From: Arnd Bergmann Date: Sat, 19 Apr 2014 03:21:41 +0000 (+0530) Subject: phy: exynos: fix building as a module X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=d1481832f1dbb9d10fab27269631a130fa082f03;p=openwrt%2Fstaging%2Fblogic.git phy: exynos: fix building as a module The top-level phy-samsung-usb2 driver may be configured as a loadable module, which currently causes link errors because of the dependency on the exynos{5250,4x12,4210}_usb2_phy_config symbol. Solving this could be achieved by exporting these symbols, but as the SoC-specific parts of the driver are not currently built as modules, it seems better to just link everything into one module and avoid the need for the export. Signed-off-by: Arnd Bergmann Acked-by: Kamil Debski Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 2faf78edc864..7728518572a4 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -13,8 +13,9 @@ obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-samsung-usb2.o -obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o -obj-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o -obj-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o +phy-exynos-usb2-y += phy-samsung-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o