From: Felix Fietkau Date: Thu, 26 Mar 2015 23:33:56 +0000 (+0000) Subject: hostapd: package wpad-mesh and wpa_supplicant-mesh variants X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=cec80c72678c970c459d26239a7be89d5b225f0e;p=openwrt%2Fstaging%2Fynezz.git hostapd: package wpad-mesh and wpa_supplicant-mesh variants These new variants include support for mesh mode and SAE crypto. They always depend on openssl as EC operations are not provided by the internal crypto implementation. Signed-off-by: Daniel Golle SVN-Revision: 45047 --- diff --git a/package/network/services/hostapd/Config.in b/package/network/services/hostapd/Config.in index b39be38fd0..65125a36df 100644 --- a/package/network/services/hostapd/Config.in +++ b/package/network/services/hostapd/Config.in @@ -1,7 +1,7 @@ # wpa_supplicant config config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK bool "Disable timestamp check" - depends on PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini + depends on PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mesh || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini || PACAKGE_wpad-mesh default n help This disables the timestamp check for certificates in wpa_supplicant @@ -10,10 +10,11 @@ config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK choice prompt "Choose TLS provider" default WPA_SUPPLICANT_INTERNAL - depends on PACKAGE_wpa-supplicant || PACKAGE_wpad + depends on PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mesh || PACKAGE_wpad || PACKAGE_wpad-mesh config WPA_SUPPLICANT_INTERNAL bool "internal" + depends on PACKAGE_wpa-supplicant || PACKAGE_wpad config WPA_SUPPLICANT_OPENSSL bool "openssl" @@ -23,7 +24,7 @@ endchoice config WPA_RFKILL_SUPPORT bool "Add rfkill support" - depends on PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini + depends on PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mesh || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini || PACKAGE_wpad-mesh default n config WPA_MSG_MIN_PRIORITY diff --git a/package/network/services/hostapd/Makefile b/package/network/services/hostapd/Makefile index 3b45324493..b9a705143f 100644 --- a/package/network/services/hostapd/Makefile +++ b/package/network/services/hostapd/Makefile @@ -1,4 +1,3 @@ -# # Copyright (C) 2006-2014 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. @@ -48,6 +47,10 @@ ifeq ($(LOCAL_TYPE),supplicant) CONFIG_WPA_SUPPLICANT_INTERNAL \ CONFIG_WPA_SUPPLICANT_OPENSSL endif + ifeq ($(LOCAL_VARIANT),mesh) + PKG_CONFIG_DEPENDS += \ + CONFIG_WPA_SUPPLICANT_OPENSSL + endif endif PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) @@ -74,6 +77,10 @@ ifneq ($(LOCAL_TYPE),hostapd) TARGET_LDFLAGS += -lcrypto -lssl endif endif + ifeq ($(LOCAL_VARIANT),mesh) + DRIVER_MAKEOPTS += CONFIG_TLS=openssl + TARGET_LDFLAGS += -lcrypto -lssl + endif ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK TARGET_CFLAGS += -DNO_TIMESTAMP_CHECK endif @@ -103,7 +110,7 @@ define Package/hostapd $(call Package/hostapd/Default) TITLE+= (full) VARIANT:=full - CONFLICTS:=wpad wpad-mini + CONFLICTS:=wpad wpad-mini wpad-mesh endef define Package/hostapd/description @@ -115,7 +122,7 @@ define Package/hostapd-mini $(call Package/hostapd/Default) TITLE+= (WPA-PSK only) VARIANT:=mini - CONFLICTS:=wpad wpad-mini + CONFLICTS:=wpad wpad-mini wpad-mesh endef define Package/hostapd-mini/description @@ -125,7 +132,7 @@ endef define Package/hostapd-utils $(call Package/hostapd/Default) TITLE+= (utils) - DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini||PACKAGE_wpad||PACKAGE_wpad-mini + DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini||PACKAGE_wpad||PACKAGE_wpad-mesh||PACKAGE_wpad-mini endef define Package/hostapd-utils/description @@ -163,13 +170,25 @@ define Package/wpad-mini/description This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only). endef +define Package/wpad-mesh +$(call Package/wpad/Default) + TITLE+= (with 802.11s mesh and SAE support) + DEPENDS:=$(DRV_DEPENDS) +libubus +libopenssl +@CONFIG_WPA_SUPPLICANT_OPENSSL + CONFLICTS:=@WPA_SUPPLICANT_INTERNAL + VARIANT:=wpad-mesh +endef + +define Package/wpad-mesh/description + This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (with 802.11s mesh and SAE support). +endef + define Package/wpa-supplicant SECTION:=net CATEGORY:=Network TITLE:=WPA Supplicant URL:=http://hostap.epitest.fi/wpa_supplicant/ DEPENDS:=$(DRV_DEPENDS) +WPA_SUPPLICANT_OPENSSL:libopenssl - CONFLICTS:=wpad wpad-mini + CONFLICTS:=wpad wpad-mini wpad-mesh VARIANT:=supplicant-full endef @@ -185,7 +204,7 @@ define Package/wpa-supplicant-p2p $(Package/wpa-supplicant) TITLE:=WPA Supplicant (with Wi-Fi P2P support) DEPENDS:=$(DRV_DEPENDS) - CONFLICTS:=wpad wpad-mini + CONFLICTS:=wpad wpad-mini wpad-mesh VARIANT:=supplicant-p2p endef @@ -193,11 +212,23 @@ define Package/wpa-supplicant-p2p/Description WPA Supplicant (with Wi-Fi P2P support) endef +define Package/wpa-supplicant-mesh + $(Package/wpa-supplicant) + TITLE:=WPA Supplicant (with 802.11s and SAE) + DEPENDS:=$(DRV_DEPENDS) + CONFLICTS:=wpad wpad-mesh wpad-mesh + VARIANT:=supplicant-mesh +endef + +define Package/wpa-supplicant-mesh/Description + WPA Supplicant (variant with 802.11s and SAE support) +endef + define Package/wpa-supplicant-mini $(Package/wpa-supplicant) TITLE:=WPA Supplicant (minimal version) DEPENDS:=$(DRV_DEPENDS) - CONFLICTS:=wpad wpad-mini + CONFLICTS:=wpad wpad-mini wpad-mesh VARIANT:=supplicant-mini endef @@ -208,7 +239,7 @@ endef define Package/wpa-cli SECTION:=net CATEGORY:=Network - DEPENDS:=@PACKAGE_wpa-supplicant||PACKAGE_wpa-supplicant-p2p||PACKAGE_wpad-mini||PACKAGE_wpad + DEPENDS:=@PACKAGE_wpa-supplicant||PACKAGE_wpa-supplicant-p2p||PACKAGE_wpad-mini||PACKAGE_wpad||PACKAGE_wpad-mesh TITLE:=WPA Supplicant command line interface endef @@ -372,6 +403,7 @@ define Package/wpad/install $(LN) wpad $(1)/usr/sbin/wpa_supplicant endef Package/wpad-mini/install = $(Package/wpad/install) +Package/wpad-mesh/install = $(Package/wpad/install) define Package/wpa-supplicant/install $(call Install/supplicant,$(1)) @@ -397,8 +429,10 @@ endif $(eval $(call BuildPackage,hostapd)) $(eval $(call BuildPackage,hostapd-mini)) $(eval $(call BuildPackage,wpad)) +$(eval $(call BuildPackage,wpad-mesh)) $(eval $(call BuildPackage,wpad-mini)) $(eval $(call BuildPackage,wpa-supplicant)) +$(eval $(call BuildPackage,wpa-supplicant-mesh)) $(eval $(call BuildPackage,wpa-supplicant-mini)) $(eval $(call BuildPackage,wpa-supplicant-p2p)) $(eval $(call BuildPackage,wpa-cli)) diff --git a/package/network/services/hostapd/files/wpa_supplicant-mesh.config b/package/network/services/hostapd/files/wpa_supplicant-mesh.config new file mode 100644 index 0000000000..36e29088c4 --- /dev/null +++ b/package/network/services/hostapd/files/wpa_supplicant-mesh.config @@ -0,0 +1,407 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed OpenSSL +# or GnuTLS in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Example configuration for various cross-compilation platforms + +#### sveasoft (e.g., for Linksys WRT54G) ###################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS += -I../src/include -I../../src/router/openssl/include +#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl +############################################################################### + +#### openwrt (e.g., for Linksys WRT54G) ####################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ +# -I../WRT54GS/release/src/include +#LIBS = -lssl +############################################################################### + + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for ndiswrapper +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +# CONFIG_DRIVER_ATMEL=y + +# Driver interface for old Broadcom driver +# Please note that the newer Broadcom driver ("hybrid Linux driver") supports +# Linux wireless extensions and does not need (or even work) with the old +# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. +#CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100/2200 driver +# Deprecated; use CONFIG_DRIVER_WEXT=y instead. +#CONFIG_DRIVER_IPW=y + +# Driver interface for Ralink driver +#CONFIG_DRIVER_RALINK=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Include client MLME (management frame processing) for test driver +# This can be used to test MLME operations in hostapd with the test interface. +# space. +#CONFIG_CLIENT_MLME=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + +# Driver interface for no driver (e.g., WPS ER only) +#CONFIG_DRIVER_NONE=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-FAST +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + +# EAP-SAKE +#CONFIG_EAP_SAKE=y + +# EAP-GPSK +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# EAP-TNC and related Trusted Network Connect support (experimental) +#CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets using localhost (127.0.0.1) +# named_pipe = Windows Named Pipe (default for Windows) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to +# save about 1 kB in code size when building only WPA-Personal (no EAP support) +# or 6 kB if building for WPA-Enterprise. +#CONFIG_NO_WPA2=y + +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operatins system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +# eloop_none = Empty template +#CONFIG_ELOOP=eloop + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) +CONFIG_PEERKEY=y + +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +CONFIG_IEEE80211W=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=internal + +# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. +# You need CONFIG_TLS=gnutls for this to have any effect. Please note that +# even though the core GnuTLS library is released under LGPL, this extra +# library uses GPL and as such, the terms of GPL apply to the combination +# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not +# apply for distribution of the resulting binary. +#CONFIG_GNUTLS_EXTRA=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for old DBus control interface +# (fi.epitest.hostap.WPASupplicant) +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for new DBus control interface +# (fi.w1.hostap.wpa_supplicant1) +#CONFIG_CTRL_IFACE_DBUS_NEW=y + +# Add introspection support for new DBus control interface +#CONFIG_CTRL_IFACE_DBUS_INTRO=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +#CONFIG_DYNAMIC_EAP_METHODS=y + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y + +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, comment out these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, comment out these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +CONFIG_NO_RANDOM_POOL=y +NEED_80211_COMMON=y + +CONFIG_IBSS_RSN=y + +CONFIG_MESH=y +CONFIG_SAE=y +CONFIG_AP=y