From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Tue, 29 Apr 2008 19:33:47 +0000 (+0400)
Subject: [MIPS] Pb1000: bury the remnants of the PCI code
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=cb0e8b0fba53e1aa6c4786bc465cfc641e8a77e7;p=openwrt%2Fstaging%2Fblogic.git

[MIPS] Pb1000: bury the remnants of the PCI code

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c
index a06c653596cb..25df167a95b3 100644
--- a/arch/mips/au1000/pb1000/board_setup.c
+++ b/arch/mips/au1000/pb1000/board_setup.c
@@ -145,13 +145,6 @@ void __init board_setup(void)
 	au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
 	au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
 
-#ifdef CONFIG_PCI
-	au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
-	au_writel(0, SDRAM_MBAR);        // set mbar to 0
-	au_writel(0x2, SDRAM_CMD);       // enable memory accesses
-	au_sync_delay(1);
-#endif
-
 	/*
 	 * Enable Au1000 BCLK switching - note: sed1356 must not use
 	 * its BCLK (Au1000 LCLK) for any timings