From: Jesse Brandeburg Date: Tue, 26 Aug 2008 11:27:27 +0000 (-0700) Subject: ixgbe: fix dca hints going to wrong processor X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=cc41ac7c0011703460dd4d4674bb7cbf73bb883d;p=openwrt%2Fstaging%2Fblogic.git ixgbe: fix dca hints going to wrong processor hardware was configured incorrectly which led all hints to be sent to queue[0]'s DCA configuration. Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 6b96c41687df..28d3321b0dd2 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1410,10 +1410,51 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) } } -#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ - (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) +#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 + +static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index) +{ + struct ixgbe_ring *rx_ring; + u32 srrctl; + int queue0; + unsigned long *mask, maskval = 1; + long shift, len; + + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { + mask = (unsigned long *) &adapter->ring_feature[RING_F_RSS].mask; + len = sizeof(adapter->ring_feature[RING_F_RSS].mask) * 8; + } else { + mask = &maskval; + len = 1; + } + shift = find_first_bit(mask, len); + queue0 = index << shift; + rx_ring = &adapter->rx_ring[queue0]; + + srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(index)); + + srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK; + srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK; + + if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + srrctl |= IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; + srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; + srrctl |= ((IXGBE_RX_HDR_SIZE << + IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & + IXGBE_SRRCTL_BSIZEHDR_MASK); + } else { + srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF; + + if (rx_ring->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE) + srrctl |= IXGBE_RXBUFFER_2048 >> + IXGBE_SRRCTL_BSIZEPKT_SHIFT; + else + srrctl |= rx_ring->rx_buf_len >> + IXGBE_SRRCTL_BSIZEPKT_SHIFT; + } + IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(index), srrctl); +} -#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /** * ixgbe_get_skb_hdr - helper function for LRO header processing * @skb: pointer to sk_buff to be added to LRO packet @@ -1441,6 +1482,9 @@ static int ixgbe_get_skb_hdr(struct sk_buff *skb, void **iphdr, void **tcph, return 0; } +#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \ + (((S) & (PAGE_SIZE - 1)) ? 1 : 0)) + /** * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset * @adapter: board private structure @@ -1460,7 +1504,8 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) 0x6A3E67EA, 0x14364D17, 0x3BED200D}; u32 fctrl, hlreg0; u32 pages; - u32 reta = 0, mrqc, srrctl; + u32 reta = 0, mrqc; + u32 rdrxctl; int rx_buf_len; /* Decide whether to use packet split mode or not */ @@ -1493,27 +1538,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) pages = PAGE_USE_COUNT(adapter->netdev->mtu); - srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(0)); - srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK; - srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK; - - if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { - srrctl |= PAGE_SIZE >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; - srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; - srrctl |= ((IXGBE_RX_HDR_SIZE << - IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & - IXGBE_SRRCTL_BSIZEHDR_MASK); - } else { - srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF; - - if (rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE) - srrctl |= - IXGBE_RXBUFFER_2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; - else - srrctl |= rx_buf_len >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; - } - IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(0), srrctl); - rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc); /* disable receives while setting up the descriptors */ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); @@ -1542,8 +1566,24 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) adapter->rx_ring[i].lro_mgr.dev = adapter->netdev; adapter->rx_ring[i].lro_mgr.ip_summed = CHECKSUM_UNNECESSARY; adapter->rx_ring[i].lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY; + + ixgbe_configure_srrctl(adapter, j); } + /* + * For VMDq support of different descriptor types or + * buffer sizes through the use of multiple SRRCTL + * registers, RDRXCTL.MVMEN must be set to 1 + * + * also, the manual doesn't mention it clearly but DCA hints + * will only use queue 0's tags unless this bit is set. Side + * effects of setting this bit are only that SRRCTL must be + * fully programmed [0..15] + */ + rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); + rdrxctl |= IXGBE_RDRXCTL_MVMEN; + IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl); + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { /* Fill out redirection table */ diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 85eb03cce258..3e9c483ad8e6 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -356,12 +356,10 @@ #define IXGBE_ANLP2 0x042B4 #define IXGBE_ATLASCTL 0x04800 -/* RSCCTL Bit Masks */ -#define IXGBE_RSCCTL_RSCEN 0x01 -#define IXGBE_RSCCTL_MAXDESC_1 0x00 -#define IXGBE_RSCCTL_MAXDESC_4 0x04 -#define IXGBE_RSCCTL_MAXDESC_8 0x08 -#define IXGBE_RSCCTL_MAXDESC_16 0x0C +/* RDRXCTL Bit Masks */ +#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */ +#define IXGBE_RDRXCTL_MVMEN 0x00000020 +#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */ /* CTRL Bit Masks */ #define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */