From: Sander Vanheule <sander@svanheule.net>
Date: Thu, 25 Nov 2021 05:50:09 +0000 (+0100)
Subject: realtek: netgear-gigabit: Enable RTL8231
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c88124cfc4c54ddee7f48ae5339ed1b0dd8d0666;p=openwrt%2Fstaging%2Flinusw.git

realtek: netgear-gigabit: Enable RTL8231

Since the move to 5.10, there are now two GPIO drivers. The gpio0 node
refers to the internal GPIOs, so the indirect-access-bus-id is no longer
relevant for that node.

Set indirect-access-bus-id to the correct value (31) on the correct node
(gpio1) and enable the device.

Cc: Raylynn Knight <rayknight@me.com>
Cc: Michael Mohr <akihana@gmail.com>
Cc: Stijn Segers <foss@volatilesystems.org>
Cc: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Bjørn Mork <bjorn@mork.no>
---

diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi
index 72956359d1..db411def30 100644
--- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi
+++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit.dtsi
@@ -30,8 +30,10 @@
 	};
 };
 
-&gpio0 {
-	indirect-access-bus-id = <0>;
+&gpio1 {
+	status = "okay";
+
+	indirect-access-bus-id = <31>;
 };
 
 &ethernet0 {