From: Romain MARIADASSOU Date: Tue, 26 Jun 2018 23:24:39 +0000 (+0200) Subject: ramips: add support for TL-WA801ND v5 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ce31bdc20c3f2eb387a84c277dff76324a8e39c7;p=openwrt%2Fstaging%2Fjow.git ramips: add support for TL-WA801ND v5 Specification: - System-On-Chip: MediaTek MT7628NN - CPU/Speed: 580 MHz - Flash-Chip: ELM Technology GD25Q64 - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7628N 2.4GHz 802.11bgn Currently the only method to install openwrt for the first time is via TFTP recovery. After first install you can use regular updates. Flash instructions: 1) To flash the recovery image, start a TFTP server with IP address 192.168.0.66 and serve the recovery image named tp_recovery.bin. 2) Connect your device to the LAN port, then press the WPS and Reset button and power it up. Keep pressing the WPS/Reset button for 10 seconds or until the lock LED is lighting up. It will try to download the recovery image and flash it. It can take up to 2-3 minutes to finish. When it reaches 100%, the router will reboot itself. Signed-off-by: Romain MARIADASSOU --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 73f52339c5..75a226401f 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -429,6 +429,10 @@ tplink,c50-v3) ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" ;; +tplink,tl-wa801nd-v5) + ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" + ;; tplink,tl-mr3420-v5|\ tplink,tl-wr842n-v5) set_usb_led "$boardname:green:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 01355b4278..0de97a5780 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -58,6 +58,7 @@ ramips_setup_interfaces() omega2 | \ omega2p | \ timecloud|\ + tplink,tl-wa801nd-v5|\ w150m|\ widora,neo-16m|\ widora,neo-32m|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index d4fe14116a..a61fedbd7b 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -42,6 +42,7 @@ get_status_led() { r6220|\ tplink,c20-v4|\ tplink,c50-v3|\ + tplink,tl-wa801nd-v5|\ tplink,tl-mr3420-v5|\ tplink,tl-wr842n-v5|\ tplink,tl-wr902ac-v3|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index a2c6395cfb..4f9165b18b 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -259,6 +259,7 @@ platform_check_image() { tplink,c20-v4|\ tplink,c50-v3|\ tplink,tl-mr3420-v5|\ + tplink,tl-wa801nd-v5|\ tplink,tl-wr842n-v5|\ tplink,tl-wr902ac-v3|\ tl-wr840n-v4|\ diff --git a/target/linux/ramips/dts/TL-WA801NDV5.dts b/target/linux/ramips/dts/TL-WA801NDV5.dts new file mode 100644 index 0000000000..0d4f8467b9 --- /dev/null +++ b/target/linux/ramips/dts/TL-WA801NDV5.dts @@ -0,0 +1,57 @@ +/dts-v1/; + +#include "TPLINK-8M.dtsi" + +#include +#include + +/ { + compatible = "tplink,tl-wa801nd-v5", "mediatek,mt7628an-soc"; + model = "TP-Link TL-WA801ND v5"; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "tl-wa801nd-v5:green:power"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "tl-wa801nd-v5:green:lan"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "tl-wa801nd-v5:green:wlan"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "tl-wa801nd-v5:orange:wps"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "p0led_an", "perst", "refclk", "wdt", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 6c75002a84..eaafb149a2 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -114,6 +114,19 @@ define Device/pbr-d1 endef TARGET_DEVICES += pbr-d1 +define Device/tplink_tl-wa801nd-v5 + $(Device/tplink) + DTS := TL-WA801NDV5 + IMAGE_SIZE := 7808k + DEVICE_TITLE := TP-Link TL-WA801ND v5 + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0x08010005 + TPLINK_HWREV := 0x1 + TPLINK_HWREVADD := 0x5 + TPLINK_HVERSION := 3 +endef +TARGET_DEVICES += tplink_tl-wa801nd-v5 + define Device/tl-wr840n-v4 $(Device/tplink) DTS := TL-WR840NV4