From: Roman Yeryomin Date: Fri, 4 May 2018 15:18:51 +0000 (+0300) Subject: gemini: fix hard disk boot on D-Link devices X-Git-Tag: v19.07.0-rc1~3825 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ce93b05bf1465b240366000f833e413c0b916125;p=openwrt%2Fstaging%2Fhauke.git gemini: fix hard disk boot on D-Link devices Since the D-Link devices boot from hard disk we need to add the following changes to Gemini: - Supply a bootarg in the device tree so we can boot from the right partition (/dev/sda4 on DNS-313) - Disable forced command line in config so the kernel picks up the right bootargs from the device tree - Enable EXT4 in the config as this is used for rootfs else we get nowhere, we cannot load this as a module because, well, it is supposed to be loaded from the root partition (chicken and egg problem). - Enable jbd2 and mbcache (needed by ext4) Also clean out the premature attempts to dynamically modify the command line in the Image makefile: we should pass this with the device tree bootargs instead, it works much better. Signed-off-by: Linus Walleij Signed-off-by: Roman Yeryomin --- diff --git a/target/linux/gemini/config-4.14 b/target/linux/gemini/config-4.14 index 034bbcf605..88ec795d22 100644 --- a/target/linux/gemini/config-4.14 +++ b/target/linux/gemini/config-4.14 @@ -56,7 +56,6 @@ CONFIG_CLKDEV_LOOKUP=y CONFIG_CLKSRC_MMIO=y CONFIG_CLONE_BACKWARDS=y CONFIG_CMDLINE="console=ttyS0,19200n8" -CONFIG_CMDLINE_FORCE=y CONFIG_COMMON_CLK=y CONFIG_COMMON_CLK_GEMINI=y CONFIG_COMPACTION=y @@ -153,6 +152,7 @@ CONFIG_ELF_CORE=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_EXPERT is not set CONFIG_EXPORTFS=y +CONFIG_EXT4_FS=y CONFIG_FARADAY_FTINTC010=y CONFIG_FHANDLE=y CONFIG_FIRMWARE_IN_KERNEL=y @@ -160,6 +160,7 @@ CONFIG_FIXED_PHY=y CONFIG_FIX_EARLYCON_MEM=y # CONFIG_FPE_FASTFPE is not set # CONFIG_FPE_NWFPE is not set +CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_FTTMR010_TIMER=y CONFIG_FTWDT010_WATCHDOG=y @@ -255,6 +256,7 @@ CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_WORK=y # CONFIG_ISDN is not set +CONFIG_JBD2=y CONFIG_KALLSYMS=y CONFIG_KERNEL_LZMA=y # CONFIG_KERNEL_XZ is not set diff --git a/target/linux/gemini/image/Makefile b/target/linux/gemini/image/Makefile index dca3b63b19..25371f6f13 100644 --- a/target/linux/gemini/image/Makefile +++ b/target/linux/gemini/image/Makefile @@ -70,24 +70,20 @@ endef # of devices out of the box (former NAS42x0 IcyBox defaults) GEMINI_NAS_PACKAGES:=kmod-md-mod kmod-md-linear kmod-md-multipath \ kmod-md-raid0 kmod-md-raid1 kmod-md-raid10 kmod-md-raid456 \ - kmod-fs-btrfs kmod-fs-cifs kmod-fs-ext4 kmod-fs-nfs \ + kmod-fs-btrfs kmod-fs-cifs kmod-fs-nfs \ kmod-fs-nfsd kmod-fs-ntfs kmod-fs-reiserfs kmod-fs-vfat \ kmod-nls-utf8 kmod-usb-storage-extras \ samba36-server mdadm cfdisk fdisk e2fsprogs badblocks -DIR685_CMDLINE:=-console=ttyS0,19200n8 root=/dev/sda1 rw rootwait define Device/dlink-dir-685 DEVICE_TITLE := D-Link DIR-685 Xtreme N Storage Router - CMDLINE := $(DIR685_CMDLINE) DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) \ kmod-switch-rtl8366rb swconfig endef TARGET_DEVICES += dlink-dir-685 -DNS313_CMDLINE:=-console=ttyS0,19200n8 root=/dev/sda4 rw rootwait define Device/dlink-dns-313 DEVICE_TITLE := D-Link DNS-313 1-Bay Network Storage Enclosure - CMDLINE := $(DNS313_CMDLINE) DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) IMAGES += dns313-image IMAGE/dns313-image := dns313-images @@ -108,10 +104,8 @@ define Device/rut1xx endef TARGET_DEVICES += rut1xx -SQ201_CMDLINE:=-console=ttyS0,115200n8 define Device/sq201 DEVICE_TITLE := ITian Square One SQ201 - CMDLINE := $(SQ201_CMDLINE) DEVICE_PACKAGES := $(GEMINI_NAS_PACKAGES) rt61-pci-firmware endef TARGET_DEVICES += sq201 diff --git a/target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch b/target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch new file mode 100644 index 0000000000..f8cf123d7b --- /dev/null +++ b/target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch @@ -0,0 +1,45 @@ +From 5813b729eb9fe91fcf895a5c2f30bf34fbd46379 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Wed, 2 May 2018 09:17:25 +0200 +Subject: [PATCH] ARM: dts: Fix bootargs for Gemini D-Link devices + +These machines need to be booted from very specific harddisk +partitions (as the D-Link DNS-313 boots specifically from +partition 4). Add the proper bootargs so that everything works +smoothly. + +Signed-off-by: Linus Walleij +--- + arch/arm/boot/dts/gemini-dlink-dir-685.dts | 3 ++- + arch/arm/boot/dts/gemini-dlink-dns-313.dts | 1 + + 2 files changed, 3 insertions(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts +index a39914dece98..840f4a32f37c 100644 +--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts ++++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts +@@ -20,7 +20,8 @@ + }; + + chosen { +- stdout-path = "uart0:115200n8"; ++ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; ++ stdout-path = "uart0:19200n8"; + }; + + gpio_keys { +diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts +index 4904f1251671..685719a0b8c0 100644 +--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts ++++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts +@@ -26,6 +26,7 @@ + }; + + chosen { ++ bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait"; + stdout-path = "uart0:19200n8"; + }; + +-- +2.14.3 +