From: Sungbo Eo <mans0n@gorani.run>
Date: Sat, 21 Dec 2019 12:43:24 +0000 (+0900)
Subject: ipq40xx: remove unnecessary usb nodes in DTS for ASUS RT-AC58U
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d0efb1ba95f34b70dca759b6cfeb854be43a4edf;p=openwrt%2Fstaging%2Fadrian.git

ipq40xx: remove unnecessary usb nodes in DTS for ASUS RT-AC58U

RT-AC58U has single USB 3.0 port, and only usb3_port1 is actually used.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
---

diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
index 4e5559386e..f046bdcb5e 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
@@ -58,20 +58,6 @@
 			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 		};
 
-		usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb2_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
 		usb3@8af8800 {
 			status = "okay";
 
@@ -83,11 +69,6 @@
 					reg = <1>;
 					#trigger-source-cells = <0>;
 				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
 			};
 		};
 
@@ -162,7 +143,7 @@
 		usb {
 			label = "rt-ac58u:blue:usb";
 			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
+			trigger-sources = <&usb3_port1>;
 			linux,default-trigger = "usbport";
 		};
 
@@ -316,7 +297,3 @@
 &usb3_hs_phy {
 	status = "okay";
 };
-
-&usb2_hs_phy {
-	status = "okay";
-};
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
index a569a158fd..331d8e4d74 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
@@ -62,20 +62,6 @@
 			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 		};
 
-		usb2@60f8800 {
-			status = "okay";
-
-			dwc3@6000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				usb2_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
 		usb3@8af8800 {
 			status = "okay";
 
@@ -87,11 +73,6 @@
 					reg = <1>;
 					#trigger-source-cells = <0>;
 				};
-
-				usb3_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
 			};
 		};
 
@@ -156,7 +137,7 @@
 		usb {
 			label = "rt-ac58u:blue:usb";
 			gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
+			trigger-sources = <&usb3_port1>;
 			linux,default-trigger = "usbport";
 		};
 
@@ -312,10 +293,6 @@
 	status = "okay";
 };
 
-&usb2_hs_phy {
-	status = "okay";
-};
-
 &wifi0 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "RT-AC58U";