From: Pawel Dembicki Date: Thu, 19 Apr 2018 07:20:58 +0000 (+0200) Subject: ramips: add support for D-Link DWR-960 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c948a4782ba9e99f690a75ddf95ad76add95b5fa;p=openwrt%2Fstaging%2Fwigyori.git ramips: add support for D-Link DWR-960 The DWR-960 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 128 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610 mpcie card) - 4x 10/100 Mbps Ethernet (1 WAN and 3 LAN) - 1x 10/100/1000 Mbps Ethernet (1 LAN) (AR8035) - 2x internal, non-detachable antennas (Wifi 2.4G) - 3x external, detachable antennas (2x LTE, 1x Wifi 5G) - 1x LTE modem - UART (J4) header on PCB (57600 8n1) - 9x LED, 2x button - JBOOT bootloader Known issues: - Flash is extremely slow. Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki --- diff --git a/target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts b/target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts new file mode 100644 index 0000000000..063d65a70d --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_dlink_dwr-960.dts @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "dlink,dwr-960", "ralink,mt7620a-soc"; + model = "D-Link DWR-960"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status: status { + label = "dwr-960:green:status"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "dwr-960:green:wan"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "dwr-960:green:lan"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + sms { + label = "dwr-960:green:sms"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + signal_green { + label = "dwr-960:green:signal"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + }; + + signal_red { + label = "dwr-960:red:signal"; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + 4g { + label = "dwr-960:green:4g"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; + + 3g { + label = "dwr-960:green:3g"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "dwr-960:green:wlan5g"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wlan2g { + label = "dwr-960:green:wlan2g"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; +}; + +ðernet { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins &mdio_pins>; + mediatek,portmap = "wllll"; + + port@5 { + status = "okay"; + phy-mode = "rgmii-txid"; + phy-handle = <&phy7>; + }; + + mdio-bus { + status = "okay"; + + phy7: ethernet-phy@7 { + reg = <7>; + phy-mode = "rgmii-id"; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "jboot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + compatible = "amit,jimage"; + label = "firmware"; + reg = <0x10000 0xfe0000>; + }; + + config: partition@ff0000 { + label = "config"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5000000 6000000>; + mediatek,mtd-eeprom = <&config 0xe08e>; + mtd-mac-address = <&config 0xe50e>; + mtd-mac-address-increment = <2>; + }; +}; + +&state_default { + default { + ralink,group = "i2c", "wled", "spi refclk", "uartf", "ephy"; + ralink,function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 552879e02f..d5365ac70e 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -279,6 +279,20 @@ define Device/dlink_dwr-922-e2 endef TARGET_DEVICES += dlink_dwr-922-e2 +define Device/dlink_dwr-960 + $(Device/amit_jboot) + SOC := mt7620a + IMAGE_SIZE := 16256k + DEVICE_VENDOR := D-Link + DEVICE_MODEL := DWR-960 + DLINK_ROM_ID := DLK6E2429001 + DLINK_FAMILY_MEMBER := 0x6E24 + DLINK_FIRMWARE_SIZE := 0xFE0000 + DEVICE_PACKAGES += kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi \ + kmod-mt76x0e +endef +TARGET_DEVICES += dlink_dwr-960 + define Device/dovado_tiny-ac SOC := mt7620a IMAGE_SIZE := 7872k diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index fe6dfac50e..e4fd875019 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -87,6 +87,9 @@ dlink,dwr-922-e2) ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link" ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx" ;; +dlink,dwr-960) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x2e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" dovado,tiny-ac) set_wifi_led "$boardname:orange:wifi" ;; diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 76e1d56bd3..d870b5c11c 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -100,6 +100,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:2" "2:lan:1" "3:lan:3" "4:lan" "0:wan" "6@eth0" ;; + dlink,dwr-960) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "6@eth0" + ;; edimax,br-6478ac-v2|\ tplink,archer-c2-v1) ucidef_add_switch "switch1" \ @@ -273,6 +277,7 @@ ramips_setup_macs() dlink,dwr-118-a2|\ dlink,dwr-921-c1|\ dlink,dwr-922-e2|\ + dlink,dwr-960|\ lava,lr-25g001) wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) lan_mac=$(macaddr_add "$wan_mac" 1) diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches index 85380d84a8..f2355fdb97 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches @@ -11,6 +11,9 @@ dlink,dir-510l) ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0" ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1" ;; +dlink,dwr-960) + ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "0" "1" + ;; head-weblink,hdrm200) ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0" ucidef_add_gpio_switch "io1" "I/O 1" "1" diff --git a/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index f33ed82f62..291f89f41d 100644 --- a/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -28,6 +28,7 @@ case "$FIRMWARE" in dlink,dwr-118-a2|\ dlink,dwr-921-c1|\ dlink,dwr-922-e2|\ + dlink,dwr-960|\ lava,lr-25g001) wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) wifi_mac=$(macaddr_add "$wan_mac" 1)