From: Alexandre Belloni Date: Fri, 31 Aug 2018 15:11:10 +0000 (+0200) Subject: i2c: designware: allow IP specific sda_hold_time X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c7fa7aeff85cbd71c724e7a7b167c24356de9c5f;p=openwrt%2Fstaging%2Fblogic.git i2c: designware: allow IP specific sda_hold_time Because some old designware IPs were not supporting setting an SDA hold time, vendors developed their own solution. Add a way for the final driver to provide its own SDA hold time handling. Reviewed-by: Andy Shevchenko Tested-by: Jarkko Nikula Acked-by: Jarkko Nikula Signed-off-by: Alexandre Belloni Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index 69ec4a791f23..36271cd75342 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -201,6 +201,8 @@ int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev) dev_dbg(dev->dev, "SDA Hold Time TX:RX = %d:%d\n", dev->sda_hold_time & ~(u32)DW_IC_SDA_HOLD_RX_MASK, dev->sda_hold_time >> DW_IC_SDA_HOLD_RX_SHIFT); + } else if (dev->set_sda_hold_time) { + dev->set_sda_hold_time(dev); } else if (dev->sda_hold_time) { dev_warn(dev->dev, "Hardware too old to adjust SDA hold time.\n"); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index e367b1af4ab2..f6cad20a86ff 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -269,6 +269,7 @@ struct dw_i2c_dev { void (*disable)(struct dw_i2c_dev *dev); void (*disable_int)(struct dw_i2c_dev *dev); int (*init)(struct dw_i2c_dev *dev); + int (*set_sda_hold_time)(struct dw_i2c_dev *dev); int mode; struct i2c_bus_recovery_info rinfo; };