From: Robert Marko <robert.marko@sartura.hr>
Date: Wed, 8 Dec 2021 13:44:05 +0000 (+0100)
Subject: ipq40xx: disable nodes instead of deleting them
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ccd08ef9128342b66fe4801b74c56e8e275f7f0a;p=openwrt%2Fstaging%2Fjogo.git

ipq40xx: disable nodes instead of deleting them

There is no reason to delete the DT PHY nodes
as you can just disable them.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
index f1bd88f942..29d51aa9e1 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-magic-2-wifi-next.dts
@@ -24,9 +24,6 @@
 			pinctrl-names = "default";
 			reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
 			reset-delay-us = <2000>;
-
-			/delete-node/ ethernet-phy@0;
-			/delete-node/ ethernet-phy@1;
 		};
 
 		crypto@8e3a000 {
@@ -152,6 +149,14 @@
 	status = "okay";
 };
 
+&ethphy0 {
+	status = "disabled";
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
 &wifi0 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "devolo,magic-2-wifi-next";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
index ed9996f097..2407698fe1 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wrtq-329acn.dts
@@ -47,10 +47,6 @@
 
 		mdio@90000 {
 			status = "okay";
-
-			/delete-node/ ethernet-phy@0;
-			/delete-node/ ethernet-phy@1;
-			/delete-node/ ethernet-phy@3;
 		};
 
 		tcsr@1949000 {
@@ -256,6 +252,18 @@
 	status = "okay";
 };
 
+&ethphy0 {
+	status = "disabled";
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&ethphy3 {
+	status = "disabled";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
index 459f4a3384..20b981a372 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
@@ -26,12 +26,6 @@
 			status = "okay";
 			pinctrl-0 = <&mdio_pins>;
 			pinctrl-names = "default";
-
-			/delete-node/ ethernet-phy@1;
-			/delete-node/ ethernet-phy@2;
-			/delete-node/ ethernet-phy@3;
-			/delete-node/ ethernet-phy@4;
-			/delete-node/ psgmii-phy@5;
 		};
 
 		tcsr@1949000 {
@@ -243,6 +237,30 @@
 	status = "okay";
 };
 
+&ethphy0 {
+	status = "disabled";
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&ethphy2 {
+	status = "disabled";
+};
+
+&ethphy3 {
+	status = "disabled";
+};
+
+&ethphy4 {
+	status = "disabled";
+};
+
+&psgmiiphy {
+	status = "disabled";
+};
+
 &wifi0 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
index a91a7fae17..c208bf33ee 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
@@ -47,12 +47,6 @@
 
 		mdio@90000 {
 			status = "okay";
-
-			/delete-node/ ethernet-phy@1;
-			/delete-node/ ethernet-phy@2;
-			/delete-node/ ethernet-phy@3;
-			/delete-node/ ethernet-phy@4;
-			/delete-node/ psgmii-phy@5;
 		};
 
 		counter@4a1000 {
@@ -247,3 +241,23 @@
 		};
 	};
 };
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&ethphy2 {
+	status = "disabled";
+};
+
+&ethphy3 {
+	status = "disabled";
+};
+
+&ethphy4 {
+	status = "disabled";
+};
+
+&psgmiiphy {
+	status = "disabled";
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
index da2067454c..0925561ed0 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
@@ -21,13 +21,6 @@
 			pinctrl-0 = <&mdio_pins>;
 			pinctrl-names = "default";
 
-			/delete-node/ ethernet-phy@0;
-			/delete-node/ ethernet-phy@1;
-			/delete-node/ ethernet-phy@2;
-			/delete-node/ ethernet-phy@3;
-			/delete-node/ ethernet-phy@4;
-			/delete-node/ psgmii-phy@5;
-
 			ethernet-phy@5 {
 				reg = <0x5>;
 			};
@@ -221,6 +214,30 @@
 	};
 };
 
+&ethphy0 {
+	status = "disabled";
+};
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&ethphy2 {
+	status = "disabled";
+};
+
+&ethphy3 {
+	status = "disabled";
+};
+
+&ethphy4 {
+	status = "disabled";
+};
+
+&psgmiiphy {
+	status = "disabled";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration", "mac-address";