From: Adrian Schmutzler Date: Tue, 6 Aug 2019 10:20:05 +0000 (+0200) Subject: ar71xx: improve support for TP-Link CPE510 v2 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c79b796280fa5cd64bac663f9d5e5d9a737c30d6;p=openwrt%2Fstaging%2Fjow.git ar71xx: improve support for TP-Link CPE510 v2 This fixes commit bae927c551fd ("ar71xx: add support for TP-LINK CPE510 V2.0") where the support for this device wasn't optimal. Device support for the CPE510v2 so far has been a hack to enable flashing with CPE510v1 images. Those even have different hardware (e.g. additional ethernet port). With this patch, we provide proper support for this device in ar71xx. Installation: - Flash factory image through stock firmware WEB UI or through TFTP - To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. - Rename factory image to recovery.bin - Stock TFTP server IP: 192.168.0.100 - Stock device TFTP address: 192.168.0.254 Fixes: bae927c551fd ("ar71xx: add support for TP-LINK CPE510 V2.0") Signed-off-by: Andrew Cameron [Rebased onto revert commit, changed comments in mach-cpe510.c, changed commit title and description, fixed eth0 MAC address, removed eth1 initialization] Signed-off-by: Adrian Schmutzler [squashed revert, added fixes tag] Signed-off-by: Petr Štetiar --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 8fc6fc8eea..0a63820de7 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -255,6 +255,7 @@ cpe210|\ cpe210-v2|\ cpe210-v3|\ cpe510|\ +cpe510-v2|\ wbs210|\ wbs510) ucidef_set_rssimon "wlan0" "200000" "1" @@ -265,7 +266,8 @@ wbs510) case "$board" in cpe210-v2|\ - cpe210-v3) + cpe210-v3|\ + cpe510-v2) ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0" ;; *) diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 78825af597..5307dd23f2 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -76,6 +76,7 @@ ar71xx_setup_interfaces() cf-e380ac-v2|\ cpe210-v2|\ cpe210-v3|\ + cpe510-v2|\ dr342|\ eap120|\ eap300v2|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 894835b14d..03dfbcebf9 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -760,14 +760,11 @@ ar71xx_board_detect() { ;; *"CPE510/520") name="cpe510" + tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" + ;; + *"CPE510 v2") + name="cpe510-v2" tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)" - case $AR71XX_MODEL in - 'TP-Link CPE510 v2.0') - ;; - *) - tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" - ;; - esac ;; *"CPE830") name="cpe830" diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index b995cdf123..d5570fdf18 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -586,6 +586,7 @@ platform_check_image() { return $? ;; cpe210|\ + cpe510|\ eap120|\ wbs210|\ wbs510) @@ -597,19 +598,9 @@ platform_check_image() { tplink_pharos_check_image "$1" "01000000" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0 return 1 ;; - cpe510) - local modelstr="$(tplink_pharos_v2_get_model_string)" - tplink_pharos_board_detect $modelstr - case $AR71XX_MODEL in - 'TP-Link CPE510 v2.0') - tplink_pharos_check_image "$1" "7f454c46" "$modelstr" '\0\xff\r' && return 0 - return 1 - ;; - *) - tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_get_model_string)" '' && return 0 - return 1 - ;; - esac + cpe510-v2) + tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0 + return 1 ;; a40|\ a60|\ diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c index 16efbc8802..49d9cf9bb5 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c @@ -230,6 +230,35 @@ static void __init cpe210_v2_setup(void) ath79_register_wmac(ee, mac); } +static void __init cpe510_v2_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f830008); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + /* disable PHY_SWAP and PHY_ADDR_SWAP bits */ + ath79_setup_ar933x_phy4_switch(false, false); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe210_v2_leds_gpio), + cpe210_v2_leds_gpio); + ath79_register_gpio_keys_polled(-1, CPE510_KEYS_POLL_INTERVAL, + ARRAY_SIZE(cpe510_gpio_keys), + cpe510_gpio_keys); + + ath79_register_m25p80(NULL); + ath79_register_mdio(1, 0x0); + + /* LAN port */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(4); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_register_eth(0); + + ath79_register_wmac(ee, mac); +} + MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210", "TP-LINK CPE210/220", cpe210_setup); @@ -242,6 +271,9 @@ MIPS_MACHINE(ATH79_MACH_CPE210_V3, "CPE210V3", "TP-LINK CPE210 v3", MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520", cpe510_setup); +MIPS_MACHINE(ATH79_MACH_CPE510_V2, "CPE510V2", "TP-LINK CPE510 v2", + cpe510_v2_setup); + MIPS_MACHINE(ATH79_MACH_WBS210, "WBS210", "TP-LINK WBS210", wbs_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 9722744a37..900b4ec87b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -79,6 +79,7 @@ enum ath79_mach_type { ATH79_MACH_CPE210_V3, /* TP-LINK CPE210 v3 */ ATH79_MACH_CPE505N, /* P&W CPE505N */ ATH79_MACH_CPE510, /* TP-LINK CPE510 */ + ATH79_MACH_CPE510_V2, /* TP-LINK CPE510 v2 */ ATH79_MACH_CPE830, /* YunCore CPE830 */ ATH79_MACH_CPE870, /* YunCore CPE870 */ ATH79_MACH_CR3000, /* PowerCloud Systems CR3000 */ diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk index 7423347252..3b8659d1d6 100644 --- a/target/linux/ar71xx/image/generic-tp-link.mk +++ b/target/linux/ar71xx/image/generic-tp-link.mk @@ -177,6 +177,14 @@ define Device/cpe510-520-v1 endef TARGET_DEVICES += cpe510-520-v1 +define Device/cpe510-v2 + $(Device/cpe510-520-v1) + DEVICE_TITLE := TP-LINK CPE510 v2 + BOARDNAME := CPE510V2 + TPLINK_BOARD_ID := CPE510V2 +endef +TARGET_DEVICES += cpe510-v2 + define Device/cpe210-220-v1 $(Device/cpe510-520-v1) DEVICE_TITLE := TP-LINK CPE210/220 v1 diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 2a57aefd14..ce3a039e7e 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -271,7 +271,7 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "support-list", }, - /** Firmware layout for the CPE510/520 */ + /** Firmware layout for the CPE510/520 V1 */ { .id = "CPE510", .vendor = "CPE510(TP-LINK|UN|N300-5):1.0\r\n", @@ -284,17 +284,7 @@ static struct device_info boards[] = { "CPE510(TP-LINK|EU|N300-5):1.1\r\n" "CPE520(TP-LINK|UN|N300-5):1.1\r\n" "CPE520(TP-LINK|US|N300-5):1.1\r\n" - "CPE520(TP-LINK|EU|N300-5):1.1\r\n" - "CPE510(TP-LINK|EU|N300-5|00000000):2.0\r\n" - "CPE510(TP-LINK|EU|N300-5|45550000):2.0\r\n" - "CPE510(TP-LINK|EU|N300-5|55530000):2.0\r\n" - "CPE510(TP-LINK|UN|N300-5|00000000):2.0\r\n" - "CPE510(TP-LINK|UN|N300-5|45550000):2.0\r\n" - "CPE510(TP-LINK|UN|N300-5|55530000):2.0\r\n" - "CPE510(TP-LINK|US|N300-5|55530000):2.0\r\n" - "CPE510(TP-LINK|UN|N300-5):2.0\r\n" - "CPE510(TP-LINK|EU|N300-5):2.0\r\n" - "CPE510(TP-LINK|US|N300-5):2.0\r\n", + "CPE520(TP-LINK|EU|N300-5):1.1\r\n", .support_trail = '\xff', .soft_ver = NULL,