From: Andrew Lunn Date: Wed, 6 Jan 2016 19:11:06 +0000 (+0100) Subject: phy: Consistently use addr for address on an MII bus X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ccaa953e9fc7ebb90fba4e4815966683bef4866f;p=openwrt%2Fstaging%2Fblogic.git phy: Consistently use addr for address on an MII bus Within phy.h, an address on an MII bus has been called both addr and phy_id. phy_id is particularly confusion, since it also means the ID found in register 3, if the device on the bus is a phy. Consistently use addr. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/include/linux/phy.h b/include/linux/phy.h index a89cb0eef911..77b5e56e2a92 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -158,8 +158,8 @@ struct mii_bus { const char *name; char id[MII_BUS_ID_SIZE]; void *priv; - int (*read)(struct mii_bus *bus, int phy_id, int regnum); - int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val); + int (*read)(struct mii_bus *bus, int addr, int regnum); + int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); int (*reset)(struct mii_bus *bus); /*