From: Jan Hoffmann <jan@3e8.eu>
Date: Sat, 17 Dec 2022 20:39:40 +0000 (+0100)
Subject: realtek: don't set L2LEARNING flag in rtl83xx TX header
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=c94ca63ed4eed9aa92dc2fa4d61235b6845b42d3;p=openwrt%2Fstaging%2Fblocktrron.git

realtek: don't set L2LEARNING flag in rtl83xx TX header

As learning for the CPU port is now disabled globally, the bit in the
TX header doesn't have any effect anymore. Remove it to make the header
consistent with the global configuration.

Originally, this change was intended to be applied before commit
eb456aedfe24 ("realtek: use assisted learning on CPU port"), which is
why the commit message incorrectly mentions that the TX header already
disables learning.

The reason for disabling learning on the CPU port in the first place is
that it doesn't work correctly when packets are trapped to the CPU and
then forwarded by the CPU to other ports. In that case, the switch would
incorrectly learn the CPU port as source. An example that triggered this
issue are Multicast Listener Reports and IGMP membership reports.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
---

diff --git a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
index 166e49e139..32de5cc554 100644
--- a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
+++ b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c
@@ -96,7 +96,7 @@ struct notify_b {
 static void rtl838x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio)
 {
 	// cpu_tag[0] is reserved on the RTL83XX SoCs
-	h->cpu_tag[1] = 0x0401;  // BIT 10: RTL8380_CPU_TAG, BIT0: L2LEARNING on
+	h->cpu_tag[1] = 0x0400;  // BIT 10: RTL8380_CPU_TAG
 	h->cpu_tag[2] = 0x0200;  // Set only AS_DPM, to enable DPM settings below
 	h->cpu_tag[3] = 0x0000;
 	h->cpu_tag[4] = BIT(dest_port) >> 16;
@@ -111,7 +111,7 @@ static void rtl839x_create_tx_header(struct p_hdr *h, unsigned int dest_port, in
 {
 	// cpu_tag[0] is reserved on the RTL83XX SoCs
 	h->cpu_tag[1] = 0x0100; // RTL8390_CPU_TAG marker
-	h->cpu_tag[2] = BIT(4) | BIT(7); /* AS_DPM (4) and L2LEARNING (7) flags */
+	h->cpu_tag[2] = BIT(4); /* AS_DPM flag */
 	h->cpu_tag[3] = h->cpu_tag[4] = h->cpu_tag[5] = 0;
 	// h->cpu_tag[1] |= BIT(1) | BIT(0); // Bypass filter 1/2
 	if (dest_port >= 32) {
diff --git a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c
index 166e49e139..32de5cc554 100644
--- a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c
+++ b/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c
@@ -96,7 +96,7 @@ struct notify_b {
 static void rtl838x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio)
 {
 	// cpu_tag[0] is reserved on the RTL83XX SoCs
-	h->cpu_tag[1] = 0x0401;  // BIT 10: RTL8380_CPU_TAG, BIT0: L2LEARNING on
+	h->cpu_tag[1] = 0x0400;  // BIT 10: RTL8380_CPU_TAG
 	h->cpu_tag[2] = 0x0200;  // Set only AS_DPM, to enable DPM settings below
 	h->cpu_tag[3] = 0x0000;
 	h->cpu_tag[4] = BIT(dest_port) >> 16;
@@ -111,7 +111,7 @@ static void rtl839x_create_tx_header(struct p_hdr *h, unsigned int dest_port, in
 {
 	// cpu_tag[0] is reserved on the RTL83XX SoCs
 	h->cpu_tag[1] = 0x0100; // RTL8390_CPU_TAG marker
-	h->cpu_tag[2] = BIT(4) | BIT(7); /* AS_DPM (4) and L2LEARNING (7) flags */
+	h->cpu_tag[2] = BIT(4); /* AS_DPM flag */
 	h->cpu_tag[3] = h->cpu_tag[4] = h->cpu_tag[5] = 0;
 	// h->cpu_tag[1] |= BIT(1) | BIT(0); // Bypass filter 1/2
 	if (dest_port >= 32) {