From: Rafael J. Wysocki Date: Wed, 4 Feb 2009 01:01:15 +0000 (+0100) Subject: PCI PM: Do not disable and enable bridges during suspend-resume X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=cbbc2f6b0d438f80831c20124137ea92f0e5149b;p=openwrt%2Fstaging%2Fblogic.git PCI PM: Do not disable and enable bridges during suspend-resume It is a mistake to disable and enable PCI bridges and PCI Express ports during suspend-resume, at least at the time when it is currently done. Disabling them may lead to problems with accessing devices behind them and they should be automatically enabled when their standard config spaces are restored. Fix this by not attempting to disable bridges during suspend and enable them during resume. Signed-off-by: Rafael J. Wysocki Acked-by: Linus Torvalds Signed-off-by: Jesse Barnes --- diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index fdb6a697e05a..ac6c9e493f4c 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -434,16 +434,18 @@ static int pci_pm_default_resume(struct pci_dev *pci_dev) { pci_fixup_device(pci_fixup_resume, pci_dev); - if (!pci_is_bridge(pci_dev)) - pci_enable_wake(pci_dev, PCI_D0, false); + if (pci_is_bridge(pci_dev)) + return 0; + pci_enable_wake(pci_dev, PCI_D0, false); return pci_pm_reenable_device(pci_dev); } static void pci_pm_default_suspend_generic(struct pci_dev *pci_dev) { - /* If device is enabled at this point, disable it */ - pci_disable_enabled_device(pci_dev); + /* If a non-bridge device is enabled at this point, disable it */ + if (!pci_is_bridge(pci_dev)) + pci_disable_enabled_device(pci_dev); /* * Save state with interrupts enabled, because in principle the bus the * device is on may be put into a low power state after this code runs.