From: David Bauer Date: Fri, 18 May 2018 21:37:49 +0000 (+0200) Subject: ramips: change wifi led trigger for Archer C50v3 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ce91c85e01050cb19c89c9a19369a56a94619e7f;p=openwrt%2Fstaging%2Fwigyori.git ramips: change wifi led trigger for Archer C50v3 This commit alters the TP-Link Archer C50v3 LED settings to use the phy trigger instead of the netdev one. This way the WiFi status is displayed even if the wifi interface name is altered. Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index b5de388764..88e4c2b7fe 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -410,8 +410,8 @@ tplink,c20-v4) tplink,c50-v3) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan1" - set_wifi_led "$boardname:green:wlan5g" + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" ;; tplink,tl-mr3420-v5) set_usb_led "$boardname:green:usb"