From: Jesper Dangaard Brouer <brouer@redhat.com>
Date: Thu, 3 Nov 2016 13:56:01 +0000 (+0100)
Subject: net: make default TX queue length a defined constant
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d0a81f67cd6286d32f42a167d19c7a387c23db79;p=openwrt%2Fstaging%2Fblogic.git

net: make default TX queue length a defined constant

The default TX queue length of Ethernet devices have been a magic
constant of 1000, ever since the initial git import.

Looking back in historical trees[1][2] the value used to be 100,
with the same comment "Ethernet wants good queues". The commit[3]
that changed this from 100 to 1000 didn't describe why, but from
conversations with Robert Olsson it seems that it was changed
when Ethernet devices went from 100Mbit/s to 1Gbit/s, because the
link speed increased x10 the queue size were also adjusted.  This
value later caused much heartache for the bufferbloat community.

This patch merely moves the value into a defined constant.

[1] https://git.kernel.org/cgit/linux/kernel/git/davem/netdev-vger-cvs.git/
[2] https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/
[3] https://git.kernel.org/tglx/history/c/98921832c232

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index cd334c9584e9..f1b76b8e6d2d 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -6,6 +6,8 @@
 #include <linux/if_vlan.h>
 #include <net/sch_generic.h>
 
+#define DEFAULT_TX_QUEUE_LEN	1000
+
 struct qdisc_walker {
 	int	stop;
 	int	skip;
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index d9e2fe1da724..8c5a479681ca 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -62,6 +62,7 @@
 #include <net/dsa.h>
 #include <net/flow_dissector.h>
 #include <linux/uaccess.h>
+#include <net/pkt_sched.h>
 
 __setup("ether=", netdev_boot_setup);
 
@@ -359,7 +360,7 @@ void ether_setup(struct net_device *dev)
 	dev->min_mtu		= ETH_MIN_MTU;
 	dev->max_mtu		= ETH_DATA_LEN;
 	dev->addr_len		= ETH_ALEN;
-	dev->tx_queue_len	= 1000;	/* Ethernet wants good queues */
+	dev->tx_queue_len	= DEFAULT_TX_QUEUE_LEN;
 	dev->flags		= IFF_BROADCAST|IFF_MULTICAST;
 	dev->priv_flags		|= IFF_TX_SKB_SHARING;