From: Michael Pratt Date: Mon, 31 May 2021 07:56:20 +0000 (-0400) Subject: ramips: mt7620: add ephy-disable option to switch driver X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=cc6fd6fbb505071e08011f7998afaffefcf08fd3;p=openwrt%2Fstaging%2Flinusw.git ramips: mt7620: add ephy-disable option to switch driver Add back the register write to disable internal PHYs as a separate option in the code that can be set using a DTS property. Set the option to true by default when an external mt7530 switch is identified. This makes the driver more in sync with original SDK code while keeping the lines separated into different options to accommodate any board with any PHY layout. Signed-off-by: Michael Pratt --- diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c index 67f70f286d..ae90f0484d 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.c @@ -73,7 +73,13 @@ static void mt7620_hw_init(struct mt7620_gsw *gsw) /* Enable MIB stats */ mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_MIB_CNT_EN) | (1 << 1), GSW_REG_MIB_CNT_EN); - if (gsw->ephy_base) { + if (gsw->ephy_disable) { + mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_GPC1) | + (gsw->ephy_base << 16) | (0x1f << 24), + GSW_REG_GPC1); + + pr_info("gsw: internal ephy disabled\n"); + } else if (gsw->ephy_base) { mtk_switch_w32(gsw, mtk_switch_r32(gsw, GSW_REG_GPC1) | (gsw->ephy_base << 16), GSW_REG_GPC1); @@ -194,13 +200,17 @@ int mtk_gsw_init(struct fe_priv *priv) gsw = platform_get_drvdata(pdev); priv->soc->swpriv = gsw; + gsw->ephy_disable = of_property_read_bool(np, "mediatek,ephy-disable"); + mdiobus_node = of_get_child_by_name(eth_node, "mdio-bus"); if (mdiobus_node) { for_each_child_of_node(mdiobus_node, phy_node) { id = of_get_property(phy_node, "reg", NULL); if (id && (be32_to_cpu(*id) == 0x1f)) - of_node_put(mdiobus_node); + gsw->ephy_disable = true; } + + of_node_put(mdiobus_node); } gsw->port4_ephy = !of_property_read_bool(np, "mediatek,port4-gmac"); diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h index 91a0399976..fde7792c02 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620.h @@ -92,6 +92,7 @@ struct mt7620_gsw { struct device *dev; void __iomem *base; int irq; + bool ephy_disable; bool port4_ephy; unsigned long int autopoll; u16 ephy_base;