From: John Crispin Date: Mon, 20 Oct 2014 06:48:51 +0000 (+0000) Subject: ramips: revert 1d5afc012e9d3eef0b113e1a89cff7508b731f90 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c68b74e5c4a53e08fb7293d021952215c059c755;p=openwrt%2Fstaging%2Fneocturne.git ramips: revert 1d5afc012e9d3eef0b113e1a89cff7508b731f90 the submitted patch was bogus Signed-off-by: John Crispin SVN-Revision: 42994 --- diff --git a/0001-ramips-add-support-for-Nexx-WT3020-devices.patch b/0001-ramips-add-support-for-Nexx-WT3020-devices.patch deleted file mode 100644 index a67b275473..0000000000 --- a/0001-ramips-add-support-for-Nexx-WT3020-devices.patch +++ /dev/null @@ -1,319 +0,0 @@ -From fceb829eca2bc088ad66b18099b57dc96f1bae43 Mon Sep 17 00:00:00 2001 -From: Roger Pueyo Centelles -Date: Sun, 19 Oct 2014 17:50:01 +0200 -Subject: [PATCH] ramips: add support for Nexx WT3020 devices - ---- - target/linux/ramips/base-files/etc/board.d/01_leds | 3 + - .../linux/ramips/base-files/etc/board.d/02_network | 1 + - target/linux/ramips/base-files/etc/diag.sh | 3 + - target/linux/ramips/base-files/lib/ramips.sh | 3 + - .../ramips/base-files/lib/upgrade/platform.sh | 1 + - target/linux/ramips/dts/WT3020-4M.dts | 100 +++++++++++++++++++++ - target/linux/ramips/dts/WT3020-8M.dts | 100 +++++++++++++++++++++ - target/linux/ramips/image/Makefile | 2 + - 8 files changed, 213 insertions(+) - create mode 100644 target/linux/ramips/dts/WT3020-4M.dts - create mode 100644 target/linux/ramips/dts/WT3020-8M.dts - -diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds -index 26f384d..7ca7ffb 100755 ---- a/target/linux/ramips/base-files/etc/board.d/01_leds -+++ b/target/linux/ramips/base-files/etc/board.d/01_leds -@@ -213,6 +213,9 @@ case $board in - wt1520) - set_wifi_led "rt2800pci-phy0::radio" - ;; -+ wt3020) -+ ucidef_set_led_default "power" "power" "nexx:blue:power" "0" -+ ;; - y1 |\ - y1s) - ucidef_set_led_default "power" "power" "lenovo:blue:power" "1" -diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network -index 7ecec5f..ff8fbc0 100755 ---- a/target/linux/ramips/base-files/etc/board.d/02_network -+++ b/target/linux/ramips/base-files/etc/board.d/02_network -@@ -127,6 +127,7 @@ ramips_setup_interfaces() - hg255d | \ - rt-n14u | \ - wrtnode | \ -+ wt3020 | \ - ur-326n4g | \ - zbt-wa05) - ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" -diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh -index aed7d6a..2977099 100755 ---- a/target/linux/ramips/base-files/etc/diag.sh -+++ b/target/linux/ramips/base-files/etc/diag.sh -@@ -170,6 +170,9 @@ get_status_led() { - nexx-wt1520) - status_led="nexx-wt1520:white:power" - ;; -+ nexx-wt3020) -+ status_led="nexx:blue:power" -+ ;; - mzk-w300nh2) - status_led="mzkw300nh2:green:power" - ;; -diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh -index 08c5dff..88fa623 100755 ---- a/target/linux/ramips/base-files/lib/ramips.sh -+++ b/target/linux/ramips/base-files/lib/ramips.sh -@@ -184,6 +184,9 @@ ramips_board_detect() { - *"Nexx WT1520") - name="wt1520" - ;; -+ *"Nexx WT3020") -+ name="wt3020" -+ ;; - *"NW718") - name="nw718" - ;; -diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh -index 61a0935..c9a418e 100755 ---- a/target/linux/ramips/base-files/lib/upgrade/platform.sh -+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh -@@ -97,6 +97,7 @@ platform_check_image() { - wr8305rt |\ - wrtnode |\ - wt1520 |\ -+ wt3020 |\ - x5 |\ - x8 |\ - y1 |\ -diff --git a/target/linux/ramips/dts/WT3020-4M.dts b/target/linux/ramips/dts/WT3020-4M.dts -new file mode 100644 -index 0000000..7583680 ---- /dev/null -+++ b/target/linux/ramips/dts/WT3020-4M.dts -@@ -0,0 +1,100 @@ -+/dts-v1/; -+ -+/include/ "mt7620n.dtsi" -+ -+/ { -+ compatible = "wt3020", "ralink,mt7620n-soc"; -+ model = "Nexx WT3020"; -+ -+ palmbus@10000000 { -+ gpio2: gpio@660 { -+ status = "okay"; -+ }; -+ -+ gpio3: gpio@688 { -+ status = "okay"; -+ }; -+ -+ spi@b00 { -+ status = "okay"; -+ -+ m25p80@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "w25q32"; -+ reg = <0 0>; -+ linux,modalias = "m25p80", "w25q32"; -+ spi-max-frequency = <10000000>; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x0 0x30000>; -+ read-only; -+ }; -+ -+ partition@30000 { -+ label = "u-boot-env"; -+ reg = <0x30000 0x10000>; -+ read-only; -+ }; -+ -+ factory: partition@40000 { -+ label = "factory"; -+ reg = <0x40000 0x10000>; -+ read-only; -+ }; -+ -+ partition@50000 { -+ label = "firmware"; -+ reg = <0x50000 0x3b0000>; -+ }; -+ }; -+ }; -+ }; -+ -+ ehci@101c0000 { -+ status = "okay"; -+ }; -+ -+ ohci@101c1000 { -+ status = "okay"; -+ }; -+ -+ ethernet@10100000 { -+ mtd-mac-address = <&factory 0x4>; -+ ralink,port-map = "wllll"; -+ }; -+ -+ wmac@10180000 { -+ ralink,mtd-eeprom = <&factory 0>; -+ }; -+ -+ pinctrl { -+ state_default: pinctrl0 { -+ default { -+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf"; -+ ralink,function = "gpio"; -+ }; -+ }; -+ }; -+ -+ gpio-keys-polled { -+ compatible = "gpio-keys-polled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ poll-interval = <20>; -+ reset { -+ label = "reset"; -+ gpios = <&gpio0 1 1>; -+ linux,code = <0x198>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ power { -+ label = "nexx:blue:power"; -+ gpios = <&gpio3 0 0>; -+ }; -+ }; -+}; -diff --git a/target/linux/ramips/dts/WT3020-8M.dts b/target/linux/ramips/dts/WT3020-8M.dts -new file mode 100644 -index 0000000..5fa7c92 ---- /dev/null -+++ b/target/linux/ramips/dts/WT3020-8M.dts -@@ -0,0 +1,100 @@ -+/dts-v1/; -+ -+/include/ "mt7620n.dtsi" -+ -+/ { -+ compatible = "wt3020", "ralink,mt7620n-soc"; -+ model = "Nexx WT3020"; -+ -+ palmbus@10000000 { -+ gpio2: gpio@660 { -+ status = "okay"; -+ }; -+ -+ gpio3: gpio@688 { -+ status = "okay"; -+ }; -+ -+ spi@b00 { -+ status = "okay"; -+ -+ m25p80@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "w25q64"; -+ reg = <0 0>; -+ linux,modalias = "m25p80", "w25q64"; -+ spi-max-frequency = <10000000>; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x0 0x30000>; -+ read-only; -+ }; -+ -+ partition@30000 { -+ label = "u-boot-env"; -+ reg = <0x30000 0x10000>; -+ read-only; -+ }; -+ -+ factory: partition@40000 { -+ label = "factory"; -+ reg = <0x40000 0x10000>; -+ read-only; -+ }; -+ -+ partition@50000 { -+ label = "firmware"; -+ reg = <0x50000 0x7b0000>; -+ }; -+ }; -+ }; -+ }; -+ -+ ehci@101c0000 { -+ status = "okay"; -+ }; -+ -+ ohci@101c1000 { -+ status = "okay"; -+ }; -+ -+ ethernet@10100000 { -+ mtd-mac-address = <&factory 0x4>; -+ ralink,port-map = "wllll"; -+ }; -+ -+ wmac@10180000 { -+ ralink,mtd-eeprom = <&factory 0>; -+ }; -+ -+ pinctrl { -+ state_default: pinctrl0 { -+ default { -+ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf"; -+ ralink,function = "gpio"; -+ }; -+ }; -+ }; -+ -+ gpio-keys-polled { -+ compatible = "gpio-keys-polled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ poll-interval = <20>; -+ reset { -+ label = "reset"; -+ gpios = <&gpio0 1 1>; -+ linux,code = <0x198>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ power { -+ label = "nexx:blue:power"; -+ gpios = <&gpio3 0 0>; -+ }; -+ }; -+}; -diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile -index f048caf..a93b82c 100644 ---- a/target/linux/ramips/image/Makefile -+++ b/target/linux/ramips/image/Makefile -@@ -769,6 +769,7 @@ Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR3 - Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U) - Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT) - Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE) -+Image/Build/Profile/WT3020=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wt3020,WT3020) - Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) - - ifeq ($(SUBTARGET),mt7620n) -@@ -778,6 +779,7 @@ define Image/Build/Profile/Default - $(call Image/Build/Profile/RT-N14U,$(1)) - $(call Image/Build/Profile/WR8305RT,$(1)) - $(call Image/Build/Profile/WRTNODE,$(1)) -+ $(call Image/Build/Profile/WT3020,$(1)) - $(call Image/Build/Profile/ZBT-WA05,$(1)) - endef - endif --- -2.1.1 -