From: Wolfram Sang Date: Fri, 24 Aug 2018 14:52:46 +0000 (+0200) Subject: i2c: sh_mobile: fix leak when using DMA bounce buffer X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=cebc07d84ad71bc58d6f59b770e4347da48a5a2b;p=openwrt%2Fstaging%2Fblogic.git i2c: sh_mobile: fix leak when using DMA bounce buffer We only freed the bounce buffer after successful DMA, missing the cases where DMA setup may have gone wrong. Use a better location which always gets called after each message and use 'stop_after_dma' as a flag for a successful transfer. Signed-off-by: Wolfram Sang Reviewed-by: Niklas Söderlund Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index b965d52338ba..818cab14e87c 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -507,8 +507,6 @@ static void sh_mobile_i2c_dma_callback(void *data) pd->pos = pd->msg->len; pd->stop_after_dma = true; - i2c_put_dma_safe_msg_buf(pd->dma_buf, pd->msg, true); - iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE); } @@ -706,6 +704,10 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, timeout = wait_event_timeout(pd->wait, pd->sr & (ICSR_TACK | SW_DONE), adapter->timeout); + + /* 'stop_after_dma' tells if DMA transfer was complete */ + i2c_put_dma_safe_msg_buf(pd->dma_buf, pd->msg, pd->stop_after_dma); + if (!timeout) { dev_err(pd->dev, "Transfer request timed out\n"); if (pd->dma_direction != DMA_NONE)