From: David Bauer Date: Thu, 30 Jul 2020 20:33:53 +0000 (+0200) Subject: ramips: limit 5GHz channels for RAVPower RP-WD009 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ced167d72971e125825941dae22aad1d318c9dd2;p=openwrt%2Fstaging%2Fblocktrron.git ramips: limit 5GHz channels for RAVPower RP-WD009 When selecting a channel below 100 on the 5GHz radio, the channel will be detected as busy all the time. Survey data from wlan1 frequency: 5240 MHz [in use] channel active time: 165729 ms channel busy time: 158704 ms channel transmit time: 0 ms Channels 100 and above work fine: Survey data from wlan1 frequency: 5500 MHz channel active time: 133000 ms channel busy time: 21090 ms channel transmit time: 0 ms Limit the available channels, so users do not have the impression their device is broken. Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/dts/mt7628an_ravpower_rp-wd009.dts b/target/linux/ramips/dts/mt7628an_ravpower_rp-wd009.dts index 5f556af1d3..f592681eb1 100644 --- a/target/linux/ramips/dts/mt7628an_ravpower_rp-wd009.dts +++ b/target/linux/ramips/dts/mt7628an_ravpower_rp-wd009.dts @@ -120,7 +120,7 @@ wifi@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; + ieee80211-freq-limit = <5470000 6000000>; }; };