_CPU_3368 */ + #ifdef CONFIG_BCM63XX_CPU_6318 ++ { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, ++ { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, ++ { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, }, ++ { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, ++ { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/512-board_bcm6328.patch b/target/linux/bcm63xx/patches-5.4/512-board_bcm6328.patch new file mode 100644 index 0000000000..abab912092 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/512-board_bcm6328.patch @@ -0,0 +1,521 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -348,6 +348,482 @@ static struct board_info __initdata boar + }, + }, + }; ++ ++static struct board_info __initdata board_963281TAN = { ++ .name = "963281TAN", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_A4001N = { ++ .name = "96328dg2x2", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43225, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ }, ++}; ++ ++static struct board_info __initdata board_A4001N1 = { ++ .name = "963281T_TEF", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43225, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ }, ++}; ++ ++static struct sprom_fixup __initdata ad1018_fixups[] = { ++ { .offset = 6, .value = 0x1c00 }, ++ { .offset = 65, .value = 0x1256 }, ++ { .offset = 96, .value = 0x2046 }, ++ { .offset = 97, .value = 0xfe69 }, ++ { .offset = 98, .value = 0x1726 }, ++ { .offset = 99, .value = 0xfa5c }, ++ { .offset = 112, .value = 0x2046 }, ++ { .offset = 113, .value = 0xfea8 }, ++ { .offset = 114, .value = 0x1978 }, ++ { .offset = 115, .value = 0xfa26 }, ++ { .offset = 161, .value = 0x2222 }, ++ { .offset = 169, .value = 0x2222 }, ++ { .offset = 171, .value = 0x2222 }, ++ { .offset = 173, .value = 0x2222 }, ++ { .offset = 174, .value = 0x4444 }, ++ { .offset = 175, .value = 0x2222 }, ++ { .offset = 176, .value = 0x4444 }, ++}; ++ ++static struct board_info __initdata board_AD1018 = { ++ .name = "96328avngr", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "FIBRE", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = ad1018_fixups, ++ .num_board_fixups = ARRAY_SIZE(ad1018_fixups), ++ }, ++}; ++ ++static struct sprom_fixup __initdata ar5381u_fixups[] = { ++ { .offset = 97, .value = 0xfee5 }, ++ { .offset = 98, .value = 0x157c }, ++ { .offset = 99, .value = 0xfae7 }, ++ { .offset = 113, .value = 0xfefa }, ++ { .offset = 114, .value = 0x15d6 }, ++ { .offset = 115, .value = 0xfaf8 }, ++}; ++ ++static struct board_info __initdata board_AR5381u = { ++ .name = "96328A-1241N", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43225, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = ar5381u_fixups, ++ .num_board_fixups = ARRAY_SIZE(ar5381u_fixups), ++ }, ++}; ++ ++static struct sprom_fixup __initdata ar5387un_fixups[] = { ++ { .offset = 2, .value = 0x05bb }, ++ { .offset = 65, .value = 0x1204 }, ++ { .offset = 78, .value = 0x0303 }, ++ { .offset = 79, .value = 0x0202 }, ++ { .offset = 80, .value = 0xff02 }, ++ { .offset = 87, .value = 0x0315 }, ++ { .offset = 88, .value = 0x0315 }, ++ { .offset = 96, .value = 0x2048 }, ++ { .offset = 97, .value = 0xff11 }, ++ { .offset = 98, .value = 0x1567 }, ++ { .offset = 99, .value = 0xfb24 }, ++ { .offset = 100, .value = 0x3e3c }, ++ { .offset = 101, .value = 0x4038 }, ++ { .offset = 102, .value = 0xfe7f }, ++ { .offset = 103, .value = 0x1279 }, ++ { .offset = 112, .value = 0x2048 }, ++ { .offset = 113, .value = 0xff03 }, ++ { .offset = 114, .value = 0x154c }, ++ { .offset = 115, .value = 0xfb27 }, ++ { .offset = 116, .value = 0x3e3c }, ++ { .offset = 117, .value = 0x4038 }, ++ { .offset = 118, .value = 0xfe87 }, ++ { .offset = 119, .value = 0x1233 }, ++ { .offset = 203, .value = 0x2226 }, ++}; ++ ++static struct board_info __initdata board_AR5387un = { ++ .name = "96328A-1441N1", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43225, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = ar5387un_fixups, ++ .num_board_fixups = ARRAY_SIZE(ar5387un_fixups), ++ }, ++}; ++ ++static struct board_info __initdata board_dsl_274xb_f1 = { ++ .name = "AW4339U", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_ATHEROS, ++ .caldata_offset = 0x7d1000, ++ .slot = 0, ++ .led_pin = -1, ++ .led_active_high = 1, ++ }, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 4", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 1", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_FAST2704V2 = { ++ .name = "F@ST2704V2", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .has_usbd = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_PDG_A4001N_A_000_1A1_AX = { ++ .name = "96328avng", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43225, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ }, ++}; ++ ++static struct board_info __initdata board_R5010UNV2 = { ++ .name = "96328ang", ++ .expected_cpu_id = 0x6328, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6328 */ + + /* +@@ -703,6 +1179,16 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, ++ &board_963281TAN, ++ &board_A4001N, ++ &board_A4001N1, ++ &board_AD1018, ++ &board_AR5381u, ++ &board_AR5387un, ++ &board_dsl_274xb_f1, ++ &board_FAST2704V2, ++ &board_PDG_A4001N_A_000_1A1_AX, ++ &board_R5010UNV2, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + &board_96338gw, +@@ -742,7 +1228,18 @@ static struct of_device_id const bcm963x + { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, + #endif /* CONFIG_BCM63XX_CPU_6318 */ + #ifdef CONFIG_BCM63XX_CPU_6328 ++ { .compatible = "adb,a4001n", .data = &board_A4001N, }, ++ { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, ++ { .compatible = "adb,pdg-a4001n-a-000-1a1-ax", .data = &board_PDG_A4001N_A_000_1A1_AX, }, + { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, ++ { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, ++ { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, ++ { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, ++ { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, ++ { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, }, ++ { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, ++ { .compatible = "sercomm,ad1018", .data = &board_AD1018, }, ++ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, }, + #endif /* CONFIG_BCM63XX_CPU_6328 */ + #ifdef CONFIG_BCM63XX_CPU_6338 + { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-5.4/513-board-bcm6338.patch b/target/linux/bcm63xx/patches-5.4/513-board-bcm6338.patch new file mode 100644 index 0000000000..85c8e6c390 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/513-board-bcm6338.patch @@ -0,0 +1,53 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -857,6 +857,32 @@ static struct board_info __initdata boar + .force_duplex_full = 1, + }, + }; ++ ++static struct board_info __initdata board_96338w2_e7t = { ++ .name = "96338W2_E7T", ++ .expected_cpu_id = 0x6338, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_rta1320_16m = { ++ .name = "RTA1320_16M", ++ .expected_cpu_id = 0x6338, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6338 */ + + /* +@@ -1193,6 +1219,8 @@ static const struct board_info __initcon + #ifdef CONFIG_BCM63XX_CPU_6338 + &board_96338gw, + &board_96338w, ++ &board_96338w2_e7t, ++ &board_rta1320_16m, + #endif /* CONFIG_BCM63XX_CPU_6338 */ + #ifdef CONFIG_BCM63XX_CPU_6345 + &board_96345gw2, +@@ -1244,6 +1272,8 @@ static struct of_device_id const bcm963x + #ifdef CONFIG_BCM63XX_CPU_6338 + { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, + { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, ++ { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, }, ++ { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, }, + #endif /* CONFIG_BCM63XX_CPU_6338 */ + #ifdef CONFIG_BCM63XX_CPU_6345 + { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, diff --git a/target/linux/bcm63xx/patches-5.4/514-board_bcm6345.patch b/target/linux/bcm63xx/patches-5.4/514-board_bcm6345.patch new file mode 100644 index 0000000000..d881555853 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/514-board_bcm6345.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -893,6 +893,19 @@ static struct board_info __initdata boar + .name = "96345GW2", + .expected_cpu_id = 0x6345, + }; ++ ++static struct board_info __initdata board_rta770w = { ++ .name = "RTA770BW", ++ .expected_cpu_id = 0x6345, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6345 */ + + /* +@@ -1224,6 +1237,7 @@ static const struct board_info __initcon + #endif /* CONFIG_BCM63XX_CPU_6338 */ + #ifdef CONFIG_BCM63XX_CPU_6345 + &board_96345gw2, ++ &board_rta770w, + #endif /* CONFIG_BCM63XX_CPU_6345 */ + #ifdef CONFIG_BCM63XX_CPU_6348 + &board_96348r, +@@ -1277,6 +1291,8 @@ static struct of_device_id const bcm963x + #endif /* CONFIG_BCM63XX_CPU_6338 */ + #ifdef CONFIG_BCM63XX_CPU_6345 + { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, ++ { .compatible = "dynalink,rta770bw", .data = &board_rta770w, }, ++ { .compatible = "dynalink,rta770w", .data = &board_rta770w, }, + #endif /* CONFIG_BCM63XX_CPU_6345 */ + #ifdef CONFIG_BCM63XX_CPU_6348 + { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-5.4/515-board-bcm6348.patch b/target/linux/bcm63xx/patches-5.4/515-board-bcm6348.patch new file mode 100644 index 0000000000..1e93c5e443 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/515-board-bcm6348.patch @@ -0,0 +1,328 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1092,6 +1092,275 @@ static struct board_info __initdata boar + + .has_ohci0 = 1, + }; ++ ++static struct board_info __initdata board_96348A_122 = { ++ .name = "96348A-122", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_96348_D4PW = { ++ .name = "D-4P-W", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_96348gw_10_AR1004G = { ++ .name = "AR1004G", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_96348sv = { ++ .name = "MAGIC", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ /* it has BP_ENET_EXTERNAL_PHY */ ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++/* NetGear DG834G v4 */ ++static struct board_info __initdata board_96348W3 = { ++ .name = "96348W3", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_CPVA502plus = { ++ .name = "CPVA502+", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .ephy_reset_gpio = 4, ++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_ct536_ct5621 = { ++ .name = "CT536_CT5621", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_FAST2604 = { ++ .name = "F@ST2604", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_gw6000 = { ++ .name = "GW6000", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_gw6200 = { ++ .name = "GW6200", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct sprom_fixup __initdata spw500v_fixups[] = { ++ { .offset = 46, .value = 0x3046 }, ++ { .offset = 47, .value = 0x15a7 }, ++ { .offset = 48, .value = 0xfa89 }, ++ { .offset = 49, .value = 0xfe79 }, ++ { .offset = 57, .value = 0x6a49 }, ++}; ++ ++static struct board_info __initdata board_spw500v = { ++ .name = "SPW500V", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = spw500v_fixups, ++ .num_board_fixups = ARRAY_SIZE(spw500v_fixups), ++ }, ++}; ++ ++/* BT Voyager 2110 */ ++static struct board_info __initdata board_V2110 = { ++ .name = "V2110", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_V2500V_BB = { ++ .name = "V2500V_BB", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pci = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6348 */ + + /* +@@ -1248,6 +1517,19 @@ static const struct board_info __initcon + &board_DV201AMR, + &board_96348gw_a, + &board_rta1025w_16, ++ &board_96348A_122, ++ &board_96348_D4PW, ++ &board_96348gw_10_AR1004G, ++ &board_96348sv, ++ &board_96348W3, ++ &board_CPVA502plus, ++ &board_ct536_ct5621, ++ &board_FAST2604, ++ &board_gw6000, ++ &board_gw6200, ++ &board_spw500v, ++ &board_V2110, ++ &board_V2500V_BB, + #endif /* CONFIG_BCM63XX_CPU_6348 */ + #ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, +@@ -1295,15 +1577,29 @@ static struct of_device_id const bcm963x + { .compatible = "dynalink,rta770w", .data = &board_rta770w, }, + #endif /* CONFIG_BCM63XX_CPU_6345 */ + #ifdef CONFIG_BCM63XX_CPU_6348 ++ { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, }, + { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, + { .compatible = "brcm,bcm96348r", .data = &board_96348r, }, + { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, + { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, + { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, ++ { .compatible = "bt,voyager-2110", .data = &board_V2110, }, ++ { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, ++ { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, }, ++ { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, }, ++ { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, }, ++ { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, + { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, + { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, + { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, ++ { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, }, + { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, ++ { .compatible = "sagem,fast-2604", .data = &board_FAST2604, }, ++ { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, ++ { .compatible = "tecom,gw6000", .data = &board_gw6000, }, ++ { .compatible = "tecom,gw6200", .data = &board_gw6200, }, ++ { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, }, ++ { .compatible = "telsey,magic", .data = &board_96348sv, }, + { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, + { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, + #endif /* CONFIG_BCM63XX_CPU_6348 */ diff --git a/target/linux/bcm63xx/patches-5.4/516-board-bcm6358.patch b/target/linux/bcm63xx/patches-5.4/516-board-bcm6358.patch new file mode 100644 index 0000000000..18f813b9b8 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/516-board-bcm6358.patch @@ -0,0 +1,384 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -1445,6 +1446,88 @@ static struct board_info __initdata boar + .has_ehci0 = 1, + }; + ++static struct board_info __initdata board_CPVA642 = { ++ .name = "CPVA642", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_ct6373_1 = { ++ .name = "CT6373-1", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ ++/* D-Link DSL-274xB revison C2/C3 */ ++static struct board_info __initdata board_dsl_274xb_rev_c = { ++ .name = "AW4139", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++/* D-Link DVA-G3810BN/TL */ ++static struct board_info __initdata board_DVAG3810BN = { ++ .name = "DVAG3810BN", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ + static struct board_info __initdata board_DWVS0 = { + .name = "DWV-S0", + .expected_cpu_id = 0x6358, +@@ -1469,6 +1552,238 @@ static struct board_info __initdata boar + .has_ohci0 = 1, + .has_ehci0 = 1, + }; ++ ++static struct board_info __initdata board_homehub2a = { ++ .name = "HOMEHUB2A", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4322, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_HW520 = { ++ .name = "HW6358GW_B", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_HW553 = { ++ .name = "HW553", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_HW556_A = { ++ .name = "HW556_A", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_ATHEROS, ++ .caldata_offset = 0xf7e000, ++ .slot = 1, ++ .endian_check = 1, ++ .led_pin = 2, ++ .led_active_high = 1, ++ }, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_HW556_B = { ++ .name = "HW556_B", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_ATHEROS, ++ .caldata_offset = 0xefe000, ++ .slot = 1, ++ .endian_check = 1, ++ .led_pin = 2, ++ .led_active_high = 1, ++ }, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_HW556_C = { ++ .name = "HW556_C", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_RALINK, ++ .caldata_offset = 0xeffe00, ++ .slot = 1, ++ .eeprom = "rt2x00.eeprom", ++ }, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_nb4_ser_r0 = { ++ .name = "NB4-SER-r0", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_nb4_fxc_r1 = { ++ .name = "NB4-FXC-r1", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++}; ++ ++ /* T-Home Speedport W 303V Typ B */ ++static struct board_info __initdata board_spw303v = { ++ .name = "96358-502V", ++ .expected_cpu_id = 0x6358, ++ ++ .has_pci = 1, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++}; + #endif /* CONFIG_BCM63XX_CPU_6358 */ + + /* +@@ -1535,7 +1850,20 @@ static const struct board_info __initcon + &board_96358vw, + &board_96358vw2, + &board_AGPFS0, ++ &board_CPVA642, ++ &board_ct6373_1, ++ &board_dsl_274xb_rev_c, ++ &board_DVAG3810BN, + &board_DWVS0, ++ &board_homehub2a, ++ &board_HW520, ++ &board_HW553, ++ &board_HW556_A, ++ &board_HW556_B, ++ &board_HW556_C, ++ &board_nb4_ser_r0, ++ &board_nb4_fxc_r1, ++ &board_spw303v, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + }; + +@@ -1607,11 +1935,24 @@ static struct of_device_id const bcm963x + { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, + { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, + { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, ++ { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, ++ { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, }, + { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, ++ { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, ++ { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, ++ { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, }, ++ { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, ++ { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, }, ++ { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, }, ++ { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, }, + { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, + { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, + { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, + { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, ++ { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, ++ { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, ++ { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, }, ++ { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 + #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/517-board_bcm6362.patch b/target/linux/bcm63xx/patches-5.4/517-board_bcm6362.patch new file mode 100644 index 0000000000..8e87c0cc55 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/517-board_bcm6362.patch @@ -0,0 +1,144 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -1786,6 +1786,117 @@ static struct board_info __initdata boar + }; + #endif /* CONFIG_BCM63XX_CPU_6358 */ + ++#ifdef CONFIG_BCM63XX_CPU_6362 ++static struct board_info __initdata board_dgnd3700v2 = { ++ .name = "96362ADVN2xh", ++ .expected_cpu_id = 0x6362, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [4] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_fast2504n = { ++ .name = "F@ST2504n", ++ .expected_cpu_id = 0x6362, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_hg253s_v2 = { ++ .name = "hg253s", ++ .expected_cpu_id = 0x6362, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [4] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .timing_sel = 1, ++ .name = "RGMII", ++ }, ++ ++ [5] = { ++ .used = 1, ++ .phy_id = 24, ++ .timing_sel = 1, ++ .name = "WAN", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_nb6 = { ++ .name = "NB6", ++ .expected_cpu_id = 0x6362, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [4] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++#endif /* CONFIG_BCM63XX_CPU_6362 */ ++ + /* + * all boards + */ +@@ -1865,6 +1976,12 @@ static const struct board_info __initcon + &board_nb4_fxc_r1, + &board_spw303v, + #endif /* CONFIG_BCM63XX_CPU_6358 */ ++#ifdef CONFIG_BCM63XX_CPU_6362 ++ &board_dgnd3700v2, ++ &board_fast2504n, ++ &board_hg253s_v2, ++ &board_nb6, ++#endif /* CONFIG_BCM63XX_CPU_6362 */ + }; + + static struct of_device_id const bcm963xx_boards_dt[] = { +@@ -1955,6 +2072,10 @@ static struct of_device_id const bcm963x + { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, + #endif /* CONFIG_BCM63XX_CPU_6358 */ + #ifdef CONFIG_BCM63XX_CPU_6362 ++ { .compatible = "huawei,hg253s-v2", .data = &board_hg253s_v2, }, ++ { .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, }, ++ { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, ++ { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + #ifdef CONFIG_BCM63XX_CPU_6368 + #endif /* CONFIG_BCM63XX_CPU_6368 */ diff --git a/target/linux/bcm63xx/patches-5.4/518-board_bcm6368.patch b/target/linux/bcm63xx/patches-5.4/518-board_bcm6368.patch new file mode 100644 index 0000000000..e745bf0848 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/518-board_bcm6368.patch @@ -0,0 +1,732 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -13,6 +13,8 @@ + #include + #include + #include ++#include ++#include + #include + #include + #include +@@ -1898,6 +1900,648 @@ static struct board_info __initdata boar + #endif /* CONFIG_BCM63XX_CPU_6362 */ + + /* ++ * known 6368 boards ++ */ ++#ifdef CONFIG_BCM63XX_CPU_6368 ++static struct board_info __initdata board_96368mvngr = { ++ .name = "96368MVNgr", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_96368mvwg = { ++ .name = "96368MVWG", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_usbd = 1, ++ .usbd = { ++ .use_fullspeed = 0, ++ .port_no = 0, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port1", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port2", ++ }, ++ [4] = { ++ .used = 1, ++ .phy_id = 0x12, ++ .name = "port0", ++ }, ++ [5] = { ++ .used = 1, ++ .phy_id = 0x11, ++ .name = "port3", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_AV4202N = { ++ .name = "96368_Swiss_S1", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4322, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_DGND3700v1_3800B = { ++ .name = "DGND3700v1_3800B", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [5] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++ ++static struct sprom_fixup __initdata EVG2000_fixups[] = { ++ { .offset = 219, .value = 0xec08 }, ++}; ++ ++static struct board_info __initdata board_EVG2000 = { ++ .name = "96369PVG", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [5] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4322, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = EVG2000_fixups, ++ .num_board_fixups = ARRAY_SIZE(EVG2000_fixups), ++ }, ++}; ++ ++static struct board_info __initdata board_HG622 = { ++ .name = "96368MVWG_hg622", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_RALINK, ++ .caldata_offset = 0xfa0000, ++ .slot = 1, ++ .eeprom = "rt2x00.eeprom", ++ }, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_HG655b = { ++ .name = "HW65x", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_caldata = 1, ++ .caldata = { ++ { ++ .vendor = PCI_VENDOR_ID_RALINK, ++ .caldata_offset = 0x7c0000, ++ .slot = 1, ++ .eeprom = "rt2x00.eeprom", ++ }, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_P870HW51A_V2 = { ++ .name = "P870HW-51a_v2", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM4318, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ }, ++}; ++ ++static struct board_info __initdata board_R1000H = { ++ .name = "R1000H", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [5] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++ ++static struct sprom_fixup __initdata vh4032n_fixups[] = { ++ { .offset = 2, .value = 0x04d2 }, ++ { .offset = 4, .value = 0x4350 }, ++ { .offset = 65, .value = 0x1300 }, ++ { .offset = 68, .value = 0x0402 }, ++ { .offset = 70, .value = 0x0090 }, ++ { .offset = 71, .value = 0x4c19 }, ++ { .offset = 72, .value = 0x2345 }, ++ { .offset = 87, .value = 0x0315 }, ++ { .offset = 88, .value = 0x0315 }, ++ { .offset = 96, .value = 0x2048 }, ++ { .offset = 97, .value = 0xfed7 }, ++ { .offset = 98, .value = 0x15a6 }, ++ { .offset = 99, .value = 0xfaee }, ++ { .offset = 100, .value = 0x3e3a }, ++ { .offset = 101, .value = 0x3a36 }, ++ { .offset = 102, .value = 0xff7f }, ++ { .offset = 103, .value = 0x11b9 }, ++ { .offset = 104, .value = 0xfc53 }, ++ { .offset = 105, .value = 0xffe6 }, ++ { .offset = 106, .value = 0xfdd2 }, ++ { .offset = 107, .value = 0xfe49 }, ++ { .offset = 108, .value = 0xff6a }, ++ { .offset = 109, .value = 0x136e }, ++ { .offset = 110, .value = 0xfbed }, ++ { .offset = 111, .value = 0x0000 }, ++ { .offset = 112, .value = 0x2048 }, ++ { .offset = 113, .value = 0xfee2 }, ++ { .offset = 114, .value = 0x15e5 }, ++ { .offset = 115, .value = 0xfaed }, ++ { .offset = 116, .value = 0x3e3a }, ++ { .offset = 117, .value = 0x3a36 }, ++ { .offset = 118, .value = 0xffc8 }, ++ { .offset = 119, .value = 0x12b8 }, ++ { .offset = 120, .value = 0xfca1 }, ++ { .offset = 121, .value = 0xff9b }, ++ { .offset = 122, .value = 0x122a }, ++ { .offset = 123, .value = 0xfcc8 }, ++ { .offset = 124, .value = 0xff95 }, ++ { .offset = 125, .value = 0x146b }, ++ { .offset = 126, .value = 0xfbba }, ++ { .offset = 127, .value = 0x0000 }, ++ { .offset = 161, .value = 0x0000 }, ++ { .offset = 162, .value = 0x0000 }, ++ { .offset = 169, .value = 0x0000 }, ++ { .offset = 170, .value = 0x0000 }, ++ { .offset = 171, .value = 0x0000 }, ++ { .offset = 172, .value = 0x0000 }, ++ { .offset = 173, .value = 0x0000 }, ++ { .offset = 174, .value = 0x0000 }, ++ { .offset = 175, .value = 0x0000 }, ++ { .offset = 176, .value = 0x0000 }, ++ { .offset = 219, .value = 0x1108 }, ++}; ++ ++static struct board_info __initdata board_VH4032N = { ++ .name = "VH4032N", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "LAN4", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43222, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = vh4032n_fixups, ++ .num_board_fixups = ARRAY_SIZE(vh4032n_fixups), ++ }, ++}; ++ ++static struct sprom_fixup __initdata vr3025u_fixups[] = { ++ { .offset = 97, .value = 0xfeb3 }, ++ { .offset = 98, .value = 0x1618 }, ++ { .offset = 99, .value = 0xfab0 }, ++ { .offset = 113, .value = 0xfed1 }, ++ { .offset = 114, .value = 0x1609 }, ++ { .offset = 115, .value = 0xfad9 }, ++}; ++ ++static struct board_info __initdata board_VR3025u = { ++ .name = "96368M-1541N", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43222, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = vr3025u_fixups, ++ .num_board_fixups = ARRAY_SIZE(vr3025u_fixups), ++ }, ++}; ++ ++static struct sprom_fixup __initdata vr3025un_fixups[] = { ++ { .offset = 97, .value = 0xfeb3 }, ++ { .offset = 98, .value = 0x1618 }, ++ { .offset = 99, .value = 0xfab0 }, ++ { .offset = 113, .value = 0xfed1 }, ++ { .offset = 114, .value = 0x1609 }, ++ { .offset = 115, .value = 0xfad9 }, ++}; ++ ++static struct board_info __initdata board_VR3025un = { ++ .name = "96368M-1341N", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43222, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = vr3025un_fixups, ++ .num_board_fixups = ARRAY_SIZE(vr3025un_fixups), ++ }, ++}; ++ ++static struct sprom_fixup __initdata vr3026e_fixups[] = { ++ { .offset = 97, .value = 0xfeb3 }, ++ { .offset = 98, .value = 0x1618 }, ++ { .offset = 99, .value = 0xfab0 }, ++ { .offset = 113, .value = 0xfed1 }, ++ { .offset = 114, .value = 0x1609 }, ++ { .offset = 115, .value = 0xfad9 }, ++}; ++ ++static struct board_info __initdata board_VR3026e = { ++ .name = "96368MT-1341N1", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43222, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = vr3026e_fixups, ++ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups), ++ }, ++}; ++ ++static struct sprom_fixup __initdata wap5813n_fixups[] = { ++ { .offset = 97, .value = 0xfeed }, ++ { .offset = 98, .value = 0x15d1 }, ++ { .offset = 99, .value = 0xfb0d }, ++ { .offset = 113, .value = 0xfef7 }, ++ { .offset = 114, .value = 0x15f7 }, ++ { .offset = 115, .value = 0xfb1a }, ++}; ++ ++static struct board_info __initdata board_WAP5813n = { ++ .name = "96369R-1231N", ++ .expected_cpu_id = 0x6368, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [4] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++ ++ .use_fallback_sprom = 1, ++ .fallback_sprom = { ++ .type = SPROM_BCM43222, ++ .pci_bus = 0, ++ .pci_dev = 1, ++ .board_fixups = wap5813n_fixups, ++ .num_board_fixups = ARRAY_SIZE(wap5813n_fixups), ++ }, ++}; ++#endif /* CONFIG_BCM63XX_CPU_6368 */ ++ ++/* + * all boards + */ + static const struct board_info __initconst *bcm963xx_boards[] = { +@@ -1982,6 +2626,22 @@ static const struct board_info __initcon + &board_hg253s_v2, + &board_nb6, + #endif /* CONFIG_BCM63XX_CPU_6362 */ ++#ifdef CONFIG_BCM63XX_CPU_6368 ++ &board_96368mvngr, ++ &board_96368mvwg, ++ &board_AV4202N, ++ &board_DGND3700v1_3800B, ++ &board_EVG2000, ++ &board_HG622, ++ &board_HG655b, ++ &board_P870HW51A_V2, ++ &board_R1000H, ++ &board_VH4032N, ++ &board_VR3025u, ++ &board_VR3025un, ++ &board_VR3026e, ++ &board_WAP5813n, ++#endif /* CONFIG_BCM63XX_CPU_6368 */ + }; + + static struct of_device_id const bcm963xx_boards_dt[] = { +@@ -2078,6 +2738,20 @@ static struct of_device_id const bcm963x + { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, + #endif /* CONFIG_BCM63XX_CPU_6362 */ + #ifdef CONFIG_BCM63XX_CPU_6368 ++ { .compatible = "actiontec,r1000h", .data = &board_R1000H, }, ++ { .compatible = "adb,av4202n", .data = &board_AV4202N, }, ++ { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, ++ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, ++ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, ++ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, ++ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, }, ++ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, ++ { .compatible = "huawei,echolife-hg622", .data = &board_HG622, }, ++ { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, ++ { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, ++ { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, ++ { .compatible = "observa,vh4032n", .data = &board_VH4032N, }, ++ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 + #endif /* CONFIG_BCM63XX_CPU_63268 */ +--- a/arch/mips/bcm63xx/boards/board_common.c ++++ b/arch/mips/bcm63xx/boards/board_common.c +@@ -81,12 +81,25 @@ void __init board_early_setup(const stru + bcm63xx_pci_enabled = 1; + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G2_PCI; ++ ++ if (BCMCPU_IS_6368()) ++ val |= GPIO_MODE_6368_PCI_REQ1 | ++ GPIO_MODE_6368_PCI_GNT1 | ++ GPIO_MODE_6368_PCI_INTB | ++ GPIO_MODE_6368_PCI_REQ0 | ++ GPIO_MODE_6368_PCI_GNT0; + } + #endif + + if (board.has_pccard) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G1_MII_PCCARD; ++ ++ if (BCMCPU_IS_6368()) ++ val |= GPIO_MODE_6368_PCMCIA_CD1 | ++ GPIO_MODE_6368_PCMCIA_CD2 | ++ GPIO_MODE_6368_PCMCIA_VS1 | ++ GPIO_MODE_6368_PCMCIA_VS2; + } + + if (board.has_enet0 && !board.enet0.use_internal_phy) { diff --git a/target/linux/bcm63xx/patches-5.4/519-board_bcm63268.patch b/target/linux/bcm63xx/patches-5.4/519-board_bcm63268.patch new file mode 100644 index 0000000000..2718bbdd36 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/519-board_bcm63268.patch @@ -0,0 +1,307 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2542,6 +2542,273 @@ static struct board_info __initdata boar + #endif /* CONFIG_BCM63XX_CPU_6368 */ + + /* ++ * known 63268/63269 boards ++ */ ++#ifdef CONFIG_BCM63XX_CPU_63268 ++static struct board_info __initdata board_963268bu_p300 = { ++ .name = "963268BU_P300", ++ .expected_cpu_id = 0x63268, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_usbd = 1, ++ .usbd = { ++ .use_fullspeed = 0, ++ .port_no = 0, ++ }, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 17, ++ .name = "FE1", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "GbE2", ++ }, ++ [4] = { ++ .used = 1, ++ .phy_id = 0, ++ .name = "GbE3", ++ .mii_override = 1, ++ .timing_sel = 1, ++ }, ++ [5] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "GbE1", ++ .mii_override = 1, ++ .timing_sel = 1, ++ }, ++ [6] = { ++ .used = 1, ++ .phy_id = 24, ++ .name = "GbE4", ++ .mii_override = 1, ++ .timing_sel = 1, ++ }, ++ [7] = { ++ .used = 1, ++ .phy_id = 25, ++ .name = "GbE5", ++ .mii_override = 1, ++ .timing_sel = 1, ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_963269bhr = { ++ .name = "963269BHR", ++ .expected_cpu_id = 0x63268, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "port1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "port2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "port3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "port4", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_BSKYB_63168 = { ++ .name = "BSKYB_63168", ++ .expected_cpu_id = 0x63268, ++ ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "Port 1", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "Port 2", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "Port 3", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "Port 4", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_H500s = { ++ .name = "BXK00C-1.6", ++ .expected_cpu_id = 0x63268, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [3] = { ++ .used = 1, ++ .phy_id = 12, ++ .name = "WAN", ++ }, ++ [4] = { ++ .used = 1, ++ .phy_id = 0, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .mii_override = 1, ++ .timing_sel = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_VG8050 = { ++ .name = "963169P-1861N5", ++ .expected_cpu_id = 0x63268, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 2, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [6] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .mii_override = 1, ++ .timing_sel = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_VR3032u = { ++ .name = "963168M-1841N1", ++ .expected_cpu_id = 0x63268, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "LAN2", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN4", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ }, ++ }, ++}; ++ ++static struct board_info __initdata board_vw6339gu = { ++ .name = "VW6339GU", ++ .expected_cpu_id = 0x63268, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "LAN2", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN4", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ [4] = { ++ .used = 1, ++ .phy_id = 7, ++ .name = "WAN", ++ .mii_override = 1, ++ .timing_sel = 1, ++ }, ++ }, ++ }, ++}; ++#endif /* CONFIG_BCM63XX_CPU_63268 */ ++ ++/* + * all boards + */ + static const struct board_info __initconst *bcm963xx_boards[] = { +@@ -2642,6 +2909,15 @@ static const struct board_info __initcon + &board_VR3026e, + &board_WAP5813n, + #endif /* CONFIG_BCM63XX_CPU_6368 */ ++#ifdef CONFIG_BCM63XX_CPU_63268 ++ &board_963268bu_p300, ++ &board_963269bhr, ++ &board_BSKYB_63168, ++ &board_H500s, ++ &board_VG8050, ++ &board_VR3032u, ++ &board_vw6339gu, ++#endif /* CONFIG_BCM63XX_CPU_63268 */ + }; + + static struct of_device_id const bcm963xx_boards_dt[] = { +@@ -2754,6 +3030,14 @@ static struct of_device_id const bcm963x + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, + #endif /* CONFIG_BCM63XX_CPU_6368 */ + #ifdef CONFIG_BCM63XX_CPU_63268 ++ { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, ++ { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, ++ { .compatible = "comtrend,vg-8050", .data = &board_VG8050, }, ++ { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, }, ++ { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, ++ { .compatible = "sercomm,h500-s-lowi", .data = &board_H500s, }, ++ { .compatible = "sercomm,h500-s-vfes", .data = &board_H500s, }, ++ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, + #endif /* CONFIG_BCM63XX_CPU_63268 */ + #endif /* CONFIG_OF */ + { }, diff --git a/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-96328avng-reference-board.patch deleted file mode 100644 index 43ad569e1e..0000000000 --- a/target/linux/bcm63xx/patches-5.4/521-MIPS-BCM63XX-add-96328avng-reference-board.patch +++ /dev/null @@ -1,44 +0,0 @@ -From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 May 2012 10:52:25 +0200 -Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 77 +++++++++++++++++++++++++++++ - 1 files changed, 77 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -321,6 +321,32 @@ static struct board_info __initdata boar - .use_fullspeed = 0, - .port_no = 0, - }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, - }; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - diff --git a/target/linux/bcm63xx/patches-5.4/522-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/bcm63xx/patches-5.4/522-MIPS-BCM63XX-add-963281TAN-reference-board.patch deleted file mode 100644 index a6f4a84336..0000000000 --- a/target/linux/bcm63xx/patches-5.4/522-MIPS-BCM63XX-add-963281TAN-reference-board.patch +++ /dev/null @@ -1,67 +0,0 @@ -From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 May 2012 11:01:12 +0200 -Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 71 +++++++++++++++++++++++++++++ - 1 files changed, 71 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -348,6 +348,39 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_963281TAN = { -+ .name = "963281TAN", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -702,6 +735,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_963281TAN, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -741,6 +775,7 @@ static struct of_device_id const bcm963x - { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch b/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch deleted file mode 100644 index 97f71e115a..0000000000 --- a/target/linux/bcm63xx/patches-5.4/523-board_bcm6328-d-link-dsl-274xb-f.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Mon, 30 Apr 2012 09:10:51 +0200 -Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link - DSL-274xB rev F1 - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 104 +++++++++++++++++++++++++++++ - 1 files changed, 104 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -381,6 +381,50 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_dsl_274xb_f1 = { -+ .name = "AW4339U", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_ATHEROS, -+ .caldata_offset = 0x7d1000, -+ .slot = 0, -+ .led_pin = -1, -+ .led_active_high = 1, -+ }, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 4", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 1", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -736,6 +780,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, - &board_963281TAN, -+ &board_dsl_274xb_f1, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -777,6 +822,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+ { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-5.4/524-board_bcm6328-adb-a4001n1.patch b/target/linux/bcm63xx/patches-5.4/524-board_bcm6328-adb-a4001n1.patch deleted file mode 100644 index 065f2df164..0000000000 --- a/target/linux/bcm63xx/patches-5.4/524-board_bcm6328-adb-a4001n1.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -382,6 +382,49 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_A4001N1 = { -+ .name = "963281T_TEF", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - static struct board_info __initdata board_dsl_274xb_f1 = { - .name = "AW4339U", - .expected_cpu_id = 0x6328, -@@ -780,6 +823,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, - &board_963281TAN, -+ &board_A4001N1, - &board_dsl_274xb_f1, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 -@@ -820,6 +864,7 @@ static struct of_device_id const bcm963x - { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, diff --git a/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch b/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch deleted file mode 100644 index 99a026f9d5..0000000000 --- a/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch +++ /dev/null @@ -1,97 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -349,6 +349,78 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ar5387un_fixups[] = { -+ { .offset = 2, .value = 0x05bb }, -+ { .offset = 65, .value = 0x1204 }, -+ { .offset = 78, .value = 0x0303 }, -+ { .offset = 79, .value = 0x0202 }, -+ { .offset = 80, .value = 0xff02 }, -+ { .offset = 87, .value = 0x0315 }, -+ { .offset = 88, .value = 0x0315 }, -+ { .offset = 96, .value = 0x2048 }, -+ { .offset = 97, .value = 0xff11 }, -+ { .offset = 98, .value = 0x1567 }, -+ { .offset = 99, .value = 0xfb24 }, -+ { .offset = 100, .value = 0x3e3c }, -+ { .offset = 101, .value = 0x4038 }, -+ { .offset = 102, .value = 0xfe7f }, -+ { .offset = 103, .value = 0x1279 }, -+ { .offset = 112, .value = 0x2048 }, -+ { .offset = 113, .value = 0xff03 }, -+ { .offset = 114, .value = 0x154c }, -+ { .offset = 115, .value = 0xfb27 }, -+ { .offset = 116, .value = 0x3e3c }, -+ { .offset = 117, .value = 0x4038 }, -+ { .offset = 118, .value = 0xfe87 }, -+ { .offset = 119, .value = 0x1233 }, -+ { .offset = 203, .value = 0x2226 }, -+}; -+ -+static struct board_info __initdata board_AR5387un = { -+ .name = "96328A-1441N1", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ar5387un_fixups, -+ .num_board_fixups = ARRAY_SIZE(ar5387un_fixups), -+ }, -+}; -+ - static struct board_info __initdata board_963281TAN = { - .name = "963281TAN", - .expected_cpu_id = 0x6328, -@@ -822,6 +894,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_AR5387un, - &board_963281TAN, - &board_A4001N1, - &board_dsl_274xb_f1, -@@ -867,6 +940,7 @@ static struct of_device_id const bcm963x - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+ { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-5.4/526-board_bcm6328-comtrend-ar-5381u.patch b/target/linux/bcm63xx/patches-5.4/526-board_bcm6328-comtrend-ar-5381u.patch deleted file mode 100644 index 8ed555490b..0000000000 --- a/target/linux/bcm63xx/patches-5.4/526-board_bcm6328-comtrend-ar-5381u.patch +++ /dev/null @@ -1,79 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -349,6 +349,60 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ar5381u_fixups[] = { -+ { .offset = 97, .value = 0xfee5 }, -+ { .offset = 98, .value = 0x157c }, -+ { .offset = 99, .value = 0xfae7 }, -+ { .offset = 113, .value = 0xfefa }, -+ { .offset = 114, .value = 0x15d6 }, -+ { .offset = 115, .value = 0xfaf8 }, -+}; -+ -+static struct board_info __initdata board_AR5381u = { -+ .name = "96328A-1241N", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ar5381u_fixups, -+ .num_board_fixups = ARRAY_SIZE(ar5381u_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata ar5387un_fixups[] = { - { .offset = 2, .value = 0x05bb }, - { .offset = 65, .value = 0x1204 }, -@@ -894,6 +948,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_AR5381u, - &board_AR5387un, - &board_963281TAN, - &board_A4001N1, -@@ -940,6 +995,7 @@ static struct of_device_id const bcm963x - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+ { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, - { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ diff --git a/target/linux/bcm63xx/patches-5.4/527-board_bcm6328-sagem-fast-2704-v2.patch b/target/linux/bcm63xx/patches-5.4/527-board_bcm6328-sagem-fast-2704-v2.patch deleted file mode 100644 index 4828c8e50c..0000000000 --- a/target/linux/bcm63xx/patches-5.4/527-board_bcm6328-sagem-fast-2704-v2.patch +++ /dev/null @@ -1,73 +0,0 @@ -From: Marcin Jurkowski -Date: Thu, 31 Oct 2013 22:33:10 +0000 -Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL - router - -This adds kernel support support for Sagemcom F@st 2704 wireless ADSL -router. -It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ -modem equipped with 64 MiB RAM and 8 MiB flash. - -Signed-off-by: Marcin Jurkowski ---- ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -594,6 +594,42 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_FAST2704V2 = { -+ .name = "F@ST2704V2", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .has_usbd = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -953,6 +989,7 @@ static const struct board_info __initcon - &board_963281TAN, - &board_A4001N1, - &board_dsl_274xb_f1, -+ &board_FAST2704V2, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -998,6 +1035,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, - { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, -+ { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-5.4/528-board_bcm6328-adb-a4001n.patch b/target/linux/bcm63xx/patches-5.4/528-board_bcm6328-adb-a4001n.patch deleted file mode 100644 index da2200652e..0000000000 --- a/target/linux/bcm63xx/patches-5.4/528-board_bcm6328-adb-a4001n.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -508,6 +508,49 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_A4001N = { -+ .name = "96328dg2x2", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - static struct board_info __initdata board_A4001N1 = { - .name = "963281T_TEF", - .expected_cpu_id = 0x6328, -@@ -987,6 +1030,7 @@ static const struct board_info __initcon - &board_AR5381u, - &board_AR5387un, - &board_963281TAN, -+ &board_A4001N, - &board_A4001N1, - &board_dsl_274xb_f1, - &board_FAST2704V2, -@@ -1029,6 +1073,7 @@ static struct of_device_id const bcm963x - { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "adb,a4001n", .data = &board_A4001N, }, - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-5.4/529-board_bcm6328-nucom-r5010un-v2.patch b/target/linux/bcm63xx/patches-5.4/529-board_bcm6328-nucom-r5010un-v2.patch deleted file mode 100644 index 4f63f23cda..0000000000 --- a/target/linux/bcm63xx/patches-5.4/529-board_bcm6328-nucom-r5010un-v2.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -673,6 +673,50 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_R5010UNV2 = { -+ .name = "96328ang", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -1034,6 +1078,7 @@ static const struct board_info __initcon - &board_A4001N1, - &board_dsl_274xb_f1, - &board_FAST2704V2, -+ &board_R5010UNV2, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -1080,6 +1125,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, - { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, -+ { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, }, - { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-5.4/530-board_bcm6328-sercomm-ad1018.patch b/target/linux/bcm63xx/patches-5.4/530-board_bcm6328-sercomm-ad1018.patch deleted file mode 100644 index 409f3d8e26..0000000000 --- a/target/linux/bcm63xx/patches-5.4/530-board_bcm6328-sercomm-ad1018.patch +++ /dev/null @@ -1,91 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -349,6 +349,71 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ad1018_fixups[] = { -+ { .offset = 6, .value = 0x1c00 }, -+ { .offset = 65, .value = 0x1256 }, -+ { .offset = 96, .value = 0x2046 }, -+ { .offset = 97, .value = 0xfe69 }, -+ { .offset = 98, .value = 0x1726 }, -+ { .offset = 99, .value = 0xfa5c }, -+ { .offset = 112, .value = 0x2046 }, -+ { .offset = 113, .value = 0xfea8 }, -+ { .offset = 114, .value = 0x1978 }, -+ { .offset = 115, .value = 0xfa26 }, -+ { .offset = 161, .value = 0x2222 }, -+ { .offset = 169, .value = 0x2222 }, -+ { .offset = 171, .value = 0x2222 }, -+ { .offset = 173, .value = 0x2222 }, -+ { .offset = 174, .value = 0x4444 }, -+ { .offset = 175, .value = 0x2222 }, -+ { .offset = 176, .value = 0x4444 }, -+}; -+ -+static struct board_info __initdata board_AD1018 = { -+ .name = "96328avngr", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "FIBRE", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ad1018_fixups, -+ .num_board_fixups = ARRAY_SIZE(ad1018_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata ar5381u_fixups[] = { - { .offset = 97, .value = 0xfee5 }, - { .offset = 98, .value = 0x157c }, -@@ -1071,6 +1136,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6318 */ - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_AD1018, - &board_AR5381u, - &board_AR5387un, - &board_963281TAN, -@@ -1127,6 +1193,8 @@ static struct of_device_id const bcm963x - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, }, - { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, -+ { .compatible = "sercomm,ad1018", .data = &board_AD1018, }, -+ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, }, - #endif /* CONFIG_BCM63XX_CPU_6328 */ - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-5.4/531-board-bcm6328-adb-pdg-a4001n-a-000-1a1-ax.patch b/target/linux/bcm63xx/patches-5.4/531-board-bcm6328-adb-pdg-a4001n-a-000-1a1-ax.patch deleted file mode 100644 index 3b08649bbc..0000000000 --- a/target/linux/bcm63xx/patches-5.4/531-board-bcm6328-adb-pdg-a4001n-a-000-1a1-ax.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -616,6 +616,49 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_PDG_A4001N_A_000_1A1_AX = { -+ .name = "96328avng", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - static struct board_info __initdata board_A4001N1 = { - .name = "963281T_TEF", - .expected_cpu_id = 0x6328, -@@ -1141,6 +1184,7 @@ static const struct board_info __initcon - &board_AR5387un, - &board_963281TAN, - &board_A4001N, -+ &board_PDG_A4001N_A_000_1A1_AX, - &board_A4001N1, - &board_dsl_274xb_f1, - &board_FAST2704V2, -@@ -1186,6 +1230,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "adb,a4001n", .data = &board_A4001N, }, - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, -+ { .compatible = "adb,pdg-a4001n-a-000-1a1-ax", .data = &board_PDG_A4001N_A_000_1A1_AX, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, - { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, diff --git a/target/linux/bcm63xx/patches-5.4/531-board_bcm6348-bt-voyager-2500v-bb.patch b/target/linux/bcm63xx/patches-5.4/531-board_bcm6348-bt-voyager-2500v-bb.patch new file mode 100644 index 0000000000..750deb6da0 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/531-board_bcm6348-bt-voyager-2500v-bb.patch @@ -0,0 +1,49 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -3066,6 +3066,22 @@ void __init board_bcm963xx_init(void) + val &= MPI_CSBASE_BASE_MASK; + } + boot_addr = (u8 *)KSEG1ADDR(val); ++ pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr); ++ ++ /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */ ++ /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/ ++ /* Loading firmware from the CFE Prompt always loads to Bank 0 */ ++ /* Do an early check of CFE and then select bank 0 */ ++ ++ if (boot_addr == (u8 *)0xbf800000) { ++ u8 *tmp_boot_addr = (u8*)0xbfc00000; ++ ++ bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET); ++ if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) { ++ pr_info("V2500V: nvram bank 0\n"); ++ boot_addr = tmp_boot_addr; ++ } ++ } + + /* dump cfe version */ + cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; +--- a/arch/mips/bcm63xx/dev-flash.c ++++ b/arch/mips/bcm63xx/dev-flash.c +@@ -21,6 +21,7 @@ + #include + #include + ++#include + #include + #include + #include +@@ -256,6 +257,13 @@ int __init bcm63xx_flash_register(void) + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + ++ /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */ ++ /* Loading from CFE always uses Bank 0 */ ++ if (!strcmp(board_get_name(), "V2500V_BB")) { ++ pr_info("V2500V: Start in Bank 0\n"); ++ val = val + 0x400000; // Select Bank 0 start address ++ } ++ + mtd_resources[0].start = val; + mtd_resources[0].end = 0x1FFFFFFF; + } diff --git a/target/linux/bcm63xx/patches-5.4/532-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/bcm63xx/patches-5.4/532-MIPS-BCM63XX-add-inventel-Livebox-support.patch new file mode 100644 index 0000000000..0035cee7e9 --- /dev/null +++ b/target/linux/bcm63xx/patches-5.4/532-MIPS-BCM63XX-add-inventel-Livebox-support.patch @@ -0,0 +1,214 @@ +From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Sun, 9 Mar 2014 04:55:52 +0100 +Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support + +--- + arch/mips/bcm63xx/boards/Kconfig | 6 + + arch/mips/bcm63xx/boards/Makefile | 1 + + arch/mips/bcm63xx/boards/board_common.c | 2 +- + arch/mips/bcm63xx/boards/board_common.h | 6 + + arch/mips/bcm63xx/boards/board_livebox.c | 215 ++++++++++++++++++++++++++++++ + 5 files changed, 229 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c + +--- a/arch/mips/bcm63xx/boards/Kconfig ++++ b/arch/mips/bcm63xx/boards/Kconfig +@@ -12,4 +12,10 @@ config BOARD_BCM963XX + select BCMA + default y + ++config BOARD_LIVEBOX ++ bool "Inventel Livebox(es) boards" ++ select SSB ++ help ++ Inventel Livebox boards using the RedBoot bootloader. ++ + endmenu +--- a/arch/mips/bcm63xx/boards/Makefile ++++ b/arch/mips/bcm63xx/boards/Makefile +@@ -1,3 +1,4 @@ + # SPDX-License-Identifier: GPL-2.0-only + obj-y += board_common.o + obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o ++obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o +--- a/arch/mips/bcm63xx/boards/board_common.c ++++ b/arch/mips/bcm63xx/boards/board_common.c +@@ -54,7 +54,7 @@ void __init board_prom_init(void) + if (fw_arg3 == CFE_EPTSEAL) + board_bcm963xx_init(); + else +- panic("unsupported bootloader detected"); ++ board_livebox_init(); + } + + static int (*board_get_mac_address)(u8 mac[ETH_ALEN]); +--- a/arch/mips/bcm63xx/boards/board_common.h ++++ b/arch/mips/bcm63xx/boards/board_common.h +@@ -24,4 +24,10 @@ static inline void board_of_device_prese + } + #endif + ++#if defined(CONFIG_BOARD_LIVEBOX) ++void board_livebox_init(void); ++#else ++static inline void board_livebox_init(void) { } ++#endif ++ + #endif /* __BOARD_COMMON_H */ +--- /dev/null ++++ b/arch/mips/bcm63xx/boards/board_livebox.c +@@ -0,0 +1,153 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2008 Florian Fainelli ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "board_common.h" ++ ++#define PFX "board_livebox: " ++ ++static unsigned int mac_addr_used = 0; ++ ++/* ++ * known 6348 boards ++ */ ++#ifdef CONFIG_BCM63XX_CPU_6348 ++static struct board_info __initdata board_livebox_blue5g = { ++ .name = "Livebox-blue-5g", ++ .expected_cpu_id = 0x6348, ++ ++ .has_pccard = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .ephy_reset_gpio = 6, ++ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, ++ ++ .has_enet0 = 1, ++ .enet0 = { ++ .has_phy = 1, ++ .use_internal_phy = 1, ++ }, ++ ++ .has_enet1 = 1, ++ .enet1 = { ++ .has_phy = 1, ++ .phy_id = 31, ++ }, ++}; ++#endif ++ ++/* ++ * all boards ++ */ ++static const struct board_info __initdata *bcm963xx_boards[] = { ++#ifdef CONFIG_BCM63XX_CPU_6348 ++ &board_livebox_blue5g ++#endif /* CONFIG_BCM63XX_CPU_6348 */ ++}; ++ ++static struct of_device_id const livebox_boards_dt[] = { ++ { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, }, ++ { } ++}; ++ ++/* ++ * register & return a new board mac address ++ */ ++static int livebox_get_mac_address(u8 *mac) ++{ ++ u8 *p; ++ int count; ++ ++ memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN); ++ ++ p = mac + ETH_ALEN - 1; ++ count = mac_addr_used; ++ ++ while (count--) { ++ do { ++ (*p)++; ++ if (*p != 0) ++ break; ++ p--; ++ } while (p != mac); ++ } ++ ++ if (p == mac) { ++ printk(KERN_ERR PFX "unable to fetch mac address\n"); ++ return -ENODEV; ++ } ++ mac_addr_used++; ++ ++ return 0; ++} ++ ++/* ++ * early init callback ++ */ ++#define LIVEBOX_GPIO_DETECT_MASK 0x000000ff ++#define LIVEBOX_BOOT_ADDR 0x1e400000 ++ ++#define LIVEBOX_HW_BLUE5G_9 0x90 ++ ++void __init board_livebox_init(void) ++{ ++ u32 val; ++ u8 hw_version; ++ const struct board_info *board; ++ const struct of_device_id *board_match; ++ ++ /* find board by compat */ ++ board_match = bcm63xx_match_board(livebox_boards_dt); ++ if (board_match) { ++ board = board_match->data; ++ } else { ++ /* Get hardware version */ ++ val = bcm_gpio_readl(GPIO_CTL_LO_REG); ++ val &= ~LIVEBOX_GPIO_DETECT_MASK; ++ bcm_gpio_writel(val, GPIO_CTL_LO_REG); ++ ++ hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG); ++ hw_version &= LIVEBOX_GPIO_DETECT_MASK; ++ ++ switch (hw_version) { ++ case LIVEBOX_HW_BLUE5G_9: ++ printk(KERN_INFO PFX "Livebox BLUE5G.9\n"); ++ board = bcm963xx_boards[0]; ++ break; ++ default: ++ printk(KERN_INFO PFX "Unknown livebox version: %02x\n", ++ hw_version); ++ /* use default livebox configuration */ ++ board = bcm963xx_boards[0]; ++ break; ++ } ++ } ++ ++ /* use default livebox configuration */ ++ board_early_setup(board, livebox_get_mac_address); ++ ++ /* read base address of boot chip select (0) */ ++ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); ++ val &= MPI_CSBASE_BASE_MASK; ++ if (val != LIVEBOX_BOOT_ADDR) { ++ printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n", ++ val, LIVEBOX_BOOT_ADDR); ++ bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff); ++ } ++} diff --git a/target/linux/bcm63xx/patches-5.4/541-board-bcm6338-d-link-dsl-2640u.patch b/target/linux/bcm63xx/patches-5.4/541-board-bcm6338-d-link-dsl-2640u.patch deleted file mode 100644 index 2c6a4950bb..0000000000 --- a/target/linux/bcm63xx/patches-5.4/541-board-bcm6338-d-link-dsl-2640u.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -858,6 +858,19 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct board_info __initdata board_96338w2_e7t = { -+ .name = "96338W2_E7T", -+ .expected_cpu_id = 0x6338, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6338 */ - - /* -@@ -1193,6 +1206,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, - &board_96338w, -+ &board_96338w2_e7t, - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -@@ -1244,6 +1258,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, - { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, -+ { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, }, - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 - { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, diff --git a/target/linux/bcm63xx/patches-5.4/542-board_bcm6338-dynalink-rta1320.patch b/target/linux/bcm63xx/patches-5.4/542-board_bcm6338-dynalink-rta1320.patch deleted file mode 100644 index d3b048a6ac..0000000000 --- a/target/linux/bcm63xx/patches-5.4/542-board_bcm6338-dynalink-rta1320.patch +++ /dev/null @@ -1,38 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -871,6 +871,19 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct board_info __initdata board_rta1320_16m = { -+ .name = "RTA1320_16M", -+ .expected_cpu_id = 0x6338, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6338 */ - - /* -@@ -1207,6 +1220,7 @@ static const struct board_info __initcon - &board_96338gw, - &board_96338w, - &board_96338w2_e7t, -+ &board_rta1320_16m, - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -@@ -1258,6 +1272,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, - { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, -+ { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, }, - { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, }, - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 diff --git a/target/linux/bcm63xx/patches-5.4/551-board_bcm6345-dynalink-rta770bw-rta770w.patch b/target/linux/bcm63xx/patches-5.4/551-board_bcm6345-dynalink-rta770bw-rta770w.patch deleted file mode 100644 index 225c754924..0000000000 --- a/target/linux/bcm63xx/patches-5.4/551-board_bcm6345-dynalink-rta770bw-rta770w.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -894,6 +894,19 @@ static struct board_info __initdata boar - .name = "96345GW2", - .expected_cpu_id = 0x6345, - }; -+ -+static struct board_info __initdata board_rta770w = { -+ .name = "RTA770BW", -+ .expected_cpu_id = 0x6345, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6345 */ - - /* -@@ -1224,6 +1237,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -+ &board_rta770w, - #endif /* CONFIG_BCM63XX_CPU_6345 */ - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, -@@ -1277,6 +1291,8 @@ static struct of_device_id const bcm963x - #endif /* CONFIG_BCM63XX_CPU_6338 */ - #ifdef CONFIG_BCM63XX_CPU_6345 - { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, -+ { .compatible = "dynalink,rta770bw", .data = &board_rta770w, }, -+ { .compatible = "dynalink,rta770w", .data = &board_rta770w, }, - #endif /* CONFIG_BCM63XX_CPU_6345 */ - #ifdef CONFIG_BCM63XX_CPU_6348 - { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-5.4/561-board-bcm6348-D4PW.patch b/target/linux/bcm63xx/patches-5.4/561-board-bcm6348-D4PW.patch deleted file mode 100644 index 62e8f381c1..0000000000 --- a/target/linux/bcm63xx/patches-5.4/561-board-bcm6348-D4PW.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1093,6 +1093,21 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; -+ -+static struct board_info __initdata board_96348_D4PW = { -+ .name = "D-4P-W", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -1248,6 +1263,7 @@ static const struct board_info __initcon - &board_DV201AMR, - &board_96348gw_a, - &board_rta1025w_16, -+ &board_96348_D4PW, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1300,6 +1316,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-5.4/562-board_bcm6348-t-com-speedport-w-500v.patch b/target/linux/bcm63xx/patches-5.4/562-board_bcm6348-t-com-speedport-w-500v.patch deleted file mode 100644 index a20047d3d3..0000000000 --- a/target/linux/bcm63xx/patches-5.4/562-board_bcm6348-t-com-speedport-w-500v.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1108,6 +1108,36 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct sprom_fixup __initdata spw500v_fixups[] = { -+ { .offset = 46, .value = 0x3046 }, -+ { .offset = 47, .value = 0x15a7 }, -+ { .offset = 48, .value = 0xfa89 }, -+ { .offset = 49, .value = 0xfe79 }, -+ { .offset = 57, .value = 0x6a49 }, -+}; -+ -+static struct board_info __initdata board_spw500v = { -+ .name = "SPW500V", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = spw500v_fixups, -+ .num_board_fixups = ARRAY_SIZE(spw500v_fixups), -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -1264,6 +1294,7 @@ static const struct board_info __initcon - &board_96348gw_a, - &board_rta1025w_16, - &board_96348_D4PW, -+ &board_spw500v, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1321,6 +1352,7 @@ static struct of_device_id const bcm963x - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, -+ { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, - #endif /* CONFIG_BCM63XX_CPU_6348 */ diff --git a/target/linux/bcm63xx/patches-5.4/563-board_bcm6348-tecom-gw6000-gw6200.patch b/target/linux/bcm63xx/patches-5.4/563-board_bcm6348-tecom-gw6000-gw6200.patch deleted file mode 100644 index 3d9c000803..0000000000 --- a/target/linux/bcm63xx/patches-5.4/563-board_bcm6348-tecom-gw6000-gw6200.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1002,6 +1002,46 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - }; - -+static struct board_info __initdata board_gw6200 = { -+ .name = "GW6200", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ -+static struct board_info __initdata board_gw6000 = { -+ .name = "GW6000", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_FAST2404 = { - .name = "F@ST2404", - .expected_cpu_id = 0x6348, -@@ -1287,6 +1327,8 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, - &board_96348gw, -+ &board_gw6000, -+ &board_gw6200, - &board_96348gw_10, - &board_96348gw_11, - &board_FAST2404, -@@ -1353,6 +1395,8 @@ static struct of_device_id const bcm963x - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, -+ { .compatible = "tecom,gw6000", .data = &board_gw6000, }, -+ { .compatible = "tecom,gw6200", .data = &board_gw6200, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, - #endif /* CONFIG_BCM63XX_CPU_6348 */ diff --git a/target/linux/bcm63xx/patches-5.4/564-board-bcm6348-telsey-magic.patch b/target/linux/bcm63xx/patches-5.4/564-board-bcm6348-telsey-magic.patch deleted file mode 100644 index ba9ee0b4d4..0000000000 --- a/target/linux/bcm63xx/patches-5.4/564-board-bcm6348-telsey-magic.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1178,6 +1178,30 @@ static struct board_info __initdata boar - .num_board_fixups = ARRAY_SIZE(spw500v_fixups), - }, - }; -+ -+static struct board_info __initdata board_96348sv = { -+ .name = "MAGIC", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ /* it has BP_ENET_EXTERNAL_PHY */ -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -1337,6 +1361,7 @@ static const struct board_info __initcon - &board_rta1025w_16, - &board_96348_D4PW, - &board_spw500v, -+ &board_96348sv, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1397,6 +1422,7 @@ static struct of_device_id const bcm963x - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, - { .compatible = "tecom,gw6200", .data = &board_gw6200, }, -+ { .compatible = "telsey,magic", .data = &board_96348sv, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, - #endif /* CONFIG_BCM63XX_CPU_6348 */ diff --git a/target/linux/bcm63xx/patches-5.4/565-board_bcm6348-bt-voyager-2500v-bb.patch b/target/linux/bcm63xx/patches-5.4/565-board_bcm6348-bt-voyager-2500v-bb.patch deleted file mode 100644 index 6536e17798..0000000000 --- a/target/linux/bcm63xx/patches-5.4/565-board_bcm6348-bt-voyager-2500v-bb.patch +++ /dev/null @@ -1,93 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1202,6 +1202,27 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct board_info __initdata board_V2500V_BB = { -+ .name = "V2500V_BB", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -1362,6 +1383,7 @@ static const struct board_info __initcon - &board_96348_D4PW, - &board_spw500v, - &board_96348sv, -+ &board_V2500V_BB, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1414,6 +1436,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, -@@ -1469,6 +1492,22 @@ void __init board_bcm963xx_init(void) - val &= MPI_CSBASE_BASE_MASK; - } - boot_addr = (u8 *)KSEG1ADDR(val); -+ pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr); -+ -+ /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */ -+ /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/ -+ /* Loading firmware from the CFE Prompt always loads to Bank 0 */ -+ /* Do an early check of CFE and then select bank 0 */ -+ -+ if (boot_addr == (u8 *)0xbf800000) { -+ u8 *tmp_boot_addr = (u8*)0xbfc00000; -+ -+ bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET); -+ if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) { -+ pr_info("V2500V: nvram bank 0\n"); -+ boot_addr = tmp_boot_addr; -+ } -+ } - - /* dump cfe version */ - cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -21,6 +21,7 @@ - #include - #include - -+#include - #include - #include - #include -@@ -256,6 +257,13 @@ int __init bcm63xx_flash_register(void) - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - -+ /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */ -+ /* Loading from CFE always uses Bank 0 */ -+ if (!strcmp(board_get_name(), "V2500V_BB")) { -+ pr_info("V2500V: Start in Bank 0\n"); -+ val = val + 0x400000; // Select Bank 0 start address -+ } -+ - mtd_resources[0].start = val; - mtd_resources[0].end = 0x1FFFFFFF; - } diff --git a/target/linux/bcm63xx/patches-5.4/566-board_bcm6348-bt-voyager-2110.patch b/target/linux/bcm63xx/patches-5.4/566-board_bcm6348-bt-voyager-2110.patch deleted file mode 100644 index c51b28854b..0000000000 --- a/target/linux/bcm63xx/patches-5.4/566-board_bcm6348-bt-voyager-2110.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -979,6 +979,22 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+/* BT Voyager 2110 */ -+static struct board_info __initdata board_V2110 = { -+ .name = "V2110", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -1384,6 +1400,7 @@ static const struct board_info __initcon - &board_spw500v, - &board_96348sv, - &board_V2500V_BB, -+ &board_V2110, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1436,6 +1453,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "bt,voyager-2110", .data = &board_V2110, }, - { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, diff --git a/target/linux/bcm63xx/patches-5.4/567-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/bcm63xx/patches-5.4/567-MIPS-BCM63XX-add-inventel-Livebox-support.patch deleted file mode 100644 index 0035cee7e9..0000000000 --- a/target/linux/bcm63xx/patches-5.4/567-MIPS-BCM63XX-add-inventel-Livebox-support.patch +++ /dev/null @@ -1,214 +0,0 @@ -From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 9 Mar 2014 04:55:52 +0100 -Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support - ---- - arch/mips/bcm63xx/boards/Kconfig | 6 + - arch/mips/bcm63xx/boards/Makefile | 1 + - arch/mips/bcm63xx/boards/board_common.c | 2 +- - arch/mips/bcm63xx/boards/board_common.h | 6 + - arch/mips/bcm63xx/boards/board_livebox.c | 215 ++++++++++++++++++++++++++++++ - 5 files changed, 229 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c - ---- a/arch/mips/bcm63xx/boards/Kconfig -+++ b/arch/mips/bcm63xx/boards/Kconfig -@@ -12,4 +12,10 @@ config BOARD_BCM963XX - select BCMA - default y - -+config BOARD_LIVEBOX -+ bool "Inventel Livebox(es) boards" -+ select SSB -+ help -+ Inventel Livebox boards using the RedBoot bootloader. -+ - endmenu ---- a/arch/mips/bcm63xx/boards/Makefile -+++ b/arch/mips/bcm63xx/boards/Makefile -@@ -1,3 +1,4 @@ - # SPDX-License-Identifier: GPL-2.0-only - obj-y += board_common.o - obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o -+obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -54,7 +54,7 @@ void __init board_prom_init(void) - if (fw_arg3 == CFE_EPTSEAL) - board_bcm963xx_init(); - else -- panic("unsupported bootloader detected"); -+ board_livebox_init(); - } - - static int (*board_get_mac_address)(u8 mac[ETH_ALEN]); ---- a/arch/mips/bcm63xx/boards/board_common.h -+++ b/arch/mips/bcm63xx/boards/board_common.h -@@ -24,4 +24,10 @@ static inline void board_of_device_prese - } - #endif - -+#if defined(CONFIG_BOARD_LIVEBOX) -+void board_livebox_init(void); -+#else -+static inline void board_livebox_init(void) { } -+#endif -+ - #endif /* __BOARD_COMMON_H */ ---- /dev/null -+++ b/arch/mips/bcm63xx/boards/board_livebox.c -@@ -0,0 +1,153 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Florian Fainelli -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "board_common.h" -+ -+#define PFX "board_livebox: " -+ -+static unsigned int mac_addr_used = 0; -+ -+/* -+ * known 6348 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6348 -+static struct board_info __initdata board_livebox_blue5g = { -+ .name = "Livebox-blue-5g", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .ephy_reset_gpio = 6, -+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 31, -+ }, -+}; -+#endif -+ -+/* -+ * all boards -+ */ -+static const struct board_info __initdata *bcm963xx_boards[] = { -+#ifdef CONFIG_BCM63XX_CPU_6348 -+ &board_livebox_blue5g -+#endif /* CONFIG_BCM63XX_CPU_6348 */ -+}; -+ -+static struct of_device_id const livebox_boards_dt[] = { -+ { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, }, -+ { } -+}; -+ -+/* -+ * register & return a new board mac address -+ */ -+static int livebox_get_mac_address(u8 *mac) -+{ -+ u8 *p; -+ int count; -+ -+ memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN); -+ -+ p = mac + ETH_ALEN - 1; -+ count = mac_addr_used; -+ -+ while (count--) { -+ do { -+ (*p)++; -+ if (*p != 0) -+ break; -+ p--; -+ } while (p != mac); -+ } -+ -+ if (p == mac) { -+ printk(KERN_ERR PFX "unable to fetch mac address\n"); -+ return -ENODEV; -+ } -+ mac_addr_used++; -+ -+ return 0; -+} -+ -+/* -+ * early init callback -+ */ -+#define LIVEBOX_GPIO_DETECT_MASK 0x000000ff -+#define LIVEBOX_BOOT_ADDR 0x1e400000 -+ -+#define LIVEBOX_HW_BLUE5G_9 0x90 -+ -+void __init board_livebox_init(void) -+{ -+ u32 val; -+ u8 hw_version; -+ const struct board_info *board; -+ const struct of_device_id *board_match; -+ -+ /* find board by compat */ -+ board_match = bcm63xx_match_board(livebox_boards_dt); -+ if (board_match) { -+ board = board_match->data; -+ } else { -+ /* Get hardware version */ -+ val = bcm_gpio_readl(GPIO_CTL_LO_REG); -+ val &= ~LIVEBOX_GPIO_DETECT_MASK; -+ bcm_gpio_writel(val, GPIO_CTL_LO_REG); -+ -+ hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG); -+ hw_version &= LIVEBOX_GPIO_DETECT_MASK; -+ -+ switch (hw_version) { -+ case LIVEBOX_HW_BLUE5G_9: -+ printk(KERN_INFO PFX "Livebox BLUE5G.9\n"); -+ board = bcm963xx_boards[0]; -+ break; -+ default: -+ printk(KERN_INFO PFX "Unknown livebox version: %02x\n", -+ hw_version); -+ /* use default livebox configuration */ -+ board = bcm963xx_boards[0]; -+ break; -+ } -+ } -+ -+ /* use default livebox configuration */ -+ board_early_setup(board, livebox_get_mac_address); -+ -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ if (val != LIVEBOX_BOOT_ADDR) { -+ printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n", -+ val, LIVEBOX_BOOT_ADDR); -+ bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff); -+ } -+} diff --git a/target/linux/bcm63xx/patches-5.4/568-board_bcm6348-comtrend-ct-536plus-ct-5621.patch b/target/linux/bcm63xx/patches-5.4/568-board_bcm6348-comtrend-ct-536plus-ct-5621.patch deleted file mode 100644 index c815e66f1d..0000000000 --- a/target/linux/bcm63xx/patches-5.4/568-board_bcm6348-comtrend-ct-536plus-ct-5621.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -995,6 +995,30 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_ct536_ct5621 = { -+ .name = "CT536_CT5621", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -1401,6 +1425,7 @@ static const struct board_info __initcon - &board_96348sv, - &board_V2500V_BB, - &board_V2110, -+ &board_ct536_ct5621, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1455,6 +1480,8 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, - { .compatible = "bt,voyager-2110", .data = &board_V2110, }, - { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, -+ { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, }, -+ { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, diff --git a/target/linux/bcm63xx/patches-5.4/569-board_bcm6348-comtrend-ct-5365.patch b/target/linux/bcm63xx/patches-5.4/569-board_bcm6348-comtrend-ct-5365.patch deleted file mode 100644 index 7dbfb825fa..0000000000 --- a/target/linux/bcm63xx/patches-5.4/569-board_bcm6348-comtrend-ct-5365.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1019,6 +1019,29 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_96348A_122 = { -+ .name = "96348A-122", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -1426,6 +1449,7 @@ static const struct board_info __initcon - &board_V2500V_BB, - &board_V2110, - &board_ct536_ct5621, -+ &board_96348A_122, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1481,6 +1505,7 @@ static struct of_device_id const bcm963x - { .compatible = "bt,voyager-2110", .data = &board_V2110, }, - { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, - { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, }, -+ { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, }, - { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, diff --git a/target/linux/bcm63xx/patches-5.4/570-board_bcm6348-telsey-cpva502plus.patch b/target/linux/bcm63xx/patches-5.4/570-board_bcm6348-telsey-cpva502plus.patch deleted file mode 100644 index dc028609be..0000000000 --- a/target/linux/bcm63xx/patches-5.4/570-board_bcm6348-telsey-cpva502plus.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -995,6 +995,34 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_CPVA502plus = { -+ .name = "CPVA502+", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .ephy_reset_gpio = 4, -+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_ct536_ct5621 = { - .name = "CT536_CT5621", - .expected_cpu_id = 0x6348, -@@ -1450,6 +1478,7 @@ static const struct board_info __initcon - &board_V2110, - &board_ct536_ct5621, - &board_96348A_122, -+ &board_CPVA502plus, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1515,6 +1544,7 @@ static struct of_device_id const bcm963x - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, - { .compatible = "tecom,gw6200", .data = &board_gw6200, }, -+ { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, }, - { .compatible = "telsey,magic", .data = &board_96348sv, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, diff --git a/target/linux/bcm63xx/patches-5.4/571-board_bcm6348-netgear-dg834g-v4.patch b/target/linux/bcm63xx/patches-5.4/571-board_bcm6348-netgear-dg834g-v4.patch deleted file mode 100644 index d68f690578..0000000000 --- a/target/linux/bcm63xx/patches-5.4/571-board_bcm6348-netgear-dg834g-v4.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1225,6 +1225,23 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - }; - -+/* NetGear DG834G v4 */ -+static struct board_info __initdata board_96348W3 = { -+ .name = "96348W3", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96348_D4PW = { - .name = "D-4P-W", - .expected_cpu_id = 0x6348, -@@ -1479,6 +1496,7 @@ static const struct board_info __initcon - &board_ct536_ct5621, - &board_96348A_122, - &board_CPVA502plus, -+ &board_96348W3, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1540,6 +1558,7 @@ static struct of_device_id const bcm963x - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, -+ { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, diff --git a/target/linux/bcm63xx/patches-5.4/572-board_bcm6348-sagem-fast-2604.patch b/target/linux/bcm63xx/patches-5.4/572-board_bcm6348-sagem-fast-2604.patch deleted file mode 100644 index 21b10da89f..0000000000 --- a/target/linux/bcm63xx/patches-5.4/572-board_bcm6348-sagem-fast-2604.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1159,6 +1159,22 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+static struct board_info __initdata board_FAST2604 = { -+ .name = "F@ST2604", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_rta1025w_16 = { - .name = "RTA1025W_16", - .expected_cpu_id = 0x6348, -@@ -1485,6 +1501,7 @@ static const struct board_info __initcon - &board_96348gw_10, - &board_96348gw_11, - &board_FAST2404, -+ &board_FAST2604, - &board_DV201AMR, - &board_96348gw_a, - &board_rta1025w_16, -@@ -1560,6 +1577,7 @@ static struct of_device_id const bcm963x - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, - { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, -+ { .compatible = "sagem,fast-2604", .data = &board_FAST2604, }, - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, - { .compatible = "tecom,gw6200", .data = &board_gw6200, }, diff --git a/target/linux/bcm63xx/patches-5.4/573-board_bcm6348-asmax-ar-1004g.patch b/target/linux/bcm63xx/patches-5.4/573-board_bcm6348-asmax-ar-1004g.patch deleted file mode 100644 index a1eeee3b22..0000000000 --- a/target/linux/bcm63xx/patches-5.4/573-board_bcm6348-asmax-ar-1004g.patch +++ /dev/null @@ -1,48 +0,0 @@ -From: "mexit@o2.pl" -Date: Sun, 24 Nov 2013 21:33:38 +0000 -Subject: [PATCH 4/5] bcm63xx: add support for Asmax AR 1004g router - -Support for Asmax AR 1004g router - -Signed-off-by: Adrian Feliks ---- ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -979,6 +979,21 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+static struct board_info __initdata board_96348gw_10_AR1004G = { -+ .name = "AR1004G", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - /* BT Voyager 2110 */ - static struct board_info __initdata board_V2110 = { - .name = "V2110", -@@ -1514,6 +1529,7 @@ static const struct board_info __initcon - &board_96348A_122, - &board_CPVA502plus, - &board_96348W3, -+ &board_96348gw_10_AR1004G, - #endif /* CONFIG_BCM63XX_CPU_6348 */ - #ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, -@@ -1561,6 +1577,7 @@ static struct of_device_id const bcm963x - { .compatible = "dynalink,rta770w", .data = &board_rta770w, }, - #endif /* CONFIG_BCM63XX_CPU_6345 */ - #ifdef CONFIG_BCM63XX_CPU_6348 -+ { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, }, - { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348r", .data = &board_96348r, }, - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-5.4/601-board-bcm6358-DWV-S0_fixes.patch b/target/linux/bcm63xx/patches-5.4/601-board-bcm6358-DWV-S0_fixes.patch deleted file mode 100644 index fa35102aa0..0000000000 --- a/target/linux/bcm63xx/patches-5.4/601-board-bcm6358-DWV-S0_fixes.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1468,6 +1468,7 @@ static struct board_info __initdata boar - }, - - .has_ohci0 = 1, -+ .has_ehci0 = 1, - }; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - diff --git a/target/linux/bcm63xx/patches-5.4/602-board-bcm6358-sfr-neufbox-4.patch b/target/linux/bcm63xx/patches-5.4/602-board-bcm6358-sfr-neufbox-4.patch deleted file mode 100644 index bb5ce6f840..0000000000 --- a/target/linux/bcm63xx/patches-5.4/602-board-bcm6358-sfr-neufbox-4.patch +++ /dev/null @@ -1,77 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1470,6 +1470,56 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - .has_ehci0 = 1, - }; -+ -+static struct board_info __initdata board_nb4_ser_r0 = { -+ .name = "NB4-SER-r0", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ -+static struct board_info __initdata board_nb4_fxc_r1 = { -+ .name = "NB4-FXC-r1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -1537,6 +1587,8 @@ static const struct board_info __initcon - &board_96358vw2, - &board_AGPFS0, - &board_DWVS0, -+ &board_nb4_ser_r0, -+ &board_nb4_fxc_r1, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - }; - -@@ -1613,6 +1665,8 @@ static struct of_device_id const bcm963x - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, - { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, -+ { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, -+ { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 - #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/603-board-bcm6358-telsey-cpva642.patch b/target/linux/bcm63xx/patches-5.4/603-board-bcm6358-telsey-cpva642.patch deleted file mode 100644 index be860fa722..0000000000 --- a/target/linux/bcm63xx/patches-5.4/603-board-bcm6358-telsey-cpva642.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1422,6 +1422,23 @@ static struct board_info __initdata boar - .num_usbh_ports = 2, - }; - -+static struct board_info __initdata board_CPVA642 = { -+ .name = "CPVA642", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_AGPFS0 = { - .name = "AGPF-S0", - .expected_cpu_id = 0x6358, -@@ -1586,6 +1603,7 @@ static const struct board_info __initcon - &board_96358vw, - &board_96358vw2, - &board_AGPFS0, -+ &board_CPVA642, - &board_DWVS0, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, -@@ -1667,6 +1685,7 @@ static struct of_device_id const bcm963x - { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, - { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, - { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, -+ { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 - #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/604-board_bcm6358-d-link-dsl-274xb-c.patch b/target/linux/bcm63xx/patches-5.4/604-board_bcm6358-d-link-dsl-274xb-c.patch deleted file mode 100644 index 3fb9940e78..0000000000 --- a/target/linux/bcm63xx/patches-5.4/604-board_bcm6358-d-link-dsl-274xb-c.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1488,6 +1488,22 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+/* D-Link DSL-274xB revison C2/C3 */ -+static struct board_info __initdata board_dsl_274xb_rev_c = { -+ .name = "AW4139", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_nb4_ser_r0 = { - .name = "NB4-SER-r0", - .expected_cpu_id = 0x6358, -@@ -1605,6 +1621,7 @@ static const struct board_info __initcon - &board_AGPFS0, - &board_CPVA642, - &board_DWVS0, -+ &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - #endif /* CONFIG_BCM63XX_CPU_6358 */ -@@ -1678,6 +1695,7 @@ static struct of_device_id const bcm963x - { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, - { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, - { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, -+ { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/605-board_bcm6358-huawei-echolife-hg553.patch b/target/linux/bcm63xx/patches-5.4/605-board_bcm6358-huawei-echolife-hg553.patch deleted file mode 100644 index e5eb2ff8e2..0000000000 --- a/target/linux/bcm63xx/patches-5.4/605-board_bcm6358-huawei-echolife-hg553.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1553,6 +1553,31 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct board_info __initdata board_HW553 = { -+ .name = "HW553", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -1624,6 +1649,7 @@ static const struct board_info __initcon - &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, -+ &board_HW553, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - }; - -@@ -1697,6 +1723,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, -+ { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/606-board_bcm6358-t-com-speedport-w-303v.patch b/target/linux/bcm63xx/patches-5.4/606-board_bcm6358-t-com-speedport-w-303v.patch deleted file mode 100644 index 114e55a14d..0000000000 --- a/target/linux/bcm63xx/patches-5.4/606-board_bcm6358-t-com-speedport-w-303v.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1578,6 +1578,20 @@ static struct board_info __initdata boar - .pci_dev = 1, - }, - }; -+ -+ /* T-Home Speedport W 303V Typ B */ -+static struct board_info __initdata board_spw303v = { -+ .name = "96358-502V", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -1650,6 +1664,7 @@ static const struct board_info __initcon - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - &board_HW553, -+ &board_spw303v, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - }; - -@@ -1730,6 +1745,7 @@ static struct of_device_id const bcm963x - { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, - { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, - { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, -+ { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, }, - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 diff --git a/target/linux/bcm63xx/patches-5.4/607-board_bcm6358-comtrend-ct-6373.patch b/target/linux/bcm63xx/patches-5.4/607-board_bcm6358-comtrend-ct-6373.patch deleted file mode 100644 index 4c0ff79067..0000000000 --- a/target/linux/bcm63xx/patches-5.4/607-board_bcm6358-comtrend-ct-6373.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1554,6 +1554,30 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_ct6373_1 = { -+ .name = "CT6373-1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_HW553 = { - .name = "HW553", - .expected_cpu_id = 0x6358, -@@ -1663,6 +1687,7 @@ static const struct board_info __initcon - &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, -+ &board_ct6373_1, - &board_HW553, - &board_spw303v, - #endif /* CONFIG_BCM63XX_CPU_6358 */ -@@ -1736,6 +1761,7 @@ static struct of_device_id const bcm963x - { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, - { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, - { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, -+ { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, }, - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, diff --git a/target/linux/bcm63xx/patches-5.4/608-board_bcm6358-d-link-dva-g3810bn-tl.patch b/target/linux/bcm63xx/patches-5.4/608-board_bcm6358-d-link-dva-g3810bn-tl.patch deleted file mode 100644 index a106ab8447..0000000000 --- a/target/linux/bcm63xx/patches-5.4/608-board_bcm6358-d-link-dva-g3810bn-tl.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1616,6 +1616,31 @@ static struct board_info __initdata boar - .use_internal_phy = 1, - }, - }; -+ -+/* D-Link DVA-G3810BN/TL */ -+static struct board_info __initdata board_DVAG3810BN = { -+ .name = "DVAG3810BN", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pccard = 1, -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -1690,6 +1715,7 @@ static const struct board_info __initcon - &board_ct6373_1, - &board_HW553, - &board_spw303v, -+ &board_DVAG3810BN, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - }; - -@@ -1764,6 +1790,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, }, - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, -+ { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/609-board_bcm6358-huawei-echolife-hg556.patch b/target/linux/bcm63xx/patches-5.4/609-board_bcm6358-huawei-echolife-hg556.patch deleted file mode 100644 index d05e6ca985..0000000000 --- a/target/linux/bcm63xx/patches-5.4/609-board_bcm6358-huawei-echolife-hg556.patch +++ /dev/null @@ -1,125 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -12,6 +12,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -1603,6 +1604,94 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HW556_A = { -+ .name = "HW556_A", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_ATHEROS, -+ .caldata_offset = 0xf7e000, -+ .slot = 1, -+ .endian_check = 1, -+ .led_pin = 2, -+ .led_active_high = 1, -+ }, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ -+static struct board_info __initdata board_HW556_B = { -+ .name = "HW556_B", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_ATHEROS, -+ .caldata_offset = 0xefe000, -+ .slot = 1, -+ .endian_check = 1, -+ .led_pin = 2, -+ .led_active_high = 1, -+ }, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ -+static struct board_info __initdata board_HW556_C = { -+ .name = "HW556_C", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_RALINK, -+ .caldata_offset = 0xeffe00, -+ .slot = 1, -+ .eeprom = "rt2x00.eeprom", -+ }, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - /* T-Home Speedport W 303V Typ B */ - static struct board_info __initdata board_spw303v = { - .name = "96358-502V", -@@ -1714,6 +1803,9 @@ static const struct board_info __initcon - &board_nb4_fxc_r1, - &board_ct6373_1, - &board_HW553, -+ &board_HW556_A, -+ &board_HW556_B, -+ &board_HW556_C, - &board_spw303v, - &board_DVAG3810BN, - #endif /* CONFIG_BCM63XX_CPU_6358 */ -@@ -1792,6 +1884,9 @@ static struct of_device_id const bcm963x - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, -+ { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, }, -+ { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, }, -+ { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-5.4/610-board_bcm6359-huawei-echolife-hg520v.patch b/target/linux/bcm63xx/patches-5.4/610-board_bcm6359-huawei-echolife-hg520v.patch deleted file mode 100644 index ff31e2973a..0000000000 --- a/target/linux/bcm63xx/patches-5.4/610-board_bcm6359-huawei-echolife-hg520v.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1579,6 +1579,36 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HW520 = { -+ .name = "HW6358GW_B", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_HW553 = { - .name = "HW553", - .expected_cpu_id = 0x6358, -@@ -1802,6 +1832,7 @@ static const struct board_info __initcon - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - &board_ct6373_1, -+ &board_HW520, - &board_HW553, - &board_HW556_A, - &board_HW556_B, -@@ -1883,6 +1914,7 @@ static struct of_device_id const bcm963x - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, -+ { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, - { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, }, - { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, }, diff --git a/target/linux/bcm63xx/patches-5.4/611-board_bcm6358-bt-home-hub-2-a.patch b/target/linux/bcm63xx/patches-5.4/611-board_bcm6358-bt-home-hub-2-a.patch deleted file mode 100644 index b7caeb417b..0000000000 --- a/target/linux/bcm63xx/patches-5.4/611-board_bcm6358-bt-home-hub-2-a.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1579,6 +1579,31 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_homehub2a = { -+ .name = "HOMEHUB2A", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4322, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_HW520 = { - .name = "HW6358GW_B", - .expected_cpu_id = 0x6358, -@@ -1832,6 +1857,7 @@ static const struct board_info __initcon - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - &board_ct6373_1, -+ &board_homehub2a, - &board_HW520, - &board_HW553, - &board_HW556_A, -@@ -1927,6 +1953,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, - { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, }, - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, -+ { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 - #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/631-board_bcm6361-sfr-neufbox-6.patch b/target/linux/bcm63xx/patches-5.4/631-board_bcm6361-sfr-neufbox-6.patch deleted file mode 100644 index 79e9efb2b4..0000000000 --- a/target/linux/bcm63xx/patches-5.4/631-board_bcm6361-sfr-neufbox-6.patch +++ /dev/null @@ -1,52 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1787,6 +1787,31 @@ static struct board_info __initdata boar - }; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - -+#ifdef CONFIG_BCM63XX_CPU_6362 -+static struct board_info __initdata board_nb6 = { -+ .name = "NB6", -+ .expected_cpu_id = 0x6362, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [4] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_6362 */ -+ - /* - * all boards - */ -@@ -1866,6 +1891,9 @@ static const struct board_info __initcon - &board_spw303v, - &board_DVAG3810BN, - #endif /* CONFIG_BCM63XX_CPU_6358 */ -+#ifdef CONFIG_BCM63XX_CPU_6362 -+ &board_nb6, -+#endif /* CONFIG_BCM63XX_CPU_6362 */ - }; - - static struct of_device_id const bcm963xx_boards_dt[] = { -@@ -1956,6 +1984,7 @@ static struct of_device_id const bcm963x - { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 -+ { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 - #endif /* CONFIG_BCM63XX_CPU_6368 */ diff --git a/target/linux/bcm63xx/patches-5.4/632-board_bcm6362-sagem-fast-2504n.patch b/target/linux/bcm63xx/patches-5.4/632-board_bcm6362-sagem-fast-2504n.patch deleted file mode 100644 index 3bb3ad4238..0000000000 --- a/target/linux/bcm63xx/patches-5.4/632-board_bcm6362-sagem-fast-2504n.patch +++ /dev/null @@ -1,62 +0,0 @@ -From: Max Staudt -Date: Wed, 15 Jan 2014 18:51:13 +0000 -Subject: [PATCH] bcm63xx: F@ST2504n board support (Linux-3.10.26) - -Signed-off-by: Max Staudt ---- ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1810,6 +1810,37 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_fast2504n = { -+ .name = "F@ST2504n", -+ .expected_cpu_id = 0x6362, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6362 */ - - /* -@@ -1893,6 +1924,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 - &board_nb6, -+ &board_fast2504n, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - }; - -@@ -1984,6 +2016,7 @@ static struct of_device_id const bcm963x - { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 -+ { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 diff --git a/target/linux/bcm63xx/patches-5.4/633-board-bcm6362-netgear-dgnd3700-v2.patch b/target/linux/bcm63xx/patches-5.4/633-board-bcm6362-netgear-dgnd3700-v2.patch deleted file mode 100644 index 17beb14154..0000000000 --- a/target/linux/bcm63xx/patches-5.4/633-board-bcm6362-netgear-dgnd3700-v2.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1811,6 +1811,30 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_dgnd3700v2 = { -+ .name = "96362ADVN2xh", -+ .expected_cpu_id = 0x6362, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [4] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_fast2504n = { - .name = "F@ST2504n", - .expected_cpu_id = 0x6362, -@@ -1924,6 +1948,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 - &board_nb6, -+ &board_dgnd3700v2, - &board_fast2504n, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - }; -@@ -2016,6 +2041,7 @@ static struct of_device_id const bcm963x - { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 -+ { .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, }, - { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ diff --git a/target/linux/bcm63xx/patches-5.4/634-board-bcm6362-huawei-hg253s-v2.patch b/target/linux/bcm63xx/patches-5.4/634-board-bcm6362-huawei-hg253s-v2.patch deleted file mode 100644 index db36cf2ff4..0000000000 --- a/target/linux/bcm63xx/patches-5.4/634-board-bcm6362-huawei-hg253s-v2.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1865,6 +1865,37 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_hg253s_v2 = { -+ .name = "hg253s", -+ .expected_cpu_id = 0x6362, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [4] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .timing_sel = 1, -+ .name = "RGMII", -+ }, -+ -+ [5] = { -+ .used = 1, -+ .phy_id = 24, -+ .timing_sel = 1, -+ .name = "WAN", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6362 */ - - /* -@@ -1950,6 +1981,7 @@ static const struct board_info __initcon - &board_nb6, - &board_dgnd3700v2, - &board_fast2504n, -+ &board_hg253s_v2, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - }; - -@@ -2041,6 +2073,7 @@ static struct of_device_id const bcm963x - { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, - #endif /* CONFIG_BCM63XX_CPU_6358 */ - #ifdef CONFIG_BCM63XX_CPU_6362 -+ { .compatible = "huawei,hg253s-v2", .data = &board_hg253s_v2, }, - { .compatible = "netgear,dgnd3700-v2", .data = &board_dgnd3700v2, }, - { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, diff --git a/target/linux/bcm63xx/patches-5.4/651-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/bcm63xx/patches-5.4/651-bcm63xx-add-support-for-96368MVWG-board.patch deleted file mode 100644 index 948d473f53..0000000000 --- a/target/linux/bcm63xx/patches-5.4/651-bcm63xx-add-support-for-96368MVWG-board.patch +++ /dev/null @@ -1,111 +0,0 @@ -From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Wed, 20 Jan 2010 16:21:30 +0100 -Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board. - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 95 ++++++++++++++++++++ - .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 2 + - 2 files changed, 97 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1899,6 +1899,52 @@ static struct board_info __initdata boar - #endif /* CONFIG_BCM63XX_CPU_6362 */ - - /* -+ * known 6368 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6368 -+static struct board_info __initdata board_96368mvwg = { -+ .name = "96368MVWG", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_usbd = 1, -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port1", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port2", -+ }, -+ [4] = { -+ .used = 1, -+ .phy_id = 0x12, -+ .name = "port0", -+ }, -+ [5] = { -+ .used = 1, -+ .phy_id = 0x11, -+ .name = "port3", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_6368 */ -+ -+/* - * all boards - */ - static const struct board_info __initconst *bcm963xx_boards[] = { -@@ -1983,6 +2029,9 @@ static const struct board_info __initcon - &board_fast2504n, - &board_hg253s_v2, - #endif /* CONFIG_BCM63XX_CPU_6362 */ -+#ifdef CONFIG_BCM63XX_CPU_6368 -+ &board_96368mvwg, -+#endif /* CONFIG_BCM63XX_CPU_6368 */ - }; - - static struct of_device_id const bcm963xx_boards_dt[] = { -@@ -2079,6 +2128,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - #endif /* CONFIG_BCM63XX_CPU_63268 */ ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -81,12 +81,25 @@ void __init board_early_setup(const stru - bcm63xx_pci_enabled = 1; - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G2_PCI; -+ -+ if (BCMCPU_IS_6368()) -+ val |= GPIO_MODE_6368_PCI_REQ1 | -+ GPIO_MODE_6368_PCI_GNT1 | -+ GPIO_MODE_6368_PCI_INTB | -+ GPIO_MODE_6368_PCI_REQ0 | -+ GPIO_MODE_6368_PCI_GNT0; - } - #endif - - if (board.has_pccard) { - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G1_MII_PCCARD; -+ -+ if (BCMCPU_IS_6368()) -+ val |= GPIO_MODE_6368_PCMCIA_CD1 | -+ GPIO_MODE_6368_PCMCIA_CD2 | -+ GPIO_MODE_6368_PCMCIA_VS1 | -+ GPIO_MODE_6368_PCMCIA_VS2; - } - - if (board.has_enet0 && !board.enet0.use_internal_phy) { diff --git a/target/linux/bcm63xx/patches-5.4/652-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/bcm63xx/patches-5.4/652-bcm63xx-add-support-for-96368MVNgr-board.patch deleted file mode 100644 index 663304d08f..0000000000 --- a/target/linux/bcm63xx/patches-5.4/652-bcm63xx-add-support-for-96368MVNgr-board.patch +++ /dev/null @@ -1,69 +0,0 @@ -From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Fri, 4 Nov 2011 12:33:48 +0100 -Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board. - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 67 +++++++++++++++++++++++++++++ - 1 files changed, 67 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1942,6 +1942,41 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_96368mvngr = { -+ .name = "96368MVNgr", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6368 */ - - /* -@@ -2031,6 +2066,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, -+ &board_96368mvngr, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - }; - -@@ -2128,6 +2164,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/653-board_bcm6369-comtrend-wap-5813n.patch b/target/linux/bcm63xx/patches-5.4/653-board_bcm6369-comtrend-wap-5813n.patch deleted file mode 100644 index 0386dc8308..0000000000 --- a/target/linux/bcm63xx/patches-5.4/653-board_bcm6369-comtrend-wap-5813n.patch +++ /dev/null @@ -1,75 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -13,6 +13,8 @@ - #include - #include - #include -+#include -+#include - #include - #include - #include -@@ -1977,6 +1979,47 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct sprom_fixup __initdata wap5813n_fixups[] = { -+ { .offset = 97, .value = 0xfeed }, -+ { .offset = 98, .value = 0x15d1 }, -+ { .offset = 99, .value = 0xfb0d }, -+ { .offset = 113, .value = 0xfef7 }, -+ { .offset = 114, .value = 0x15f7 }, -+ { .offset = 115, .value = 0xfb1a }, -+}; -+ -+static struct board_info __initdata board_WAP5813n = { -+ .name = "96369R-1231N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [4] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = wap5813n_fixups, -+ .num_board_fixups = ARRAY_SIZE(wap5813n_fixups), -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6368 */ - - /* -@@ -2067,6 +2110,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_WAP5813n, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - }; - -@@ -2166,6 +2210,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6368 - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, -+ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - #endif /* CONFIG_BCM63XX_CPU_63268 */ diff --git a/target/linux/bcm63xx/patches-5.4/654-board_bcm6368-comtrend-vr-3025u.patch b/target/linux/bcm63xx/patches-5.4/654-board_bcm6368-comtrend-vr-3025u.patch deleted file mode 100644 index 7772594394..0000000000 --- a/target/linux/bcm63xx/patches-5.4/654-board_bcm6368-comtrend-vr-3025u.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1980,6 +1980,59 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vr3025u_fixups[] = { -+ { .offset = 97, .value = 0xfeb3 }, -+ { .offset = 98, .value = 0x1618 }, -+ { .offset = 99, .value = 0xfab0 }, -+ { .offset = 113, .value = 0xfed1 }, -+ { .offset = 114, .value = 0x1609 }, -+ { .offset = 115, .value = 0xfad9 }, -+}; -+ -+static struct board_info __initdata board_VR3025u = { -+ .name = "96368M-1541N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vr3025u_fixups, -+ .num_board_fixups = ARRAY_SIZE(vr3025u_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -2110,6 +2163,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_VR3025u, - &board_WAP5813n, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - }; -@@ -2210,6 +2264,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6368 - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, -+ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/655-board_bcm6368-comtrend-vr-3025un.patch b/target/linux/bcm63xx/patches-5.4/655-board_bcm6368-comtrend-vr-3025un.patch deleted file mode 100644 index 82c0887840..0000000000 --- a/target/linux/bcm63xx/patches-5.4/655-board_bcm6368-comtrend-vr-3025un.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2033,6 +2033,59 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vr3025un_fixups[] = { -+ { .offset = 97, .value = 0xfeb3 }, -+ { .offset = 98, .value = 0x1618 }, -+ { .offset = 99, .value = 0xfab0 }, -+ { .offset = 113, .value = 0xfed1 }, -+ { .offset = 114, .value = 0x1609 }, -+ { .offset = 115, .value = 0xfad9 }, -+}; -+ -+static struct board_info __initdata board_VR3025un = { -+ .name = "96368M-1341N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vr3025un_fixups, -+ .num_board_fixups = ARRAY_SIZE(vr3025un_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -2164,6 +2217,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_VR3025u, -+ &board_VR3025un, - &board_WAP5813n, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - }; -@@ -2265,6 +2319,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, -+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/656-board_bcm6368-zyxel-p870hw-51a-v2.patch b/target/linux/bcm63xx/patches-5.4/656-board_bcm6368-zyxel-p870hw-51a-v2.patch deleted file mode 100644 index 0c2c2b9c8d..0000000000 --- a/target/linux/bcm63xx/patches-5.4/656-board_bcm6368-zyxel-p870hw-51a-v2.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1989,6 +1989,48 @@ static struct sprom_fixup __initdata vr3 - { .offset = 115, .value = 0xfad9 }, - }; - -+static struct board_info __initdata board_P870HW51A_V2 = { -+ .name = "P870HW-51a_v2", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_VR3025u = { - .name = "96368M-1541N", - .expected_cpu_id = 0x6368, -@@ -2216,6 +2258,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, - &board_WAP5813n, -@@ -2321,6 +2364,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - #endif /* CONFIG_BCM63XX_CPU_63268 */ diff --git a/target/linux/bcm63xx/patches-5.4/657-board_bcm6368-netgear-dgnd3700-v1.patch b/target/linux/bcm63xx/patches-5.4/657-board_bcm6368-netgear-dgnd3700-v1.patch deleted file mode 100644 index 47a19afbfa..0000000000 --- a/target/linux/bcm63xx/patches-5.4/657-board_bcm6368-netgear-dgnd3700-v1.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1980,6 +1980,30 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_DGND3700v1_3800B = { -+ .name = "DGND3700v1_3800B", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [5] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+ - static struct sprom_fixup __initdata vr3025u_fixups[] = { - { .offset = 97, .value = 0xfeb3 }, - { .offset = 98, .value = 0x1618 }, -@@ -2258,6 +2282,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_DGND3700v1_3800B, - &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, -@@ -2364,6 +2389,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/658-board_bcm6368-huawei-echolife-hg655b.patch b/target/linux/bcm63xx/patches-5.4/658-board_bcm6368-huawei-echolife-hg655b.patch deleted file mode 100644 index c1ad040cba..0000000000 --- a/target/linux/bcm63xx/patches-5.4/658-board_bcm6368-huawei-echolife-hg655b.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2004,6 +2004,52 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HG655b = { -+ .name = "HW65x", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_RALINK, -+ .caldata_offset = 0x7c0000, -+ .slot = 1, -+ .eeprom = "rt2x00.eeprom", -+ }, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; -+ - static struct sprom_fixup __initdata vr3025u_fixups[] = { - { .offset = 97, .value = 0xfeb3 }, - { .offset = 98, .value = 0x1618 }, -@@ -2283,6 +2329,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -+ &board_HG655b, - &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, -@@ -2389,6 +2436,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ diff --git a/target/linux/bcm63xx/patches-5.4/659-board_bcm6368-comtrend-vr-3026e.patch b/target/linux/bcm63xx/patches-5.4/659-board_bcm6368-comtrend-vr-3026e.patch deleted file mode 100644 index 4be53d10ab..0000000000 --- a/target/linux/bcm63xx/patches-5.4/659-board_bcm6368-comtrend-vr-3026e.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2198,6 +2198,59 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vr3026e_fixups[] = { -+ { .offset = 97, .value = 0xfeb3 }, -+ { .offset = 98, .value = 0x1618 }, -+ { .offset = 99, .value = 0xfab0 }, -+ { .offset = 113, .value = 0xfed1 }, -+ { .offset = 114, .value = 0x1609 }, -+ { .offset = 115, .value = 0xfad9 }, -+}; -+ -+static struct board_info __initdata board_VR3026e = { -+ .name = "96368MT-1341N1", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vr3026e_fixups, -+ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -2333,6 +2386,7 @@ static const struct board_info __initcon - &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, -+ &board_VR3026e, - &board_WAP5813n, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - }; -@@ -2435,6 +2489,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, -+ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, diff --git a/target/linux/bcm63xx/patches-5.4/660-board_bcm6368-huawei-echolife-hg622.patch b/target/linux/bcm63xx/patches-5.4/660-board_bcm6368-huawei-echolife-hg622.patch deleted file mode 100644 index c025a45eeb..0000000000 --- a/target/linux/bcm63xx/patches-5.4/660-board_bcm6368-huawei-echolife-hg622.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2050,6 +2050,52 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HG622 = { -+ .name = "96368MVWG_hg622", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_RALINK, -+ .caldata_offset = 0xfa0000, -+ .slot = 1, -+ .eeprom = "rt2x00.eeprom", -+ }, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; -+ - static struct sprom_fixup __initdata vr3025u_fixups[] = { - { .offset = 97, .value = 0xfeb3 }, - { .offset = 98, .value = 0x1618 }, -@@ -2382,6 +2428,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -+ &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, - &board_VR3025u, -@@ -2491,6 +2538,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "huawei,echolife-hg622", .data = &board_HG622, }, - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, diff --git a/target/linux/bcm63xx/patches-5.4/661-board_bcm6369-netgear-evg2000.patch b/target/linux/bcm63xx/patches-5.4/661-board_bcm6369-netgear-evg2000.patch deleted file mode 100644 index b33cb3a1ce..0000000000 --- a/target/linux/bcm63xx/patches-5.4/661-board_bcm6369-netgear-evg2000.patch +++ /dev/null @@ -1,62 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2004,6 +2004,43 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata EVG2000_fixups[] = { -+ { .offset = 219, .value = 0xec08 }, -+}; -+ -+static struct board_info __initdata board_EVG2000 = { -+ .name = "96369PVG", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [5] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4322, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = EVG2000_fixups, -+ .num_board_fixups = ARRAY_SIZE(EVG2000_fixups), -+ }, -+}; -+ - static struct board_info __initdata board_HG655b = { - .name = "HW65x", - .expected_cpu_id = 0x6368, -@@ -2428,6 +2465,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -+ &board_EVG2000, - &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, -@@ -2541,6 +2579,7 @@ static struct of_device_id const bcm963x - { .compatible = "huawei,echolife-hg622", .data = &board_HG622, }, - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, -+ { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/662-board_bcm6368-adb-av4202n.patch b/target/linux/bcm63xx/patches-5.4/662-board_bcm6368-adb-av4202n.patch deleted file mode 100644 index 5f224e5bd4..0000000000 --- a/target/linux/bcm63xx/patches-5.4/662-board_bcm6368-adb-av4202n.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1904,6 +1904,49 @@ static struct board_info __initdata boar - * known 6368 boards - */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+static struct board_info __initdata board_AV4202N = { -+ .name = "96368_Swiss_S1", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4322, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96368mvwg = { - .name = "96368MVWG", - .expected_cpu_id = 0x6368, -@@ -2462,6 +2505,7 @@ static const struct board_info __initcon - &board_hg253s_v2, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+ &board_AV4202N, - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -@@ -2570,6 +2614,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "adb,av4202n", .data = &board_AV4202N, }, - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, diff --git a/target/linux/bcm63xx/patches-5.4/663-board_bcm6368-observa-vh4032n.patch b/target/linux/bcm63xx/patches-5.4/663-board_bcm6368-observa-vh4032n.patch deleted file mode 100644 index d2b0a44c29..0000000000 --- a/target/linux/bcm63xx/patches-5.4/663-board_bcm6368-observa-vh4032n.patch +++ /dev/null @@ -1,125 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2377,6 +2377,106 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vh4032n_fixups[] = { -+ { .offset = 2, .value = 0x04d2 }, -+ { .offset = 4, .value = 0x4350 }, -+ { .offset = 65, .value = 0x1300 }, -+ { .offset = 68, .value = 0x0402 }, -+ { .offset = 70, .value = 0x0090 }, -+ { .offset = 71, .value = 0x4c19 }, -+ { .offset = 72, .value = 0x2345 }, -+ { .offset = 87, .value = 0x0315 }, -+ { .offset = 88, .value = 0x0315 }, -+ { .offset = 96, .value = 0x2048 }, -+ { .offset = 97, .value = 0xfed7 }, -+ { .offset = 98, .value = 0x15a6 }, -+ { .offset = 99, .value = 0xfaee }, -+ { .offset = 100, .value = 0x3e3a }, -+ { .offset = 101, .value = 0x3a36 }, -+ { .offset = 102, .value = 0xff7f }, -+ { .offset = 103, .value = 0x11b9 }, -+ { .offset = 104, .value = 0xfc53 }, -+ { .offset = 105, .value = 0xffe6 }, -+ { .offset = 106, .value = 0xfdd2 }, -+ { .offset = 107, .value = 0xfe49 }, -+ { .offset = 108, .value = 0xff6a }, -+ { .offset = 109, .value = 0x136e }, -+ { .offset = 110, .value = 0xfbed }, -+ { .offset = 111, .value = 0x0000 }, -+ { .offset = 112, .value = 0x2048 }, -+ { .offset = 113, .value = 0xfee2 }, -+ { .offset = 114, .value = 0x15e5 }, -+ { .offset = 115, .value = 0xfaed }, -+ { .offset = 116, .value = 0x3e3a }, -+ { .offset = 117, .value = 0x3a36 }, -+ { .offset = 118, .value = 0xffc8 }, -+ { .offset = 119, .value = 0x12b8 }, -+ { .offset = 120, .value = 0xfca1 }, -+ { .offset = 121, .value = 0xff9b }, -+ { .offset = 122, .value = 0x122a }, -+ { .offset = 123, .value = 0xfcc8 }, -+ { .offset = 124, .value = 0xff95 }, -+ { .offset = 125, .value = 0x146b }, -+ { .offset = 126, .value = 0xfbba }, -+ { .offset = 127, .value = 0x0000 }, -+ { .offset = 161, .value = 0x0000 }, -+ { .offset = 162, .value = 0x0000 }, -+ { .offset = 169, .value = 0x0000 }, -+ { .offset = 170, .value = 0x0000 }, -+ { .offset = 171, .value = 0x0000 }, -+ { .offset = 172, .value = 0x0000 }, -+ { .offset = 173, .value = 0x0000 }, -+ { .offset = 174, .value = 0x0000 }, -+ { .offset = 175, .value = 0x0000 }, -+ { .offset = 176, .value = 0x0000 }, -+ { .offset = 219, .value = 0x1108 }, -+}; -+ -+static struct board_info __initdata board_VH4032N = { -+ .name = "VH4032N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN4", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+ -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vh4032n_fixups, -+ .num_board_fixups = ARRAY_SIZE(vh4032n_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -2513,6 +2613,7 @@ static const struct board_info __initcon - &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, -+ &board_VH4032N, - &board_VR3025u, - &board_VR3025un, - &board_VR3026e, -@@ -2625,6 +2726,7 @@ static struct of_device_id const bcm963x - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, -+ { .compatible = "observa,vh4032n", .data = &board_VH4032N, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-5.4/664-board_bcm6368-actiontec-r1000h.patch b/target/linux/bcm63xx/patches-5.4/664-board_bcm6368-actiontec-r1000h.patch deleted file mode 100644 index 716a6e030f..0000000000 --- a/target/linux/bcm63xx/patches-5.4/664-board_bcm6368-actiontec-r1000h.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2227,6 +2227,29 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_R1000H = { -+ .name = "R1000H", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [5] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_VR3025u = { - .name = "96368M-1541N", - .expected_cpu_id = 0x6368, -@@ -2613,6 +2636,7 @@ static const struct board_info __initcon - &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, -+ &board_R1000H, - &board_VH4032N, - &board_VR3025u, - &board_VR3025un, -@@ -2715,6 +2739,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif /* CONFIG_BCM63XX_CPU_6362 */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "actiontec,r1000h", .data = &board_R1000H, }, - { .compatible = "adb,av4202n", .data = &board_AV4202N, }, - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, diff --git a/target/linux/bcm63xx/patches-5.4/681-board_bcm63269-brcm-bcm963269bhr.patch b/target/linux/bcm63xx/patches-5.4/681-board_bcm63269-brcm-bcm963269bhr.patch deleted file mode 100644 index a064234114..0000000000 --- a/target/linux/bcm63xx/patches-5.4/681-board_bcm63269-brcm-bcm963269bhr.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2543,6 +2543,46 @@ static struct board_info __initdata boar - #endif /* CONFIG_BCM63XX_CPU_6368 */ - - /* -+ * known 63268/63269 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_63268 -+static struct board_info __initdata board_963269bhr = { -+ .name = "963269BHR", -+ .expected_cpu_id = 0x63268, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_63268 */ -+ -+/* - * all boards - */ - static const struct board_info __initconst *bcm963xx_boards[] = { -@@ -2643,6 +2683,9 @@ static const struct board_info __initcon - &board_VR3026e, - &board_WAP5813n, - #endif /* CONFIG_BCM63XX_CPU_6368 */ -+#ifdef CONFIG_BCM63XX_CPU_63268 -+ &board_963269bhr, -+#endif /* CONFIG_BCM63XX_CPU_63268 */ - }; - - static struct of_device_id const bcm963xx_boards_dt[] = { -@@ -2755,6 +2798,7 @@ static struct of_device_id const bcm963x - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 -+ { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - #endif /* CONFIG_OF */ - { }, diff --git a/target/linux/bcm63xx/patches-5.4/682-board_bcm63268-inteno-vg50.patch b/target/linux/bcm63xx/patches-5.4/682-board_bcm63268-inteno-vg50.patch deleted file mode 100644 index 1275af5c22..0000000000 --- a/target/linux/bcm63xx/patches-5.4/682-board_bcm63268-inteno-vg50.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2580,6 +2580,48 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_vw6339gu = { -+ .name = "VW6339GU", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN2", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN4", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ [4] = { -+ .used = 1, -+ .phy_id = 7, -+ .name = "WAN", -+ .mii_override = 1, -+ .timing_sel = 1, -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_63268 */ - - /* -@@ -2685,6 +2727,7 @@ static const struct board_info __initcon - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - &board_963269bhr, -+ &board_vw6339gu, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - }; - -@@ -2799,6 +2842,7 @@ static struct of_device_id const bcm963x - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, -+ { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - #endif /* CONFIG_OF */ - { }, diff --git a/target/linux/bcm63xx/patches-5.4/683-board_bcm63268-brcm-bcm963268bu-p300.patch b/target/linux/bcm63xx/patches-5.4/683-board_bcm63268-brcm-bcm963268bu-p300.patch deleted file mode 100644 index c75d7a477e..0000000000 --- a/target/linux/bcm63xx/patches-5.4/683-board_bcm63268-brcm-bcm963268bu-p300.patch +++ /dev/null @@ -1,84 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2546,6 +2546,65 @@ static struct board_info __initdata boar - * known 63268/63269 boards - */ - #ifdef CONFIG_BCM63XX_CPU_63268 -+static struct board_info __initdata board_963268bu_p300 = { -+ .name = "963268BU_P300", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_usbd = 1, -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 17, -+ .name = "FE1", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "GbE2", -+ }, -+ [4] = { -+ .used = 1, -+ .phy_id = 0, -+ .name = "GbE3", -+ .mii_override = 1, -+ .timing_sel = 1, -+ }, -+ [5] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "GbE1", -+ .mii_override = 1, -+ .timing_sel = 1, -+ }, -+ [6] = { -+ .used = 1, -+ .phy_id = 24, -+ .name = "GbE4", -+ .mii_override = 1, -+ .timing_sel = 1, -+ }, -+ [7] = { -+ .used = 1, -+ .phy_id = 25, -+ .name = "GbE5", -+ .mii_override = 1, -+ .timing_sel = 1, -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_963269bhr = { - .name = "963269BHR", - .expected_cpu_id = 0x63268, -@@ -2726,6 +2785,7 @@ static const struct board_info __initcon - &board_WAP5813n, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 -+ &board_963268bu_p300, - &board_963269bhr, - &board_vw6339gu, - #endif /* CONFIG_BCM63XX_CPU_63268 */ -@@ -2841,6 +2901,7 @@ static struct of_device_id const bcm963x - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif /* CONFIG_BCM63XX_CPU_6368 */ - #ifdef CONFIG_BCM63XX_CPU_63268 -+ { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ diff --git a/target/linux/bcm63xx/patches-5.4/684-board_bcm63168-sky-sr102.patch b/target/linux/bcm63xx/patches-5.4/684-board_bcm63168-sky-sr102.patch deleted file mode 100644 index 7f1fb58a32..0000000000 --- a/target/linux/bcm63xx/patches-5.4/684-board_bcm63168-sky-sr102.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2681,6 +2681,42 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_BSKYB_63168 = { -+ .name = "BSKYB_63168", -+ .expected_cpu_id = 0x63268, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_63268 */ - - /* -@@ -2788,6 +2824,7 @@ static const struct board_info __initcon - &board_963268bu_p300, - &board_963269bhr, - &board_vw6339gu, -+ &board_BSKYB_63168, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - }; - -@@ -2904,6 +2941,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, -+ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - #endif /* CONFIG_OF */ - { }, diff --git a/target/linux/bcm63xx/patches-5.4/685-board-bcm63168-comtrend-vr-3032u.patch b/target/linux/bcm63xx/patches-5.4/685-board-bcm63168-comtrend-vr-3032u.patch deleted file mode 100644 index af4c5388cc..0000000000 --- a/target/linux/bcm63xx/patches-5.4/685-board-bcm63168-comtrend-vr-3032u.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2640,6 +2640,41 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_VR3032u = { -+ .name = "963168M-1841N1", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN2", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN4", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_vw6339gu = { - .name = "VW6339GU", - .expected_cpu_id = 0x63268, -@@ -2823,6 +2858,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_63268 - &board_963268bu_p300, - &board_963269bhr, -+ &board_VR3032u, - &board_vw6339gu, - &board_BSKYB_63168, - #endif /* CONFIG_BCM63XX_CPU_63268 */ -@@ -2940,6 +2976,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, -+ { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, - { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ diff --git a/target/linux/bcm63xx/patches-5.4/686-board-bcm63169-comtrend-vg-8050.patch b/target/linux/bcm63xx/patches-5.4/686-board-bcm63169-comtrend-vg-8050.patch deleted file mode 100644 index b55b4d3701..0000000000 --- a/target/linux/bcm63xx/patches-5.4/686-board-bcm63169-comtrend-vg-8050.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2640,6 +2640,31 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_VG8050 = { -+ .name = "963169P-1861N5", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [6] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .mii_override = 1, -+ .timing_sel = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_VR3032u = { - .name = "963168M-1841N1", - .expected_cpu_id = 0x63268, -@@ -2858,6 +2883,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_63268 - &board_963268bu_p300, - &board_963269bhr, -+ &board_VG8050, - &board_VR3032u, - &board_vw6339gu, - &board_BSKYB_63168, -@@ -2976,6 +3002,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, -+ { .compatible = "comtrend,vg-8050", .data = &board_VG8050, }, - { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, - { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, diff --git a/target/linux/bcm63xx/patches-5.4/687-board-bcm63167-sercomm-h500-s.patch b/target/linux/bcm63xx/patches-5.4/687-board-bcm63167-sercomm-h500-s.patch deleted file mode 100644 index 5bcb50672d..0000000000 --- a/target/linux/bcm63xx/patches-5.4/687-board-bcm63167-sercomm-h500-s.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2777,6 +2777,36 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_H500s = { -+ .name = "BXK00C-1.6", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [3] = { -+ .used = 1, -+ .phy_id = 12, -+ .name = "WAN", -+ }, -+ [4] = { -+ .used = 1, -+ .phy_id = 0, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .mii_override = 1, -+ .timing_sel = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_63268 */ - - /* -@@ -2887,6 +2917,7 @@ static const struct board_info __initcon - &board_VR3032u, - &board_vw6339gu, - &board_BSKYB_63168, -+ &board_H500s, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - }; - -@@ -3005,6 +3036,8 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vg-8050", .data = &board_VG8050, }, - { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, -+ { .compatible = "sercomm,h500-s-lowi", .data = &board_H500s, }, -+ { .compatible = "sercomm,h500-s-vfes", .data = &board_H500s, }, - { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, - #endif /* CONFIG_BCM63XX_CPU_63268 */ - #endif /* CONFIG_OF */