From: Alexey Bartenev <41exey@proton.me> Date: Wed, 31 May 2023 14:50:23 +0000 (-0400) Subject: ramips: add support for D-Link DIR-806A B1 router X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ce998cb6e161db9c9e868fd570da9189f05fde3e;p=openwrt%2Fstaging%2Fdangole.git ramips: add support for D-Link DIR-806A B1 router General specification: SoC Type: MediaTek MT7620A (580MHz) ROM: 8 MB SPI-NOR (MX25L6406E) RAM: 64 MB DDR (W9751G6KB-25) Switch: MediaTek MT7530 Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4) Wireless: 2.4 GHz (MediaTek RT5390): b/g/n Wireless: 5 GHz (MediaTek MT7610EN): ac/n Buttons: 2 button (POWER, WPS/RESET) Bootloader: U-Boot 1.1.3 Power: 12 VDC, 0.5 A MACs: | LAN | [Factory + 0x04] - 2 | | WLAN 2.4g | [Factory + 0x04] - 1 | | WLAN 5g | [Factory + 0x8004] - 3 | | WAN | [Factory + 0x04] - 2 | OEM easy installation: 1. Use a PC to browse to http://192.168.0.1. 2. Go to the System section and open the Firmware Update section. 3. Under the Local Update at the right, click on the CHOOSE FILE... 4. When a modal window appears, choose the firmware file and click on the Open. 5. Next click on the UPDATE FIRMWARE button and upload the firmware image. Wait for the router to flash and reboot. OEM installation using the TFTP method (need level converter): 1. Download the latest firmware image. 2. Set up a Tftp server on a PC (e.g. Tftpd32) and place the firmware image to the root directory of the server. 3. Power off the router and use a twisted pair cable to connect the PC to any of the router's LAN ports. 4. Configure the network adapter of the PC to use IP address 192.168.0.180 and subnet mask 255.255.255.0. 5. Connect serial port (57600 8N1) and turn on the router. 6. Then interrupt "U-Boot Boot Menu" by hitting 2 key (select "2: Load system code then write to Flash via TFTP."). 7. Press Y key when show "Warning!! Erase Linux in Flash then burn new one. Are you sure? (Y/N)" Input device IP (192.168.0.1) ==:192.168.0.1 Input server IP (192.168.0.180) ==:192.168.0.180 Input Linux Kernel filename () ==:firmware_name The router should download the firmware via TFTP and complete flashing in a few minutes. After flashing is complete, use the PC to browse to http://192.168.1.1 or ssh to proceed with the configuration. Signed-off-by: Alexey Bartenev <41exey@proton.me> --- diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index b3f37c7c3e..85a819be31 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -24,7 +24,8 @@ sitecom,wlr-4100-v1-002|\ zyxel,keenetic-lite-iii-a) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x1000" ;; -arcadyan,we420223-99) +arcadyan,we420223-99|\ +dlink,dir-806a-b1) ubootenv_add_uci_config "/dev/mtd2" "0x0" "0x1000" "0x1000" ;; allnet,all0256n-4m|\ diff --git a/target/linux/ramips/dts/mt7620a_dlink_dir-806a-b1.dts b/target/linux/ramips/dts/mt7620a_dlink_dir-806a-b1.dts new file mode 100755 index 0000000000..b7fc063b7f --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_dlink_dir-806a-b1.dts @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620a.dtsi" + +#include +#include +#include + +/ { + compatible = "dlink,dir-806a-b1", "ralink,mt7620a-soc"; + model = "D-Link DIR-806A B1"; + + aliases { + led-boot = &wps_led; + led-failsafe = &wps_led; + led-running = &wps_led; + led-upgrade = &wps_led; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; // #12 + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + wifi_led: 2.4g { + label = "green:wlan"; + color = ; + function = LED_FUNCTION_WLAN; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; // #72 + }; + + wps_led: wps { + label = "green:wps"; + color = ; + function = LED_FUNCTION_WPS; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; // #39 + }; + + }; + +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <48000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ALL"; + reg = <0x0 0x800000>; + read-only; + }; + + partition@0_1 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + }; + + factory: partition@40000 { + label = "Factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uartf", "ephy"; + function = "gpio"; + }; +}; + +ðernet { + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <(-2)>; +}; + +&wmac { + pinctrl-names = "default", "pa_gpio"; + pinctrl-0 = <&pa_pins>; + pinctrl-1 = <&pa_gpio_pins>; + + ralink,mtd-eeprom = <&factory 0x0>; + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <(-1)>; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + + nvmem-cells = <&macaddr_factory_8004>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <(-3)>; + + led { + led-active-low; + }; + }; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_4: macaddr@4 { + reg = <0x4 0x6>; + }; + + macaddr_factory_8004: macaddr@8004 { + reg = <0x8004 0x6>; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index cd7aea7388..f3f4873d76 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -223,6 +223,19 @@ define Device/dlink_dir-510l endef TARGET_DEVICES += dlink_dir-510l +define Device/dlink_dir-806a-b1 + SOC := mt7620a + IMAGE_SIZE := 7872k + DEVICE_VENDOR := D-Link + DEVICE_MODEL := DIR-806A + DEVICE_VARIANT := B1 + DEVICE_PACKAGES += kmod-mt76x0e + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size | \ + sign-dlink-ru cef285a2e29e40b2baab31277d44298b +endef +TARGET_DEVICES += dlink_dir-806a-b1 + define Device/dlink_dir-810l SOC := mt7620a DEVICE_PACKAGES := kmod-mt76x0e diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index af2f574aef..22e79ca755 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -44,6 +44,9 @@ comfast,cf-wr800n) ucidef_set_led_netdev "lan" "lan" "white:ethernet" eth0.1 ucidef_set_led_netdev "wifi_led" "wifi" "white:wifi" "wlan0" ;; +dlink,dir-806a-b1) + ucidef_set_led_netdev "wifi_led" "2.4g" "green:wlan" "phy1-ap0" + ;; dlink,dir-810l|\ trendnet,tew-810dr) ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x10" diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 005b7212cb..a0174d2d1c 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -79,6 +79,7 @@ ramips_setup_interfaces() asus,rt-ac54u|\ asus,rt-n14u|\ bdcom,wap2100-sk|\ + dlink,dir-806a-b1|\ domywifi,dm202|\ domywifi,dm203|\ domywifi,dw22d|\