From: Sven Wegener Date: Sat, 12 Jun 2021 19:56:21 +0000 (+0200) Subject: mediatek: correctly log i2c response X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c4f9f9b44c82ffeacd9d3c00ba07171c35831337;p=openwrt%2Fstaging%2Fansuel.git mediatek: correctly log i2c response The read response is in the i2c_response variable. Also use %hhx format, because we're dealing with a single char. Signed-off-by: Sven Wegener --- diff --git a/target/linux/mediatek/files/drivers/leds/leds-ubnt-ledbar.c b/target/linux/mediatek/files/drivers/leds/leds-ubnt-ledbar.c index 9f12cda5d1..9bfe0e62f4 100644 --- a/target/linux/mediatek/files/drivers/leds/leds-ubnt-ledbar.c +++ b/target/linux/mediatek/files/drivers/leds/leds-ubnt-ledbar.c @@ -74,14 +74,14 @@ static int ubnt_ledbar_apply_state(struct ubnt_ledbar *ledbar) i2c_response = ubnt_ledbar_perform_transaction(ledbar, setup_msg); if (i2c_response != UBNT_LEDBAR_TRANSACTION_SUCCESS) { - dev_err(&ledbar->client->dev, "Error initializing LED transaction: %02x\n", ret); + dev_err(&ledbar->client->dev, "Error initializing LED transaction: %02hhx\n", i2c_response); ret = -EINVAL; goto out_gpio; } i2c_response = ubnt_ledbar_perform_transaction(ledbar, led_msg); if (i2c_response != UBNT_LEDBAR_TRANSACTION_SUCCESS) { - dev_err(&ledbar->client->dev, "Failed LED transaction: %02x\n", ret); + dev_err(&ledbar->client->dev, "Failed LED transaction: %02hhx\n", i2c_response); ret = -EINVAL; goto out_gpio; }